arrow_back_ios

Main Menu

See All ソフトウェア See All 計測器 See All トランスデューサ See All 振動試験装置 See All 電気音響 See All 音響エンドオブライン試験システム See All リソースセンター See All アプリケーション See All 各産業 See All インサイト See All サービス See All サポート See All 当社の事業 See All 私たちの歴史 See All サステナビリティ(持続可能性) See All グローバルな事業展開
arrow_back_ios

Main Menu

See All 解析シミュレーション See All DAQ See All APIドライバ See All ユーティリティ See All 振動コントロール See All 校正 See All ハンドヘルド See All 産業用電子機器 See All パワーアナライザ See All シグナルコンディショナー See All DAQ Systems See All 音響トランスデューサ See All 電流電圧 See All 変位センサ See All 力センサ See All ロードセル See All マルチコンポーネント See All 圧力センサ See All ひずみ See All ひずみゲージ See All 温度センサ See All 傾斜センサ See All トルク See All 振動トランスデューサ See All アクセサリ See All コントローラ See All 測定加振器 See All モーダル加振器 See All パワーアンプ See All 加振器システム See All テストソリューション See All アクチュエータ See All 内燃機関 See All 耐久性 See All eDrive See All 生産テストセンサ See All トランスミッションギアボックス See All ターボチャージャ See All 音響 See All 設備とプロセスの監視 See All カスタムセンサ See All データの取得と分析 See All 耐久性および疲労 See All Electric Power Testing(電力テスト) See All NVH See All 信頼性 See All スマートセンサ See All 振動 See All 計量 See All 自動車および地上輸送 See All 校正 See All インストール、メンテナンス、修理 See All サポート :ブリュエル・ケアー製品 See All Release Notes See All コンプライアンス (Compliance) See All Our People
arrow_back_ios

Main Menu

See All nCode - 耐久性および疲労解析 See All ReliaSoft - 信頼性解析と管理 See All BK Connect See All API See All 電気音響 See All 音源探査(Noise source identification, NSI) See All 環境騒音 See All 音響パワーと音圧 See All 騒音認証 See All 産業用プロセスコントロール See All 構造ヘルスモニタリング See All 電気デバイス試験 See All 電気システム試験 See All グリッド試験 See All 高電圧試験 See All 導電加振機による振動試験 See All 構造力学 See All 機械分析と診断 See All プロセス計量 See All 車両の電動化 See All トランスデューサの校正サービス See All ハンドヘルド測定器の校正サービス See All 機器およびDAQの校正サービス See All 現地での校正 See All リソース See All ソフトウェアライセンス管理

Filter

close
  • SORT BY:

Input Card For High-Accuracy Power Measurements in Electric Drives and Electrical Grids – GN310B, GN311B

The power analyzer card offers three power channels, each one consisting of one voltage input and one current (or voltage) input. The card also offers 2 digital channels for torque and speed measurements.
It is specially designed for efficiency measurements in inverter-driven electric drive systems and all tests in grid-connected systems or the grid itself with 5 voltage ranges of up to ± 1500 V DC and 7 current ranges of up to ± 2 A.

The power analyzer card also offers the best-in-class power accuracy of 0.015% of reading + 0.02% of range.

Highest Performance

  • Power accuracy 0.015%+0.02%
  • Torque/speed accuracy 0.005%
  • Built-in burden resistors
  • +/- 1500 V DC input
  • 1000 V CAT IV protection
  • Digital cycle detection for dynamic measurements

Highest Performance - best in class accuracy

Extensive Analysis

  • RMS, Fundamental, P, S, Q, cosPhi, Lambda, Losses, efficiencies, harmonics, space vector, dq0 transformation,…
  • Simultaneous fundamental and full bandwidth analysis
  • Multiple fundamental frequencies
  • Simultaneous dynamic and averaged torque and speed for torque ripple analysis

Extensive Analysis – even in dynamic load changes

….and more

  • User formulas for specific calculation
  • Real-time raw data storage in mainframe
  • 5 kV probe for marine/rail/aerospace applications
  • The card comes with extensive power calibration protocol

High-end features – for drive calibration and optimization

The power analyzer card will suit your requirements, high speed data like a scope and real time power measurements like a power analyzer:

  • GN310B: 18-bit resolution, 2 MS/s
  • GN311B: 18-bit resolution, 200 kS/s

Multiple cards can be combined in a mainframe to adapt the power analyzer to your specific needs, thus, the mainframe can also be equipped with other input cards to allow simultaneous measurements of further data like CAN bus, temperature or NVH.

The Genesis HighSpeed mainframes allow storage of all raw data at the full sample rate and in real time, without any memory limitations or delays in downloading. Stored data can be re-analyzed using the Perception ePower software suite or transferred to other software like MATLAB. All calculated results can be transferred to automation systems in real time using mainframe options like EtherCAT, CAN or a software API.

Related Content