The MCS10 multi-axis sensor measures up to 6 different forces and moments simultaneously with an accuracy class of up to 0.1. It almost completely compensates for signal crosstalk – for exact measurement results.
MCS10
Up to six forces and moments on three axes (x, y, z) can be measured in combination with the MCS10 multi-axis sensor. This means that the MCS10 is ideally suited for mechanical engineering usage, in test benches, and also in research and development. It returns a three-dimensional image of the measurement set-up with a maximum precision up to accuracy class 0.1. Thanks to the MCS10's innovative construction with flange, it achieves the best measurements possible.
Individual signal channels of common multi-axis sensors often mutually affect each other. The MCS10 reduces this type of interference, known as crosstalk, to a minimum to ensure a problem-free signal. HBM also offers an individual compensation matrix for the MCS10, which can be used to further improve the precision. Combined with an HBM measuring amplifier this calculation can be done very comfortably.
Thanks to TEDS technology the installed data acquisition unit automatically detects the MCS10. This ensures that it is ready for immediate use without extensive parameterization. The decision which forces and moments should be measured can be taken independently. HBM has combined the experience from numerous custom-made special transducers in the MCS10, while adding a standard product's reliability and flexibility; for a multiaxis load cell with proven quality.
Exact measurement results thanks to high precision and compensation for crosstalk
Numerous measurement combinations possible with independently configurable maximum capacity ranges
Resistant - thanks to degree of protection and overload capacities
| MCS10 - データシート | Data Sheets | English |
| MCS10 - データシート | Data Sheets | Japanese |
| MCS10 - 設置マニュアル | Mounting Instructions | English, French, German |
Certificates and Approvals
| MCS10 - 適合宣言 | Declaration of Conformity | English |
| MCS10-005-3C - CAD | CAD Step Files |
| MCS10-005-6C - CAD | CAD Step Files |
| MCS10-010-3C - CAD | CAD Step Files |
| MCS10-010-6C - CAD | CAD Step Files |
| MCS10-025-3C - CAD | CAD Step Files |
| MCS10-025-6C - CAD | CAD Step Files |
| MCS10-050-3C - CAD | CAD Step Files |
| MCS10-050-6C - CAD | CAD Step Files |
| MCS10-100-3C - CAD | CAD Step Files |
| MCS10-100-6C - CAD | CAD Step Files |
| MCS10-200-3C - CAD | CAD Step Files |
| MCS10-200-6C - CAD | CAD Step Files |
| Nominal lateral force Fx & Fy | 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 40 kN |
| Nominal lateral force Fx & Fy | 224 lbf, 450 lbf, 1124 lbf, 2248 lbf, 4496 lbf, 8992 lbf |
| Nominal axial force Fz | 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 200 kN |
| Nominal axial force Fz | 1124 lbf, 2248 lbf, 5620 lbf, 11.24 klbf, 22.48 klbf, 44.96 klbf |
| Nominal bending moment Mx & My | 0.05 kNm, 0.15 kNm, 0.35 kNm, 0.7 kNm, 2 kNm, 3.5 kNm |
| Nominal bending moment Mx & My | 442 in-lb, 1327 in-lb, 3098 in-lb, 6195 in-lb, 17700 in-lb, 30973 in-lb |
| Nominal torsional moment Mz | 0.05 kNm, 0.15 kNm, 0.25 kNm, 0.5 kNm, 1.5 kNm, 3 kNm |
| Nominal torsional moment Mz | 442 in-lb, 1327 in-lb, 2212 in-lb, 4424 in-lb, 13274 in-lb, 26548 in-lb |
| Accuracy class | 0.2, 0.1, 0.15 |
| Degree of protection | IP67 |
| Length | 45 mm, 62 mm, 77 mm |
| Length | 1.77 in, 2.44 in, 3.03 in |
| Diameter | 68 mm, 96 mm, 121 mm |
| Diameter | 2.68 in, 3.78 in, 4.76 in |
| Minimum Temperature | -10 °C |
| Maximum Temperature | 85 °C |
| Minimum Temperature | 14 °F |
| Maximum Temperature | 185 °F |
| Output signal | Passive (mV/V) |
| Weight | 0.5 kg, 1 kg, 1.8 kg, 3.8 kg |
| Weight | 1.1 lb, 2.2 lb, 4 lb, 8.4 lb |
Sometimes, measurement tasks become bigger and bigger. The new MCS10-200 can help you to resolve this!
If the well-known ranges of MCS10 are not sufficient, the MCS10-200 could be: Fx/Fy can withstand 40 kN and Fz up to 200 kN. Looking at the moments we see 3.5 kNm for Mx/My and 3.0 kNm for Mz.
Interested? Take a look at the detailed datasheet for full specifications or contact us directly!
