MX1615B

QuantumX amplificateur pour ponts (16)

Amplificateur 16 voies pour pont de la famille
QuantumX;
Prise en charge des technologies de capteur suivantes:
- Jauges câblées en quart de pont, demi-pont et
pont complet;
- Alimentation du pont : CC ou fréquence porteuse
(1200 Hz);
- Résistances de complément 120 et 350 ohms intégrées
pour les quarts de pont;
- Résistance de shunt activable en interne
(100 kilo-ohms);
- Tension électrique (10 V);
- Sonde de température résistive (Pt100, Pt500, Pt1000);
- Résistance;
- Potentiomètre;
Pour chaque voie de mesure, on a:
- Vitesse d’échantillonnage : 20 kéch/s maxi.;
- Filtre passe-bas réglable : Bessel, Butterworth;
- Prise en charge TEDS : identification automatique
du capteur;
- Connecteur femelle : push-in (8 broches / or) de
Phoenix;
Généralités:
- 1 x Ethernet;
- 2 x FireWire;
- Tension d'alimentation : 10...30 V CC, 12 W maxi.;
- Données d'étalonnage d'usine selon DIN/ISO 10012
enregistrées sur l'appareil (générer le certificat
via MX Assistent)
Remarques:
- 16 x connecteurs push-in (or) de Phoenix fournis;
- Accessoire : paquet de 16 connecteurs push-in
(1-CON-S1015).

expand_more

chevron_left

chevron_right

Strain gauge amplifier – QuantumX MX1615B / MX1616B

The strain gauge amplifiers, QuantumX MX1615B and QuantumX MX1616B, are suitable for precise and safe data acquisition of strain gauges in full-bridge, half-bridge and quarter-bridge configuration, as well as for strain gauge based transducers, potentiometers, resistance thermometers (PT100) or normalized voltage (+/- 10V). This means that this data acquisition unit is an ideal choice whenever strains, forces and displacements are acquired and also temperature influences play a role, too.

The MX1615B and MX1616B modules are equipped with 16 sensor inputs, arranged in a very compact housing. As a result, the MX1615B and MX1616B offer an unrivaled channel density in a small space. Typical application areas include static stress tests for FEM models, quasi-dynamic fatigue tests for life analysis, monitoring tasks, material investigations, residual stress analysis, maintenance tasks (e.g. for mechanical testing of PCB circuit boards), as well as for general recording of the load data in the field.

Like all QuantumX data acquisition modules, the MX1615B / MX1616B modules offer instant sensor detection via TEDS ("Plug & Measure"), and can be combined and scaled freely with all other QuantumX modules.

Precise

Patented circuitry (4-, 5-, 6-conductor technology, carrier frequency technology, as well as cyclic auto-adjustment on all channels)
Robust mechanism, which prevents electromagnetic and thermal interferences in the measurement result (e.g. due to inverter, high currents, electrical machines or temperature influences)
Individually configurable measuring rates up to 20 kS/s per channel and with high signal bandwidth.
Working standard calibration certificate according to ISO 10012 stored in the module
DAkkS certificate (ISO 17025) from HBM on request

Accurate, interference-free measurement results - for dynamic as well as static measurements. Thanks to the carrier-frequency method, you can count on clear results even when very high interferences occur and long cables are used.

Time-saving and efficient

Plug & Measure - the automatic channel configuration for each sensor
Instant calibration of sensors or plausibility check by internal shunt connection
Fast instrumentation using push-in plugs
Distributed concept and short, prefabricated sensor cables

Realize time and efficiency gains in measurement and analysis: through intelligently combined measurement chains and plug & measure technology. Mechanical voltages can be immediately visualized, stored or digitally forwarded.

Easy to integrate

Suitable for a wide range of ambient temperatures (-20 ° C ... + 65 ° C) with a robust design
Instant results with the help of the HBM catman software for data recording and data analysis
Real-time integration on the Ethernet fieldbus (CX27C), CAN (MX471C), or voltage output (MX878B)
Open software concept (Visual Studio .NET, LabVIEW, etc.)

A strain gauge amplifier that fits into your system landscape. That's how easy it is!

MX1615B - Caractéristiques techniques	Data Sheets	English
MX1615B - Caractéristiques techniques	Data Sheets	German
MX1615B - Caractéristiques techniques	Data Sheets	Chinese
MX1615B - Caractéristiques techniques	Data Sheets	Japanese
MX410 - Guide rapide	Quick Start Guide	English, Italian, French, Portuguese, Chinese, Korean, German, Spanish, Japanese
QuantumX - Manuel d'utilisation	Manuel	English
QuantumX - Manuel d'utilisation	Manuel	German
QuantumX - Manuel d'utilisation	Manuel	Japanese
QuantumX - Manuel d'utilisation	Manuel	Chinese

Sales documents

QuantumX - Brochure	Brochure	English
QuantumX - Brochure	Brochure	German
QuantumX - Brochure	Brochure	Portuguese
QuantumX - Brochure	Brochure	Chinese
QuantumX - Brochure	Brochure	Japanese

Certificates and Approvals

QuantumX - Déclaration de Conformité

Declaration of Conformity

English

MX1615B - CAD (Fichier Step)

CAD Step Files

Key attributes: DAQ Systems
Nombre d’entrées	16
Entrée	Strain gauge full/half bridge, Strain gauge quarter bridge, Standardized voltage (+/- 10V), Resistance (PTC, NTC, KTY), RTD (Pt, Ni)
Signal de sortie	None
Interface	TCP/IP, Firewire
Classe de précision	0.05, 0.1
Indice de protection	IP20
Fréquence d'échantillonnage	20000 Hz
Boîtier	Standalone
Capacités temps réel	None

Product Code	Description
1-TEDS-PAK	Paquet avec 5 unité TEDS, 1-wire-EEPROM
1-BPX001	QuantumX fond de panier montage mural
1-BPX002	QuantumX fond de panier montage en rack
1-BPX003	QuantumX fond de panier (5)
1-CASECLIP	QuantumX attaches mécaniques
1-CASEFIT	QuantumX tôle de montage
1-CON-S1015	Connecteur pour capteur (Push-in, 8pin)
1-KAB239-2	Câble Ethernet Cat6A, RJ45, 2m
1-KAB271-3	Câble de tens.d'aliment. (ODU-3m-vacant)
1-KAB272-2	FireWire (ODU-2m-ODU)
1-KAB272-5	FireWire (ODU-5m-ODU)
1-KAB272-W-0.2	FireWire (ODU 90°-0.2m-ODU 90°)
1-NTX001	Adaptateur réseau, 24V/CC
1-WIRING-MATE	Accessoire mont. connecteur MX1615/16/01