S2M

Precise, S-shaped S2M force transducer for small forces up to 1 kN. Cost-effective, configurable and with an overload stop.

S2M

expand_more

chevron_left

chevron_right

S-Shaped S2M Load Cell: Measurements From 10 N to 1 kN

The S-shaped S2M force transducer measures tensile and compressive forces and can be used for a wide variety of static and dynamic measurement applications.

The consistently high output signal of 2 mV/V guarantees a good signal-to-noise ratio. It measures very precisely even with small forces (the lowest nominal (rated) measuring range is 10 N) and returns extremely reliable results. Thanks to integrated overload protection, the S2M itself is protected against extremely strong overload in the case of machine damage.

HBK accuracy class: 0.02
Nominal (rated) forces: 10 N to 1 kN

Precise

Low dependence of the zero point on the temperature (200ppm/10K)
Minimum non-linearity, relative reversibility error and lateral force effect of 0.02 % each
High output signal of 2 mV/V, even with nominal (rated) forces as low as 10 N
Optimum signal-to-noise ratio

High precision, even with low nominal (rated) forces, offers an extremely wide measuring range and reliable results with the best price-to-performance ratio.

Withstands rough conditions

Overload stop with a force limit of 1000 % the nominal (rated) force
Drag-chain-compatible PU cable with low force shunt, resistant to many oils and chemicals

Flexible, rugged and protected against overloads – for maximum safety

Immediately ready for use

Many common cable lengths available
Ready-assembled connectors for HBK measuring amplifiers available
Many configurations available on stock: If needed, with TEDS electronic data sheet for immediate setup in your data acquisition system, knuckle eyes and calibration services

Time-saving plug and play solutions: Inconvenient on-site soldering and connector assembly are eliminated

Filter

Maximum capacity (nominal load) keyboard_arrow_down

Code	Maximum capacity (nominal load)	Maximum capacity (nominal load)
1-S2M/10N-1	10 N	2.25 lbf
1-S2M/20N-1	20 N	4.5 lbf
1-S2M/50N-1	50 N	11.2 lbf
1-S2M/100N-1	100 N	22.5 lbf
1-S2M/200N-1	200 N	45 lbf
1-S2M/500N-1	500 N	112 lbf
1-S2M/1000N-1	1 kN	225 lbf
K-S2M-MONT	10 N, 20 N, 50 N, 100 N, 200 N, 500 N, 1 kN	2.25 lbf, 4.5 lbf, 11.2 lbf, 22.5 lbf, 44.5 lbf, 112 lbf, 225 lbf

S2M - Data Sheet	Data Sheets	English
S2M - Mounting Instructions	Mounting Instructions	English, French, German

Sales documents

Reliable force measurement - Brochure

Brochure

English

Certificates and Approvals

S2M - EU Declaration of Conformity

Declaration of Conformity

English

S2M capacity 10 N - CAD	CAD Step Files
S2M capacity 20 N - CAD	CAD Step Files
S2M capacity 50 N - CAD	CAD Step Files
S2M capacity 100 N - CAD	CAD Step Files
S2M capacity 200 N - CAD	CAD Step Files
S2M capacity 500 N - CAD	CAD Step Files
S2M capacity 1000 N - CAD	CAD Step Files

S2M
Maximum capacity (nominal load)	1 kN, 500 N, 20 N, 100 N, 10 N, 50 N, 200 N
Maximum capacity (nominal load)	225 lbf, 112 lbf, 4.5 lbf, 22.5 lbf, 2.25 lbf, 11.2 lbf, 45 lbf, 44.5 lbf
Direction	Both directions
Type / technology	Strain Gauge
Calibration	Calibrated
Output signal	mV/V (passive strain gauge)
HBK Accuracy class	0.02
Degree of protection	IP67
Mechanical adaptation	Central thread
Height (without accessories)	60 mm
Height (without accessories)	2.36 in
Diameter (without cable or plug)	80 mm
Diameter (without cable or plug)	3.1496 in

List of accessories available for all variants of this family

Product Code	Description
1-U1R/200KG/ZGW	Knuckle eye for RSC, S2, S9M, Z30
1-EDO3/1KN	Thrust Piece to ISO 376 for Z30A/1kN
1-U1R/200KG/ZL	Load button for Z30, Z6

Modern Slavery Statement Imprint Cookie Policy Privacy Policy Sitemap Ethical Business Company Profile