arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

VY (4ゲージ式)

VY Full Bridge Strain Gauges with 4 Measuring Grids for Measurements on Tension/Compression Bars and Torsion Bars and for Determining Shear Stresses

img

VY (4ゲージ式)

expand_more
chevron_left
chevron_right

VY: 4ゲージ式VYフルブリッジひずみゲージが引張/圧縮棒とねじり棒の上での計測を基に剪断応力を測定

Yフルブリッジひずみゲージ(SG)には4つの計測グリッドがあり、円周上に90°の間隔で均等に配置されています。フルブリッジSGの主な用途には、引張/圧縮棒とねじり棒上での計測とシアービームに起こる剪断応力の決定などがあります。

HBMの4ゲージ式フルブリッジひずみゲージには以下のようなタイプがあります:

· VY1  0°/90°T型フルブリッジ、鉄鋼か顧客仕様の温度応答への適合が可能(公称(定格)抵抗値120Ωで利用可能)

· VY4シアー/ねじりフルブリッジ、鉄鋼、アルミ、もしくは顧客仕様の温度応答への適合が可能(公称(定格)抵抗値120Ωと350Ωで利用可能)

VY1とVY4を使用した計測に関する詳細は小冊子「ホイストーンブリッジ回路の応用」と専門家向け文献「An Introduction to Measurements Using Strain Gauges(ひずみゲージによる計測の入門)」をご覧ください。

計測グリッドはコンスタンタンでできています; 計測グリッドを保持している材料はポリイミドです。

  • Strain gauges available in 120 and 350 Ohms
  • Measuring grid consists of constantan, measuring grid carrier is polymide
  • Fast delivery for preferred strain gauge types -  available from stock!

Simplified Documentation and Parameterization

To optimize the measuring point documentation each strain gauge includes two stickers which can be placed next to the measuring point and near the measuring amplifier. Benefit from the parameter information directly in the measurement setup:

  • QR code that directly links to the data sheet of the respective strain gauge
  • The product and production batch numbers
  • The k-factor and a additional space for your notes
  • QR code containing the values of the individual strain gauge to simplify computer-aided parameterization or documentation with a scanner
Y Series - データシート Data Sheets English
VY - Tech Notes English, German

Certificates and Approvals

Strain Gauges - 適合宣言 Declaration of Conformity English
VY (Full bridge)
Type/technology Foil strain gauge
Application Stress Analysis / structural testing
Geometry Full bridge circuit
Measuring grid length 15 mm, 6 mm, 3 mm
Measuring grid length 0.591 in, 0.236 in, 0.118 in
Measuring grid width 15 mm, 6 mm, 14 mm, 7 mm, 1.3 mm, 2.7 mm
Measuring grid width 0.591 in, 0.236 in, 0.551 in, 0.276 in, 0.051 in, 0.106 in
Carrier length 17 mm, 7.3 mm, 23 mm, 13.5 mm, 9.8 mm, 18 mm
Carrier length 0.669 in, 0.287 in, 0.906 in, 0.531 in, 0.386 in, 0.709 in
Carrier width 17 mm, 7.3 mm, 23 mm, 13.5 mm, 10 mm
Carrier width 0.669 in, 0.287 in, 0.906 in, 0.531 in, 0.394 in
Temperature range Standard (up to 200°C)
Nominal resistance 350 Ohms, 120 Ohms
Gauge factor (measuring grid material) Constantan (ca 2.0)
Temperature response Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F), Austenitic steel (16 ppm/K; 8.9 ppm/°F), Silica / composite (0,5 ppm/K; 0.3 ppm/°F), Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F), Plastic (65 ppm/K; 36.1 ppm/°F)
Maximum elongation Standard
Fatigue life Standard
Connection configuration Leads, Integrated solder tabs
Mounting Bondable
Grid protection Covered

Simplified Documentation and Parameterization

To optimize the measuring point documentation each strain gauge includes two stickers which can be placed next to the measuring point and near the measuring amplifier. Benefit from the parameter information directly in the measurement setup:

  • QR code that directly links to the data sheet of the respective strain gauge
  • The product and production batch numbers
  • The k-factor and a additional space for your notes
  • QR code containing the values of the individual strain gauge to simplify computer-aided parameterization or documentation with a scanner

Please note: newly produced strain gauges all come with the sticker in stock, strain gauges still in stock do not have this feature yet.

Related Products