arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

S9M

The S9M S-type force transducers can be used for measuring tensile/compressive forces up to 50 kN. Robust (degree of protection: IP68) and extremely precise.

img

S9M

expand_more
chevron_left
chevron_right

S-Type S9M Load Cell: Measurements From 500 N To 50 kN

The S-shaped S9M load cell measures tensile and compressive forces and can be used for a wide variety of static and dynamic measurement applications. Thanks to its high accuracy the S9M is suitable for use in test benches and torque measurements with a lever  as well as for production and monitoring tasks.

The S9M is also the right choice for difficult applications: All measuring bodies, even the one for a nominal (rated) force of 500 N, are made of stainless steel. In addition, as the S9M has a welded and therefore hermetically sealed SG installation, the force sensor load cell is rated with degree of protection IP68.

  • HBK accuracy class: 0.02
  • Nominal (rated) forces: 500 N to 50 kN

Precise

  • HBK accuracy class 0.02
  • Very low temperature-dependence of the zero point
  • Parasitic torques and forces have only a very small effect on the measurement result

High precision allows for reliable measurements in the lower measurement range of the sensor: Benefit from the extremely wide measuring range with the best price-to-performance ratio.

Withstands a lot

  • Stainless steel spring element
  • Hermetically welded force transducer

Non-rusting materials ensure long durability. Excellent stability, even under unfavorable conditions.

Immediately ready to use

  • Various practical cable lengths available for S9M: Choose the right one for your application
  • Connector assembly for HBK industrial amplifiers optionally available
  • TEDS (electronic data sheet for automatic sensor detection) available on request

Time-saving plug and play solutions: Inconvenient on-site soldering and connector assembly are eliminated.

Filter

close
S9M - Data Sheet Data Sheets English
S9M - Mounting Instructions Mounting Instructions English, Italian, French, German

Sales documents

Reliable force measurement - Brochure Brochure English

Certificates and Approvals

S9M - EU Declaration of Conformity Declaration of Conformity English
S9M capacity 500 N - CAD CAD Step Files
S9M capacity 1 kN - CAD CAD Step Files
S9M capacity 2 kN - CAD CAD Step Files
S9M capacity 5 kN - CAD CAD Step Files
S9M capacity 10 kN - CAD CAD Step Files
S9M capacity 20 kN - CAD CAD Step Files
S9M capacity 50 kN - CAD CAD Step Files
S9M
Maximum capacity (nominal load) 1 kN, 500 N, 50 kN, 10 kN, 20 kN, 2 kN, 0.5 kN, 5 kN
Maximum capacity (nominal load) 225 lbf, 112 lbf, 11.2 klbf, 2.25 klbf, 4.5 klbf, 450 lbf, 1.12 klbf
Direction Both directions
Type / technology Strain Gauge
Calibration Calibrated
Output signal mV/V (passive strain gauge)
HBK Accuracy class 0.02
Degree of protection IP68
Mechanical adaptation Central thread
Height (without accessories) 62 mm, 100 mm, 87.3 mm
Height (without accessories) 2.44 in, 3.94 in, 3.44 in
Diameter (without cable or plug) 50.8 mm, 76.2 mm, 57.2 mm, 69.8 mm
Diameter (without cable or plug) 1.999996 in, 2.999994 in, 2.251964 in, 2.748026 in