TB1A/10KNM

Drehmoment-Referenzaufnehmer TB1A/10kN·m

Reference torque measuring disc
Strain gauges measuring system
Accuracy class: 0.05
Fixed connecting cable
3m, with free ends
Torque introduction via flange
Torque output signal 1.5mV/V

expand_more

chevron_left

Überblick
Dokumente
Downloads
Specifications
Accessories

chevron_right

Reference torque transducer TB1A: Space-saving, flat design

The TB1A reference torque transducer is very flat with a maximum width (depending on the measuring range) of 69 millimeters and is therefore, is ideally suited for torque measurements in restricted space conditions. In addition, the drive shafts can lead axially through the torque sensor, thanks to the central bore. Due to itsthe compact design, the transducer is very well- suited for use in testing machines or as a reaction torque sensor with the direct coupling of the drive motor or transmission.

Owing to its flat design, the TB1A has a very high stiffness in all directions and is the compact alternative to the extremely precise reference torque transducer TB2.

HBM accuracy class: up to 0.05
Degree of protection (according to EN 60 529): up to IP54
Nominal (rated) measuring range: 100 Nm to 10 kNm

Versatile

High accuracy and linearity with a low hysteresis of up to 0.05%
Available in 7 nominal maximum torque capacities (100 Nm, 200 Nm, 500 Nm, 1 kNm, 2 kNm, 5 kNm, 10 kNm)
Central bore allows the axial movement of the shaft
Extremely flat design with very small space requirements and a maximum installation length of 69 mm

Wide range of applications thanks to the flat design and central bore

High stiffness

High rotational, bending and transverse stiffness
Dynamic measurement characteristics and high natural frequency
Extremely small design saves space in the test bench

High torsional, transverse, and bending stiffness for efficient use

TB1A - Datenblatt	Data Sheets	German
TB1A - Montageanleitung	Mounting Instructions	English, French, German

Key Attributes: Torque Transducers
Typ (rotierend/nicht-rotierend)	Non-rotating
Messbereich	10 kNm
Messbereich	88507 in-lb
Geometrie (Flansch/Schaft)	Flange
Nenndrehzahl	0 rpm
Genauigkeitsklasse	0.05
Größe (Länge)	238 mm
Größe (Länge)	9.37 in
Gewicht (Material)	Steel
Integrierte Drehzahlmessung	false
Marine certification	None
Ausgangssignal	Voltage (+/- 10V)
Minimaltemperatur	-10 °C
Maximaltemperatur	60 °C
Minimaltemperatur	14 °F
Maximaltemperatur	140 °F

Main Menu

Main Menu

Main Menu

Main Menu

Drehmoment-Referenzaufnehmer TB1A/10kN·m

Reference torque transducer TB1A: Space-saving, flat design

Versatile

High stiffness

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com