C10

The C10 compressive force transducer offers outstanding precision and robustness and has multiple uses focusing on applications in test benches, material testing machines, and challenging tasks in production. High output signal.

NEW: Now available with integrated digital amplifier with IO-Link output. Configure your C10 here.

C10

expand_more

chevron_left

chevron_right

C10 Compressive Force Sensor: Capacities from 2.5 kN to 1 MN

C10 sensors are radially symmetrical force transducers for compressive forces. The output signal is higher than that of other load cells (up to more than 4 mV/V), thus enhancing the resolution and the noise/signal ratio of your measurement chain. The C10 series is a benchmark in accuracy, made from rust-free materials, and various configuration options are available for current market prices.

HBK accuracy class: 0.02 ... 0.05
Capacities: 2.5 kN ... 1 MN
Output signal: mV/V (passive, Wheatstone bridge) and IO-Link

New: With the new option "VAIO", the C10 comes along with an integrated digital amplifier. Your advantages:

Greater precision: Linearity error 0.005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TC₀: 0.006 %/ 10 K.
Improved reliability: The Sensor Health monitoring of the C10 sends warnings in case of exceeding temperature or mechanical limits before problems occur.
More information: Temperature measurement, statistical information.
Lower costs, easy setup: The C10 with the VAIO option comes along as adjusted sensor. When connected to an IO-Link master, you will get immediately precise readings in Newton. Low cabling costs.
Standard instrument features: Limit switches, peak detection, digital output, filter.
Fast: Internal sampling rate: 40 kHz, 0.9 ms cycling time to the IO-Link master.

Please have a look at the K-C10 model. Beside many other options, you can find order information for the IO-Link version as well.

Advantages of all C10:

Improved precision:

TC₀ of only 75 ppm/ 10 K, with digital output just 60 ppm/ 10 K.
Minimal non-linearity, small hysteresis and excellent repeatability (0.025 %).
High output signal of greater than 4 mV/V (from 25 kN capacity). Also available: Integrated amplifier.

Economical: Wider measurement range means the same accuracy with fewer sensors - and fewer rejects in production. Even improved with IO-LINK option.

Adaptable usage

Made of rust-free material.
IP68 degree of protection (with cable option).
Not affected by lateral force and eccentric load application.
Vibration resistant.
EMC approved.

Reliable under harsh environmental conditions, even with electromagnetic fields.

Flexible configuration

Flexible configuration options.
Over 10,000 combinations available at short delivery times.
Different connector and cable options, TEDS, double-bridge versions available, etc.
Accessories available separately: thrust pieces, connection cables, calibration services.
Available with integrated digital amplifier.

Sensors can be matched to the measurement task. Plug-and-play solutions save time and reduce likelihood of installation errors. With integrated IO-Link option even more economical and precise.

Filter

Diameter (without cable or plug) keyboard_arrow_down
Diameter (without cable or plug) keyboard_arrow_down
Height (without accessories) keyboard_arrow_down
Height (without accessories) keyboard_arrow_down
Maximum capacity (nominal load) keyboard_arrow_down
Maximum capacity (nominal load) keyboard_arrow_down
HBK Accuracy class keyboard_arrow_down

Code	Maximum capacity (nominal load)	Maximum capacity (nominal load)	HBK Accuracy class	Height (without accessories)	Height (without accessories)	Diameter (without cable or plug)	Diameter (without cable or plug)
1-C10/1MN	1 MN	225 klbf	0.05	84.7 mm	3.33 in	279 mm	10.98423 in
1-C10/2.5KN	2.5 kN	562 lbf	0.02	35.7 mm	1.41 in	104.8 mm	4.125976 in
1-C10/5KN	5 kN	1.124 klbf	0.02	35.7 mm	1.41 in	104.8 mm	4.125976 in
1-C10/10KN	10 kN	2.25 klbf	0.02	35.7 mm	1.41 in	104.8 mm	4.125976 in
1-C10/25KN	25 kN	5.62 klbf	0.03	35.7 mm	1.41 in	104.8 mm	4.125976 in
1-C10/50KN	50 kN	11.24 klbf	0.04	35.7 mm	1.41 in	104.8 mm	4.125976 in
1-C10/100KN	100 kN	22.5 klbf	0.04	47.5 mm	1.87 in	153.9 mm	6.059043 in
1-C10/250KN	250 kN	56.2 klbf	0.04	47.5 mm	1.87 in	153.9 mm	6.059043 in
1-C10/500KN	500 kN	112 klbf	0.04	65.2 mm	2.57 in	203.2 mm	7.999984 in
K-C10	2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN	562 lbf, 1.124 lbf, 2.2481 lbf, 5.62 lbf, 11.24 lbf, 22.481 lbf, 56.202 lbf, 112.404 lbf, 224.809 lbf	0.02, 0.03, 0.04, 0.05	35.7 in, 47.5 in, 65.2 in, 84.7 in	1.41 in, 1.87 in, 2.57 in, 3.33 in	104.8 mm, 153.9 mm, 203.2 mm, 279 mm	6.059043 in, 4.125976 in, 10.98423 in, 7.999984 in

C10 - Data Sheet	Data Sheets	English
C10 - Quick Start Guide	Quick Start Guide	English, Italian, French, Chinese, German
C10 - Mounting Instructions	Mounting Instructions	English, Italian, French, German
Release Notes - IO-Link Force Sensors	Release Note	English

Sales documents

Reliable force measurement - Brochure

Brochure

English

Certificates and Approvals

U10M, U10S, U10F,U15, C10, C15 - EU Declaration of Conformity

Declaration of Conformity

English

C10 capacity 2.5 kN Flange - CAD	CAD Step Files
C10 capacity 5 kN Flange - CAD	CAD Step Files
C10 capacity 10 kN Flange - CAD	CAD Step Files
C10 capacity 25 kN Flange - CAD	CAD Step Files
C10 capacity 50 kN Flange - CAD	CAD Step Files
C10 capacity 100 kN Flange - CAD	CAD Step Files
C10 capacity 250 kN Flange - CAD	CAD Step Files
C10 capacity 500 kN Flange - CAD	CAD Step Files
C10 capacity 1 MN Flange - CAD	CAD Step Files
C10 Capacity 2.5 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 5 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 10 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 25 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 50 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 100 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 250 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 500 kN Flange with integrated amplifier - CAD	CAD Step Files
C10 Capacity 1 MN Flange with integrated amplifier - CAD	CAD Step Files
C10 capacity 2.5 kN with load base - CAD	CAD Step Files
C10 capacity 5 kN with load base - CAD	CAD Step Files
C10 capacity 10 kN with load base - CAD	CAD Step Files
C10 capacity 25 kN with load base - CAD	CAD Step Files
C10 capacity 50 kN with load base - CAD	CAD Step Files
C10 capacity 100 kN with load base - CAD	CAD Step Files
C10 capacity 250 kN with load base - CAD	CAD Step Files
C10 capacity 500 kN with load base - CAD	CAD Step Files
C10 capacity 1 MN with load base - CAD	CAD Step Files
C10 Capacity 2.5 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 5 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 10 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 25 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 50 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 100 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 250 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 500 kN with load base and integrated amplifier - CAD	CAD Step Files
C10 Capacity 1 MN with load base and integrated amplifier - CAD	CAD Step Files
IO3 - firmware v2.0.8	Firmware
IO4 - firmware v2.0.10	Firmware

C10
Maximum capacity (nominal load)	2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN
Maximum capacity (nominal load)	562 lbf, 1.124 lbf, 2.2481 lbf, 5.62 lbf, 11.24 lbf, 22.481 lbf, 56.202 lbf, 112.404 lbf, 224.809 lbf, 1.124 klbf, 2.25 klbf, 5.62 klbf, 11.24 klbf, 22.5 klbf, 56.2 klbf, 112 klbf, 225 klbf
Direction	Compression
Type / technology	Strain Gauge
Calibration	Calibrated
Output signal	mV/V (passive strain gauge), IO-Link
HBK Accuracy class	0.02, 0.03, 0.04, 0.05
Degree of protection	IP67
Mechanical adaptation	Spherical load introduction
Height (without accessories)	35.7 in, 47.5 in, 65.2 in, 84.7 in, 35.7 mm, 47.5 mm, 65.2 mm, 84.7 mm
Height (without accessories)	1.41 in, 1.87 in, 2.57 in, 3.33 in
Diameter (without cable or plug)	104.8 mm, 153.9 mm, 203.2 mm, 279 mm
Diameter (without cable or plug)	6.059043 in, 4.125976 in, 10.98423 in, 7.999984 in

List of accessories available for all variants of this family

Product Code	Description
1-EEK4	Ground cable, copper, length 400mm
1-EDO3/100KN	Thrust piece to ISO 376 for C10/C15
1-EDO3/1MN	Thrust Piece acc. to ISO 376 for C10/C15
1-EDO3/500KN	Thrust Piece to ISO 376 for C10/C15
1-EDO3/50KN	Thrust Piece to ISO 376 for C10/C15
1-CON/BS1	Connector, bayonet for 4 mm-6.5 mm cable
1-CON/BS2	Connector, bayonet for 6.5 mm or larger
1-EEK6	Ground cable, copper, length 600mm
1-EEK8	Ground cable, copper, length 800mm
1-KAB157-3	Connection cable, bayonet - free ends
1-KAB158-3	Connection cable, thread - free ends
K-CAB-F	Cable, configurable f. force transducers