TA11K3/1K0BE

S-DMS 3/1000BE TA11K

Strain gauge with options series A
(Strain gauge for Transducers)
Geometry: T rosette
Measuring grid material: constantan
Carrier foil: PEEKF
2 grids, offset 90° to each other
Measuring grid covered
'Stick-on' (with applied adhesive layer)
Temp. resp.: ferr. steel (10.8 ppm/K)
Creep adjustment: K (eq. to u = 6s)
Nominal resistance: 1000 ohms
Measuring grid length: 3 mm
Contents per package: 100 pcs.

expand_more

chevron_left

Überblick
Dokumente
Downloads
Specifications
Accessories

chevron_right

A Series Transducer Strain Gauges: Ensure Maximum Precision and Quality of Your Transducers

The A series universal strain gauges are perfect for transducer manufacturers. Combining the conventional constantan or Modco (modified Karma) measuring grid foils with high-performance PEEKF carrier material provides strain gauges that unite easy handling with high accuracy and outstanding humidity behavior. U series strain gauges also offer a compensated modulus of elasticity, increased sensitivity, and enhanced fatigue strength at high strains.

A series come in different geometries, resistance values, and grid lengths as standard. Custom designs can be developed in just a few weeks.

Robust

Excellent chemical resistance
Very low water absorption and resistance to humidity
Small radii of curvature are possible, allowing for installation in small drill holes

Easy handling during installation and long service life.

Precise

Very high stiffness (modulus of elasticity) and, thus, capable of transferring the measuring body’s deformation directly to the measuring grid
Higher thermal conductivity than polyimide

Suitable for transducers with high accuracy requirements.

Flexible

Over 30 different standard versions for steel or aluminum with 10 different creep adjustments
Various options available such as encapsulation, pre-coating with adhesive, or pre-tinned solder tabs
Custom designs possible

Perfect for your solution, regardless of whether it is standard or custom.

A Series (for OEM) - Datenblatt

Data Sheets

German

Key Attributes: Strain Gauges
Typ/Technologie	Foil strain gauge
Anwendung	Manufacturing transducers
Geometrie	T rosette
Messgitterlänge	3 mm
Messgitterlänge	0.118 in
Messgitterbreite	3 mm, 3.6 mm
Messgitterbreite	0.118 in, 0.142 in
Trägerlänge	7.5 mm
Trägerlänge	0.295 in
Trägerbreite	9.1 mm
Trägerbreite	0.358 in
Temperaturbereich	Standard (up to 200°C)
Nennwiderstand	1000 Ohms
k-Faktor (Material Messgitter)	Constantan (ca 2.0)
Temperaturgangsanpassung	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
Maximale Dehnbarkeit	Standard
Dauerschwingverhalten	Standard
Anschlusskonfiguration	Integrated solder tabs
Befestigungmethode	Bondable (adhesive pre-applied)
Messgitterschutz	Covered

Product Code	Beschreibung
1-EP310N	Heißhärtender 2-Komp.-Klebstoff EP310N
1-P250	1-Komp.klebstoff P250 (flüssig) - 2x15g
1-NG120	Nitrilgummi NG120
1-RMS1	Reinigungsset RMS1
K-KAB-ML	Messleitung Meterware