arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

PACEline CSW

PACEline force washers for measuring shear forces such as process forces in machining processes. Compact: 3 to 5 mm in height.

img

PACEline CSW

expand_more
chevron_left
chevron_right

PACEline CSW Piezoelectric Miniature Load Washers for Measuring Shear Forces: Capacities Ranging from 1 kN to 8 kN

Piezoelectric load washers of the PACEline CSW series reliably measure shear forces in the cable direction (when mounted and adjusted). With their low height of construction, between 3 and 5 mm, CSW load washers impressively save space, having the same dimensions as type PACEline CLP load washers (for measuring normal forces).

By combining CLP load washers with different mounting directions of at least two CSW load washers, very small measurement systems can be set up to measure forces in different directions simultaneously.

Featuring permanently connected cables, load washers of the PACEline CSW series are made of rustproof materials and provide equipment protection level IP65. 

  • Capacities: 1 kN to 8 kN
  • HBM accuracy class: 1

Small and reliable

  • Height of construction: 3.5 mm (with 1kN capacity) to 5 mm (with 8 kN capacity)
  • Outside diameter: Between 16 mm and 36 mm (depending on the capacity)
  • Integrated cable for high equipment protection level IP65
  • Piezo-typical: Low sensitivity to EMC effects

Reliable force measurements, even in tight spaces and/or with unfavorable ambient conditions (EMC, moisture).

Fast and with a large measuring range

  • Piezo-typical: Large measuring range
  • Low crosstalk
  • High fundamental frequency
  • Low drift

Perform different measurement tasks with one sensor owing to the large measuring range. Multiaxial measurement systems can be constructed even with minimum space requirements (in combination with CLP).

Well engineered accessories

  • Charge amplifier proven in the industry – - also available with higher equipment protection level IP65
  • Summing boxes and amplifiers electrically isolated from the object upon which they are mounted
  • Large selection of low-noise cables and extension adapters.

Owing to the perfection of the accessories, your measurement system can be installed quickly. No additional insulating washer is required for the installation (due to electrical isolation).

Filter

close
PACEline CSW – Data sheet Data Sheets English
CSW - Mounting Instructions Mounting Instructions English, Italian, French, Chinese, German

Certificates and Approvals

CFT/CFT+/CFW/CLP/CSW/CST/CHW - EU Declaration of Conformity Declaration of Conformity English
PACEline CSW
Maximum capacity (nominal load) 2 kN, 4.5 kN, 8 kN, 3 kN, 1 kN
Maximum capacity (nominal load) 450 lbf, 11 klbf, 1.8 klbf, 674 lbf, 225 lbf
Direction Compression
Type / technology Piezoelectric
Calibration Not calibrated
Output signal pC (passive piezoelectric)
HBK Accuracy class 1
Load cell design Miniature sensor
Degree of protection IP65, forceind_capgrp_2
Mechanical adaptation Force washer
Height (without accessories) 3.5 mm, 4 mm, 5 mm
Height (without accessories) 0.138 in, 0.157 in, 0.197 in
Diameter (without cable or plug) 20 mm, 30 mm, 36 mm, 24 mm, 16 mm
Diameter (without cable or plug) 0.7874 in, 1.1811 in, 1.41732 in, 0.94488 in, 0.62992 in