Sorting and batching - ipc infographic - iso

DSE-HIE

Digitale Sensor Elektronik, hygienisch

Digital transducer electronics for many dosing applications,
Operation of load cells and complaints accused of strain gauges, Transducer impedance 200… 4500 Ohm, measuring range max. +/- 4 mV / V,
24 bit DC amplifier with digital measurement signal processing,
Sensor supply 5VDC, length sensor cable max. 3m,
Measuring rate 2000S / s, Measuring bandwidth 200Hz,
Output of scaled measurement values via fieldbus Interface PROFINET (RT
/ IRT) or EtherCAT, daisy chain topology,Integrated health monitoring,
Optimized, finely adjustable filters for dynamic weighing effects,
Configuration via integrated intuitive webserver,
Operating temperature 10 ° C ... + 50 ° C,
Supply voltage 15..30VDC, reverse polarity protected and short-circuit proof,
All connections in M12 connector technology,
Developed according to EHEDG and with protection class up to IP69k,
Subject to violations of calibration rights (OIML R76,Class III (in preparation)

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

The innovative Digital Sensor Electronics (DSE) is ideal for use in highly dynamic and automated weighing and industrial automation applications. The signals provided from analog strain gauge-based sensors such as load cells and force transducers are digitized and can be output in line with all common industrial Ethernet protocols (PROFINET RT/IRT and EtherCAT) via the integrated multi-protocol unit. The Ethernet interface and simple installation close to the sensor allow for time-efficient integration. The standardized CiA 461 command set further reduces the time required to get the system up and running. An intuitive web interface facilitates both the parameterization and the acquisition of measured values, making any additional software unnecessary.

The DSE is housed in a compact stainless-steel enclosure. Its hygienic EHEDG-compliant design allows its use in applications requiring the most stringent hygiene and cleanliness standards, such as in the food and beverages, pharmaceutical-, in industrial process- and factory automation. Owing to its IP67/68/69K degree of protection, the device is optimally protected and can be cleaned with high-pressure cleaners or employing CIP (clean-in-place) systems.

Hygienic

IP67, IP68, IP69K degree of protection (only with a connected plug)
EHEDG compliant
Certified by ECOLAB

For use in areas with rigorous hygiene requirements and in harsh industrial environments, especially in cold-aseptic applications

Communicative

Support of PROFINET, EtherCAT in Preparation
Parameterization and acquisition of measured values via integrated, intuitive web server using TCP/IP
Optimized for daisy-chain wiring due to internal switch

Time saving Plug & Work solution for modern industry environments

Precise

10,000e for maximum accuracy, 0.01%
2,000 measured values per second
Integrated filters for precise weighing and automation applications

Maximum output for retrofitting and new systems

DSE - Datenblatt	Data Sheets	German
DSE - Bedienungsanleitung	Manuell	English, German

DSE - CAD Download (Step Datei)

CAD Step Files

Key Attributes: Industrial Electronics
Anzahl der Eingänge	Single channel
Eingang	Strain gauge full/half bridge
Interface	ProfiNet, Ethernet/IP
Genauigkeitsklasse	0.01
Messrate	2000 S/s
Gehäuse	Field mounted
Interne Logik	None
Eichfähigkeit	Yes

Product Code	Beschreibung
1-CON-A2004	Schutzkappe Dose, M12 mit Band
1-CON-S1023	Anschlußbuchse M12, 4-polig, T kodiert
1-CON-S3003	Kabel-Kupplung M12, 8pol. A-kodiert
1-CON-S3004	Kabel-Kupplung M12, 8pol. gewinkelt
1-DSE-A01	DSE Montageset hygienisch
1-DSE-A02	DSE Montageset hygienisch inkl Schrauben
1-KAB189-0.3	Sensorkabel M12 beidseitig, 0.3m
1-KAB2144-0.3	Eth. Daisy Chain M12 beidseitig,0,3m
1-KAB2149-10	Ethernetkabel M12-RJ45, 10m
1-KAB2150-1	Powerkabel M12 - freie Enden, 1m
1-KAB284-2	Ethernetkabel, M12 auf RJ45, 2m