K-C9C VA2 plus C9C AV-IO-Link interfaces isolated

C9C

Configurable force transducer K-C9C

Miniature force transducer for compressive forces
Accuracy class 0.2
Strain gage measurement system
Nominal (rated) sensitivity 1 mV/V
Stainless steel

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

The K-C9C is our miniature sensor for compressive forces - ready to be configured in accordance with your needs.

NEW: IO-LINK option with inline amplifer.

Find bellow some explanations to our options.

Capacity

The sensor is available in measurement ranges from 50 N to 50 kN.

Cable length

The standard version of the C9C is supplied with a 1.5 m cable (01M5). Additionally, the force transducer is available with the following cable lengths: 3 m (03M0), 5 m (05M0), 6 m (06M0), 7 m (07M0) and 12 m (12M0).

NOTE: Versions with inline amplifiers (VA1, VA2 and VAIO) can only be combined with 1.5 m and 3 m cable lengths.

Electrical connection and amplifier options

If requested, we can mount one of the following connectors on the C9C:

Y = Free ends, no plug assembly
F = D-sub-HD, 15-pin, for connecting to MGC+ (e.g. AP01) or Scout amplifiers
Q = HD-sub-HD, 15-pin, for connecting to many HBK signal conditioners in the Quantum series (MX410, Mx440, MX840, MX430, MX238)
N = MS plug, for connecting to HBK signal conditioner, such as MGC+ (AP03), DMP or DK38
M = M12-plug, 8-pin, for connecting to the digiBOX and DSE measuring amplifiers
VA1 = With inline amplifier 0 … 10 V
VA2 = With inline amplifier 4 … 20 mA
VAIO = With inline amplifier IO-Link

Transducer identification

You can order your sensor with a “Transducer Electronic Data Sheet”, TEDS (T). In this case, your sensor is equipped with an electronic memory that is programmed with the technical characteristics of the sensor. If the sensor is connected to an instrument with TEDS 0-wire functionality, for example, HBK's Quantum models or the ClipX modules, the instrument will read out the specific data and the setup process will run automatically.

NOTE: TEDS can only be ordered in conjunction with a plug option (Option F, Q, N or M). TEDS is only available for sensors without an inline amplifier module.

Firmware version

If you order a C9C with the VAIO option, you will get the latest firmware version, unless you choose an older version that is still available.

C9C - Data Sheet	Data Sheets	English
C9C - Mounting Instructions	Mounting Instructions	English, Italian, French, German
Release Notes - IO-Link Force Sensors	Release Note	English

Sales documents

Reliable force measurement - Brochure

Brochure

English

Certificates and Approvals

U9C, U9CCV MPZ..., C9C, C9CCV MPZ... - EU Declaration of Conformity

Declaration of Conformity

English

C9C capacity 0.5 kN - CAD	CAD Step Files
C9C Thrust Piece capacity 0.5-20kN - CAD	CAD Step Files
C9C capacity 10 kN - CAD	CAD Step Files
C9C capacity 200 N - CAD	CAD Step Files
C9C capacity 20 kN - CAD	CAD Step Files
C9C capacity 50kN - CAD	CAD Step Files
Inline Amplifier capacity 50 N – 50 kN CAD-File	CAD Step Files
C9C Thrust Piece capacity 50kN - CAD	CAD Step Files
C9C capacity 100 N - CAD	CAD Step Files
C9C capacity 5 kN - CAD	CAD Step Files
C9C capacity 1 kN - CAD	CAD Step Files
C9C capacity 2 kN - CAD	CAD Step Files
C9C capacity 50 N - CAD	CAD Step Files
IO1 - firmware v1.2.6	Firmware
IO2 - firmware v2.0.0	Firmware
IO3 - firmware v2.0.8	Firmware
IO4 - firmware v2.0.10	Firmware

Key attributes for industrial force transducers
Maximum capacity (nominal load)	50 N, 100 N, 200 N, 0.5 kN, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN
Maximum capacity (nominal load)	11.2 lbf, 22.5 lbf, 45 lbf, 112 lbf, 225 lbf, 450 lbf, 1.12 klbf, 2.5 klbf, 4.5 klbf, 11.2 klbf
Tensile / compression	Compression
Type / technology	Strain Gauge
Calibration	Calibrated
Output signal	mV/V (passive strain gauge), Voltage (0…10V), Current (4-20mA), IO-Link
HBK Accuracy class	0.2
Load cell design	Miniature sensor
Degree of protection	IP67
Mechanical adaptation	Spherical load introduction
Height (without accessories)	13 mm, 15 mm, 28 mm
Height (without accessories)	0.512 in, 0.591 in, 1.1 in
Diameter (without cable or plug)	26 mm, 46 mm
Diameter (without cable or plug)	1.02362 in, 1.81102 in

Product Code	Description
1-KAB168-20	Connection cable, M12, 20m, free ends
1-KAB168-5	Connection cable, M12, 5m, free ends

Main Menu

Main Menu

Main Menu

Main Menu

Configurable force transducer K-C9C

The K-C9C is our miniature sensor for compressive forces - ready to be configured in accordance with your needs.

Capacity

Cable length

Electrical connection and amplifier options

Transducer identification

Firmware version

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com