MX840-PAKEASY

QuantumX progiciel: MX840B + catmanEASY

Ensemble comprenant :
Amplificateur universel 8 voies de la famille QuantumX ;
Prise en charge des technologies de capteur suivantes :
- 8 x demi-ponts ou ponts complets de jauges (CC ou FP
de 4,8 kHz) ;
- 8 x capteurs piézo. alimentés en courant (IEPE) ;
- 8 x ponts complets piézorésistifs ;
- 8 x sondes de température résistives (PT100, PT1000) ;
- 8 x thermocouples (type K, N, R, S, T, B, E, J, C) ;
- 8 x résistances ;
- 8 x capteurs potentiométriques ;
- 8 x demi-ponts ou ponts complets inductifs, LVDT ;
- 8 x tension (100 mV, 10 et 60 V) ;
- 8 x courant (±20 mA) ;
- 4 x fréquence, compteur, codeur rotatif num.
(avec/sans index), SSI
- 1 x bus CAN (128 signaux en lecture, 7 voies pour
envoyer) ;
Pour chaque voie de mesure, on a :
- Vitesse d'échantillonnage : 40 kéch/s maxi.
(bande passante 7 kHz) ;
- Filtre passe-bas numérique réglable (Bessel,
Butterworth) ;
- Identification automatique du capteur (TEDS) ;
- Alimentation du capteur variable : 5...24 V, 0,7 W
(module : 2 W) ;
- Séparation galvanique ;
- Connecteur femelle : D-Sub-HD 15 pôles ;
Généralités :
- 1 x Ethernet (PTP), 2 x FireWire ;
- Tension d'alimentation : 10...30 V CC, 13 W maxi. ;
- Données d'étalonnage d'usine selon DIN/ISO 10012
enregistrées sur l'appareil (générer le certificat
via MX Assistent)
Le paquet de produits est réduit de 10 % et comprend également :
- Bloc d'alimentation secteur (1-NTX001) ;
- 8 connecteurs de capteur (1-SUBHD15-MALE) ;
- Câble croisé Ethernet (1-KAB239-2) ;
- Logiciel catman®Easy de HBM, avec maintenance
logicielle pour les 12 premiers mois ;
Accessoires disponibles à commander séparément :
- Raccordement de thermocouples : 1-THERMO-MXBOARD ;
- Raccordement de quarts de pont de jauges :
1-SCM-SG120/350 ;
- Raccordement de IEPE ou 10 V via BNC : 1-SUBHD15-BNC ;
- Raccordement de 300 V CAT II : 1-SCM-HV.

expand_more

chevron_left

chevron_right

QuantumX MX840B: 24-Bit Universal Measuring Amplifier for All Common Sensor Technologies

The MX840B modules are the universal measuring amplifiers of the QuantumX series. This means that sensors and transducers based on 17 different sensor technologies can be connected to each of the 8 channels available on these amplifiers (see complete survey below). Owing to the innovative “Plug & Measure” technology, the QuantumX module automatically identifies your transducer and is immediately ready to start measuring.

The universal measuring amplifiers of the QuantumX family thus substantially minimize the setup time in the test stand and are the ideal choice for frequently changing measuring tasks. As always with the QuantumX, the universal measuring amplifiers can be employed as stand-alone instruments or combined with other modules; this can be achieved in various topologies (centralized, distributed, hybrid) as well as by connecting them to a PC (e.g. with HBM catman software) or a data recorder (e.g. for mobile measurements). The resulting flexibility and scalability are definitely unique in the market.

The universal modules provide a 24-bit analog-to-digital converter, sample rates of 40 kS/s per channel, and active low-pass filters and are renowned for their high precision.

The combination of precision, flexibility, and measurement setup at lightning speed makes each QuantumX universal measuring amplifier an “all-purpose tool” for demanding and highly efficient data acquisition in measurement, which has already been used in tens of thousands of applications. Typical applications include test stands, service tasks, mobile data acquisition, and monitoring.

Accuracy class: up to 0.05%
Sample rate per channel: up to 40 kS/s

catman®Easy

catmanEasy is the basic version of the catman Data Acquisition Software which includes online and offline setup, online visualizations, and online maths as well as recording functionalities. catman Easy can be combined with two different add-on modules:

EasyMath: Mathematics module and auto sequences for catman Easy.
EasyScript: Free programming under VBA in measurement and analysis mode.

Time-saving and efficient

Connection of 17 different transducer technologies per channel
Plug & Measure: Automatic sensor identification and channel configuration
Fast calibration of transducers or validation through internal shunt connection
Custom configuration of individual channels
Wide ambient temperature range (-20 °C to +65 °C) and robust design allow use in any location
Distributed system and short, pre-wired sense leads

Minimized setup time in the test stand and an ideal fit for frequently changing measurement tasks, due to immediate sensor identification and universal connectors.

Precise and reliable

24-bit analog-to-digital converter per channel
Individual sample rates of up to 40 kS/s
Active low-pass filter
Accuracy classes ranging from 0.05 to 0.1 (depending on the sensor technology)
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Reliable results and proven high quality from HBM ensure successful tests at any time!

Compact, mobile, and scalable

The modules can be used as stand-alone instruments or combined with other measuring modules
Many measuring modules for special tasks are available (e.g. high-precision, torque, full bridges, etc.)
Different topologies (centralized, distributed, hybrid)
Real-time integration with the Ethernet fieldbus (CX27B), CAN (MX471B), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

From one to thousands of channels: Measuring equipment that is scalable to fit your requirements and integrates with your system.

MX840B - Caractéristiques techniques	Data Sheets	English
catman - Caractéristiques techniques	Data Sheets	English
MX840B - Caractéristiques techniques	Data Sheets	German
MX840B - Caractéristiques techniques	Data Sheets	Chinese
MX840B - Caractéristiques techniques	Data Sheets	Japanese
catman - Caractéristiques techniques	Data Sheets	French
catman - Caractéristiques techniques	Data Sheets	German
MX410 - Guide rapide	Quick Start Guide	English, Italian, French, Portuguese, Chinese, Korean, German, Spanish, Japanese
catman - Manuel d'utilisation	Manuel	English
QuantumX - Manuel d'utilisation	Manuel	English
catman - Manuel d'utilisation	Manuel	German
QuantumX - Manuel d'utilisation	Manuel	German
QuantumX - Manuel d'utilisation	Manuel	Japanese
QuantumX - Manuel d'utilisation	Manuel	Chinese

Sales documents

QuantumX - Brochure	Brochure	English
QuantumX - Brochure	Brochure	German
QuantumX - Brochure	Brochure	Portuguese
QuantumX - Brochure	Brochure	Chinese
QuantumX - Brochure	Brochure	Japanese

Certificates and Approvals

QuantumX - Déclaration de Conformité

Declaration of Conformity

English

MX840B - CAD (Fichier Step)

CAD Step Files

Key attributes: DAQ Systems
Nombre d’entrées	8
Entrée	Strain gauge full/half bridge, Electrical voltage, Standardized current (4-20mA), Inductive bridge, LVDT, SSI, IEPE / CCLD, Piezo resistive bridge, Thermocouples, RTD (Pt, Ni), Resistance (PTC, NTC, KTY), Digital encoder, Timer digital input, CAN
Signal de sortie	CAN bus
Interface	TCP/IP, Firewire
Classe de précision	0.01, 0.05, 0.1
Indice de protection	IP20
Fréquence d'échantillonnage	40000 Hz
Boîtier	Standalone
Capacités temps réel	None

Main Menu

Main Menu

Main Menu

Main Menu

Find Your Sensor

QuantumX progiciel: MX840B + catmanEASY

QuantumX MX840B: 24-Bit Universal Measuring Amplifier for All Common Sensor Technologies

catman®Easy

Time-saving and efficient

Precise and reliable

Compact, mobile, and scalable

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com

Nous avons déménagé ${referer} vers www.hbkworld.com