Módulo CAN-FD QuantumX (4)

Quantumx MX471C - Can FD Under Control for Mobile and Bench Testing

The QuantumX CAN FD bus module MX471C module allows you a simultaneous integration of up to four CAN or CAN FD networks into the QuantumX data acquisition system and can be expanded to as many modules as needed.

This module is able to receive any signal from CAN FD, CAN, CCP, xCP-on-CAN/FD, J1939, ISOBUS or CANopen and combined with analog measurement input modules, plus the Data Recorder is ideally suited as CAN FD recorder for your mobile vehicle test or fleet monitoring task. For this all signals can be acquired as raw signal stream and decoded in PC or recorder software. All the acquired signals can also be decoded in real-time and transferred to analog voltage output (MX878B) or for instance to an Ethernet based fieldbus (CX27C) for bench integration.

The module’s powerful CAN gateway mode allows you up to transmit up to 200 analog inputs signals to your automation system and thus an easy way integrating new equipment in your existing bench test or in any mobile recorder or test equipment. For this all signals can be encoded in real-time which allows lowest latencies < 1 ms.

MX471C also operates as Ethernet gateway. So any signal from directly connected MX modules can be transferred to Ethernet and to a PC or recorder.

Additionally, messages can be split up, as required, and reassembled, for instance, to setting up a CAN-2-CAN gateway is possible.