CX22B-W

QuantumX Data Recorder (+WLAN)

Data recorder of the QuantumX family for stand-alone, mobile or stationary operation (with W-LAN);
For connection of:
- QuantumX modules, video camera(s), GPS or inertial
systems (IMU);
- Keyboard, (touch) screen, mouse, USB memory,
mobile/cellular router (LTE, UMTS);

Software:
- catman EASY preinstalled;
- Configuration of the measurement channels: Sensor, database, TEDS, DBC, Excel;
- Data recording: Trigger, Start/Stop condition,
interval recording;
- Other functions: Signal computation (algebra,
SG rosettes, arithmetics, logics, statistics,
integral, differential, additional filters),
frequency analysis (FFT, frequency alarm), counting
(time-at-level, Rainflow), alarms (email/SMS),
digital output, log, camera activation);

Configuration and interfaces:
- Internal data storage (eSSD): 240 GB;
- Removable storage (CFast): 8 GB included;
- 3 x Ethernet (2 x Gigabit RJ45, 1 x WLAN + antenna);
- 2 x FireWire (ODU);
- 1 x multipoint connector for integrating BPX backplane;
- 1 x USB 3.0 and 2 x USB 2.0;
- 1 x monitor port (DVI-D);
- 3 x digital inputs (+ push button);
- 3 x digital outputs, status LEDs;
- 1 x RS232;

General:
- Voltage supply: 10...30 V DC, max. 12 W;
- No rotating parts;

Notes:
- 12-month software maintenance included;
- Softtware Upgrade: 1-CATEASY-TO-AP;
- Cloud integration on request.

QuantumX Data Recorder (+WLAN)

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

QuantumX CX22B-W: Stand-Alone Data Recorder With up to 5 MS/s Total Sample Rate

The QuantumX CX22B-W is an extremely reliable, stand-alone data recorder that collects, analyzes, and stores mechanical, electrical, or thermal measurement quantities as well as the signals from the vehicle bus, cameras, wheel force sensors, or GPS directly in the device. Due to its huge computing power (total sample rates of up to 5 MS/s), the CX22B-W data recorder allows the reliable acquisition, computation, automation, visualization, and recording of measured signals.

These features make the QuantumX CX22B-W ideally suited to be used in mobile data acquisition for road load data acquisition or ride and handling tests as well as for unmonitored long-term measurements (e.g. on bridges and other structures) with virtually any number of channels.

The CX22B-W, as a data recorder of the modular and universal QuantumX measuring amplifier series, too, can be employed in any topology (centralized, distributed) and offers maximum flexibility in regards to the measurement setup.

Reliable data recording

A data recorder for the signals of all QuantumX and SomatXR modules as well as GPS (USB, RS232), CANbus (via MX840B, MX471B), wheel force sensors, video, etc.
Total sample rate of up to 5 MS/s, 240 GB SSD
Stable, even in the event of sudden interruptions (no more than last data block lost)

Absolute reliability when it comes to storing your measured data.

Powerful computational functions

Powerful online computation of signals – already in the data recorder module
Typical functions such as scientific calculator, matrix calculation, counting (Rainflow, time-at-level, etc.), frequency analysis (FFT and trigger), calculation of electric power and efficiency
Test automation options

Draw the right conclusions, in the field, owing to the extensive computation and analysis functions in the device.

Flexible use

The module can be accessed in different ways: by a directly connected touchscreen, a tablet, LAN, WLAN, or encrypted remote access over the mobile network
Modular and scalable to up to 1,000 channels
Distributed or centralized use in combination with other QuantumX or SomatXR modules, in a wide range of topologies

Easy to use and fast integration with your test setup.

QuantumX CX22B-W/CX22B - Data Sheet	Data Sheets	English
CX22 - Data Sheets	Data Sheets	Chinese
CX22 - Data Sheets	Data Sheets	German

Sales documents

QuantumX - EU Declaration of Conformity	Declaration of Conformity	English
QuantumX - Brochure	Brochure	Japanese

Certificates and Approvals

CX22B(-R)-W - EU Declaration of Conformity	Declaration of Conformity	English
QuantumX - EU Declaration of Conformity	Declaration of Conformity	English

CX22B-W - CAD

CAD Step Files

Product Code	Description
1-BPX001	QuantumX backplane wall mounting
1-BPX002	QuantumX backplane rack mounting
1-BPX003	QuantumX backplane (5)
1-CASECLIP	QuantumX mounting set
1-CASEFIT	QuantumX mounting plate
1-GPS-USB-18HZ	GPS receiver (USB-5m)
1-KAB239-2	Cable Ethernet Cat6A, RJ45, 2 m
1-KAB271-3	DC power supply cable (ODU-3m-open)
1-KAB272-2	FireWire (ODU-2m-ODU)
1-KAB272-5	FireWire (ODU-5m-ODU)
1-KAB272-W-0.2	FireWire (ODU 90°-0.2m-ODU 90°)
1-NTX001	Adapter power supply, 24 V/DC