arrow_back_ios

Main Menu

See All ソフトウェア See All 計測器 See All トランスデューサ See All 振動試験装置 See All 電気音響 See All 音響エンドオブライン試験システム See All リソースセンター See All アプリケーション See All 各産業 See All インサイト See All サービス See All サポート See All 当社の事業 See All 私たちの歴史 See All サステナビリティ(持続可能性) See All グローバルな事業展開
arrow_back_ios

Main Menu

See All 解析シミュレーション See All DAQ See All APIドライバ See All ユーティリティ See All 振動コントロール See All 校正 See All ハンドヘルド See All 産業用電子機器 See All パワーアナライザ See All シグナルコンディショナー See All DAQ Systems See All 音響トランスデューサ See All 電流電圧 See All 変位センサ See All 力センサ See All ロードセル See All マルチコンポーネント See All 圧力センサ See All ひずみ See All ひずみゲージ See All 温度センサ See All 傾斜センサ See All トルク See All 振動トランスデューサ See All アクセサリ See All コントローラ See All 測定加振器 See All モーダル加振器 See All パワーアンプ See All 加振器システム See All テストソリューション See All アクチュエータ See All 内燃機関 See All 耐久性 See All eDrive See All 生産テストセンサ See All トランスミッションギアボックス See All ターボチャージャ See All 音響 See All 設備とプロセスの監視 See All カスタムセンサ See All データの取得と分析 See All 耐久性および疲労 See All Electric Power Testing(電力テスト) See All NVH See All 信頼性 See All スマートセンサ See All 振動 See All 計量 See All 自動車および地上輸送 See All 校正 See All インストール、メンテナンス、修理 See All サポート :ブリュエル・ケアー製品 See All Release Notes See All コンプライアンス (Compliance) See All Our People
arrow_back_ios

Main Menu

See All nCode - 耐久性および疲労解析 See All ReliaSoft - 信頼性解析と管理 See All BK Connect See All API See All 電気音響 See All 音源探査(Noise source identification, NSI) See All 環境騒音 See All 音響パワーと音圧 See All 騒音認証 See All 産業用プロセスコントロール See All 構造ヘルスモニタリング See All 電気デバイス試験 See All 電気システム試験 See All グリッド試験 See All 高電圧試験 See All 導電加振機による振動試験 See All 構造力学 See All 機械分析と診断 See All プロセス計量 See All 車両の電動化 See All トランスデューサの校正サービス See All ハンドヘルド測定器の校正サービス See All 機器およびDAQの校正サービス See All 現地での校正 See All リソース See All ソフトウェアライセンス管理

Filter

close
  • SORT BY:

No more result to load

BE3200 Test Sequencer

The BE3200 test sequencer is designed for timing and sequence control of switchgear or ballistics tests. It replaces traditional electromechanical systems with microprocessor precision.

Up to 64 optically-isolated outputs are available, with extensive interlocking and safety features. Windows software provides control in milliseconds, cycles or degrees of phase via an optically-isolated serial port.

This high speed controller provides precise timing for the operation of devices used for testing in low/high voltage and high power laboratories. The timing pattern of the BE3200 can be synchronized to the mains generator, the external mains or derived from an internal timer. The outputs switch on and off in a programmed sequence and are fully synchronized. The synchronization signal tracks the input signal frequency. All outputs and inputs of the BE3200 are fiber optically isolated.

Protection

The sequencer is equipped with a number of protection measures to prevent damage to the equipment under test:

  • Mains Failure The system will continue to operate when the mains supply is interrupted.
  • Sync Failure When the synchronisation inputs are interrupted, the system switches to internal timebase, using the latest measured frequency.
  • Watchdog Timer If an internal failure occurs, "watchdog" circuit will clear the "sequencer on-line" status, which can be used to interrupt the main power.

Sequencer software

The sequencer Control program supplied with the test sequencer runs on a PC. The timing accuracy is better than 1 degree and the timing can be entered in milliseconds or in cycles and degrees. A downloaded sequence can run in a random-repetitive mode to be used for endurance testing.

The software allows complete integration with other high voltage data acquisition and analysis components of HBM Genesis HighSpeed.

Recommended for you

No more result to load