arrow_back_ios

Main Menu

See All Software See All Instrumente See All Aufnehmer See All Schwingungsprüfung See All Elektroakustisch See All Akustische End-of-Line-Testsysteme See All Events See All Akademie See All Anwendungen See All Industrien See All Kalibrierung See All Ingenieurdienstleistungen See All Unterstützen
arrow_back_ios

Main Menu

See All Durability See All Reliability See All Analyse Simulation See All DAQ See All API Treiber See All Dienstprogramm See All Vibrationskontrolle See All Kalibrierung See All DAQ See All Handheld See All Industriell See All Power Analyzer See All Signalaufbereiter See All Akustik See All Strom und Spannung See All Weg See All Kraft See All Wägezellen See All Mehrkomponenten See All Druck See All Dehnung See All Dehnungsmessstreifen See All Temperatur See All Neigen See All Drehmoment See All Vibration See All Zubehör See All Steuerungen See All Messerreger See All Modalerreger See All Leistungsverstärker See All Shaker Systeme See All Testlösungen See All Aktoren See All Verbrennungsmotoren See All Betriebsfestigkeit See All eDrive See All Sensoren für Produktionstests See All Getriebe See All Turbolader See All Schulungskurse See All Akustik See All Anlagen- und Prozessüberwachung See All Elektrische Energie See All NVH See All Kundenspezifische OEM-Sensoren See All Smarte Sensoren See All Schwingbelastung See All Strukturelle Integrität See All Automobil & Bodentransport See All Druckkalibrierung | Sensor | Messumformer See All Kalibrierung oder Reparatur anfordern See All Kalibrierung und Verifizierung See All Kalibrierung Plus Vertrag See All Brüel & Kjær Support
arrow_back_ios

Main Menu

See All Aqira See All nCode Viewer (DE) See All Weibull++ - NEW TEST (DE) See All Weibull++ - NEW TEST (DE) See All BlockSim - New Test (DE) See All BlockSim - New Test (DE) See All XFRACAS - New Test (DE) See All XFMEA - New Test (DE) See All XFMEA - New Test (DE) See All RCM++ - New Test (DE) See All RCM++ - New Test (DE) See All SEP - New Test (DE) See All SEP - New Test (DE) See All Lambda Predict - New Test (DE) See All Lambda Predict - New Test (DE) See All MPC - New Test (DE) See All nCode - Durability and Fatigue Analysis See All ReliaSoft - Reliability Analysis and Management See All API See All Elektroakustik See All Umgebungslärm See All Identifizierung der Lärmquelle See All Produkt-Lärm See All Schallleistung und Schalldruck See All Vorbeifahrgeräusche See All Produktionsprüfung und Qualitätssicherung See All Maschinenanalyse und -diagnose See All Strukturelle Gesundheitsüberwachung See All Strukturüberwachung See All Batterieprüfung See All Einführung in die Messung elektrischer Leistung bei transienten Vorgängen See All Transformator-Ersatzschaltbild | HBM See All OEM-Sensoren für die Landwirtschaft See All OEM-Sensoren für Robotik- und Drehmomentanwendungen See All OEM-Sensoren für die Agrarindustrie See All OEM-Sensoren für Robotik- und Drehmomentanwendungen See All Strukturelle Dynamik See All Prüfung der Materialeigenschaften See All Sicherstellung der strukturellen Integrität von Leichtbaustrukturen See All Elektrifizierung von Fahrzeugen See All Seiten, die nicht migriert wurden See All Software-Lizenzverwaltung

Zuverlässigkeitsorientierte Instandhaltung (RCM)

RCM standards

 

RCM++ provides predefined profiles that make it easy to configure the analysis workspace to fit the major RCM and FMEA reporting standards, such as:

  • SAE JA1011/1012 for RCM
  • MSG-3
  • NAVAIR 00-25-403

 

In addition, the software offers flexible capabilities to customize any of the sample profiles or create your own settings to meet the specific needs of your organization.

Reliability Centered Maintenance (RCM) analysis

 

Equipment selection


In order to focus resources where they can provide the greatest benefit, the Risk Discovery Analysis feature provides a choice of two configurable methods to determine which equipment will be analyzed with RCM techniques.

 

 

Functional failure analysis


The Analysis panel makes it easy to switch back and forth between three complementary views of the functional failure analysis information so you can choose the display that is best suited for your current activity.

  • The FMEA Hierarchy displays a lot of information in a compact space, where you can choose to display and enter causes before effects, if desired.
  • The Worksheet View allows you to type directly in the worksheet cells and tab through the analysis as you would in a spreadsheet application such as Microsoft Excel.
  • The Filtered View allows you to generate sortable lists of records of a type. For example, you may wish to see maintenance task records sorted by type, assigned interval, duration or cost.


Failure effect categorization and maintenance task selection


RCM++ supports the failure effect categorization (FEC) and maintenance task selection logic charts in the major industry RCM standards. You also have the option to customize the questions, categories and task types to fit your own specific analysis procedures.These configurable logic diagrams can help guide the analysis team to discuss the consequences of potential failure modes and consider the maintenance strategy that will be most applicable and effective.

 

 

Task packaging


It is easy to group individual tasks into packages based on factors such as time (scheduled interval), task type and areas in the system where tasks are performed. You can manually assign a task to the appropriate maintenance package or allow the software to automatically group tasks based on the criteria that you have specified for each package.

Maintenance strategies


Maintenance strategies based on cost and availability


Even when you choose to use the predefined decision logic diagrams employed by traditional RCM methods, those guidelines still require the analysis team to utilize their knowledge of the equipment's failure behavior when making decisions about the appropriate maintenance strategy. The built-in simulation and calculation engines help with these assessments.

 


Variety of statistical distributions to describe the failure behavior


RCM++ allows you to more accurately describe the probability of failure by providing a choice of ten distributions. Integration with Weibull++, and BlockSim software makes it possible to obtain the failure time distribution and parameters from an existing data analysis or RBD/fault tree. The software also provides the Quick Parameter Estimator (QPE) utility to help you estimate the distribution parameters based on limited information.

 

 

Maintenance strategies evaluation based on system availability at lowest cost


RCM++ makes it possible to simulate the operation of the equipment with different potential maintenance strategies in order to estimate the expected failures for each scenario and calculate the Average Availability, Cost per Uptime and Total Operating Cost.

Failure Modes and Reliability Analysis (FMRA)

 

Failure modes and reliability analysis (FMRA) feature helps you to integrate statistical reliability analysis calculations into your FMEA and RCM activities. It can be used to:

  • Display the FMEA records that could have an impact on system reliability/maintainability to define the relevant reliability characteristics.
  • Calculate the probabilities of failure required for a quantitative criticality analysis.
  • Use the occurrence ratings to generate a preliminary baseline reliability estimate.
  • Synchronize with BlockSim’s reliability block diagrams (RBDs) or fault trees.
  • Allocate the target reliability and target availability.

 

Optimum replacement interval

 

Automatically calculate the optimum replacement interval that will minimize corrective and preventive maintenance costs. You can calculate the optimum time for an individual item, or to calculate a time that will be optimum for a specified group of items.

Queries, reports, charts and diagrams

 

The software provides a complete range of options for presenting the data in ways that will effectively communicate results and facilitate decision-making:

  • Queries and print-ready reports to manage predefined and customized templates that can be made available to all database users, applied to any data set and incorporated into any print-ready report document.
  • The Query Utility window is a powerful analysis tool that makes it easy to find and open specific sections of the analysis. It is also a flexible custom reporting tool that allows you to create and manage saved queries.
  • The Reports window makes it easy to build report documents that include the predefined report forms, custom report forms and/or custom queries that will be most effective to present your analysis results. Since you can generate these documents directly in Microsoft Word or Excel, it is easy to customize and distribute reports without a specialized report editor or viewer.

If your organization chooses to implement SEP – web portal for ReliaSoft applications for an enterprise database, you can also publish these reports to the portal (in Word, Excel, PDF or MHTML format), where they can be accessed from any web-enabled device:

  • The Plot Viewer provides an array of flexible options to create attractive bar charts, pie charts and matrix charts based on the analysis data. The software also generates Cause and Effect Diagrams and Failure Relationship Diagrams to help you visualize the relationships between issues in your analyses.
  • FMEA/FMRA dashboards, where you can create customized dashboards to present data from FMEA and FMRA analyses in XFMEA/RCM++. In addition, if your organization chooses to implement a web-based portal for an enterprise database, you can now share selected dashboards to be accessed from any web-enabled device.

Data management tools and utilities

 

The software provides an array of tools to help you find and reuse descriptions from any existing analysis and to select phrases from predefined templates or phrase libraries. You also can use fully customizable Excel® templates to quickly import system configurations and/or analysis data from external data sources. You have an ability to import system configuration data from XFMEAMPC and XFRACAS as well.

FRACAS integration

 

You can automatically import system configuration data from an external Bill of Materials file or from XFRACAS (web-based FRACAS software). For an enterprise database, you can maintain a direct link to the XFRACAS system, which makes it easy to resynchronize at any time. This connection also enables the FMEA team to tap into valuable information about failure modes that are observed during testing and in the field, including incident quantities and new failure modes that may not have been considered yet.

Ready to take your reliability program further?