The best connection between A and B is a cable from HBK. Quality cables provide so much more than an electrical connection between two points. Our cables are carefully selected and designed in order to offer excellent electrical properties; high screening and low capacitance combined with maximum strenght.
HBK Microphone Tripods allow for increased measurement flexibility through adjustable pan, tilt head and height settings. In addition our tripods can be supplied with CAM head, allowing both photocells and microphones to be placed with minimal effort.
Microphone Rotating Boom Stand designed for use in sound power measurements to ISO 3741 and in building acoustics, and complements the range of acoustic measurement equipment available from HBK.
Microphone adaptors for mounting preamplifiers and extension rods with microphones of different diameters. Our range of microphone adaptors also include angle pieces, flexible adaptors for 1/4" to 1/2" microphones, and flush mounting adaptors for both 1/4" inch and 1/2" inch microphones.
Electrostatic actuators are designed to simulate the pressure response of condenser microphones. Oscillating electrostatic force is exerted in front of the microphone diaphragm, providing the consequent response of the microphone. By applying an oscillating electrostatic force - sweeping over a frequency range from 100 Hz to 200 kHz - the pressure response can be tested.
Microphone Windscreen (also known as microphone windshields, acoustic windshields and mic socks) designed with specially prepared, open-pored, polyurethane foam capable of attenuating wind noise 10 to 12 dB, depending on wind speed. The windscreens effectively reduces excessive pressure on a microphone facing winds, providing the ideal measurement conditions for environmental noise logging, and all other outdoor microphone measurement tasks.
Nose cones replace the normal protection grid of the microphone, giving the least possible resistance to air flow - and thereby reducing the noice produced by the presence of the microphone itself. The fine wire mesh around the nose cone permits sound pressure transmission to the microphone diaphragm while a truncated cone behind the mesh reduce the air volume in front of the diaphragm.
HBK Microphone Holders are designed for mounting a 1/2-inch or 1/4-inch microphone or preamplifier with a tripod or an extension rod. The holders offer stable positioning and flexible locking at any angle between + 90° and –90° from the vertical position.
Miscellaneous Microphone Accessories provides a mix of assorted adaptors and mounting accessories for our measurement microphones
Our outdoor microphone protection kits, such as rain covers, dehumidifiers, and mounting extensions for microphone windscreens, provide essential outdoor protection accessories for your microphone when performing outdoor measurements.
Microphone Accessories
In outdoor measurements where wind, rain, and turbulence can influence measurement results, the right accessories help mitigate the environment.
