HBKShop | Training | Resources.

C9C

Configurable, relaible, compact, dynamic: C9C is a cost-effective miniature force sensor for compressive forces for many tasks in production or testing applications.

NEW: Available as cost-effective digital sensor with IO-Link interface. Configure your C9C here.

C9C

expand_more

chevron_left

chevron_right

C9C Miniature Load Cell: For Measurement of Compressive Forces

The compact and cost-effective C9C type series force sensors reliably measure tensile and compressive force where space is limited. Due to their high fundamental frequency, they are suitable for very fast measurements. Like all strain gauge-based transducers, the C9C sensors also allow for static forces to be measured with long-term stability. They ensure both robustness and plug and measure solution due to their welded design from stainless steel and flexible to order concept. Available as passive load cell or with hard-wired inline amplifier with analogue or digital output signals.

HBK accuracy class: 0.2
Capacities: 50 N ... 50 kN
Output signals: mV/V (passive), 0...10 V, 4 ...20 mA or IO-Link

New: With the new option "VAIO", the C9C comes along with an digital inline - amplifier and IO-Link interface. Your advantages:

Improved reliability: The Sensor Health monitoring of the C9C sends warnings in case of exceeding temperature or mechanical limits before problems occur.
More information: Statistical information such as number of sampels or mean value are available.
Lower costs, easy setup: The C9C with the VAIO option comes along as adjusted sensor. When connected to an IO-Link master, you will get immediately precise readings in Newton. Low cabling costs.
Standard instrument features: Limit switches, peak detection, digital output, filter.
Fast: Internal sampling rate: 40 kHz, 0.9 ms cycling time to the IO-Link master.
Greater precision: Use your calibration and improve the linearity of your C9C.

Benefits of all C9C:

Small, dynamic and robust

Small diameter and flat design
Welded design from stainless steel; EMC-tested
High stiffness and small masses, leading to high fundamental frequency
Highly flexible cable, suitable for drag chains, resistance against most oils

Besides being compact, the sensor is robust, EMC-tested, and delivers reliable results. It is ideal for measuring fast processes.

Immediately ready for use

Various practical cable lengths, cable is suitable for drag chains and fuel-resistant
If chosen without in-line amplifier: TEDS available and available with a mounted plug for all HBK measuring amplifiers on request

Time-saving plug-and-play sensors ideally suited for industrial environments.

Optionally available with inline - amplifier

Industrial standard interfaces available: 0...10 V, 4...20 mA or IO-Link
Measurement chain instead of sensor: No need to configure the measuring amplifier
Analogue or digital: Coming along as calibrated measurement chains, simplified set-up process
Cost effective due to reduced cable costs and simplyfied integration. No space in the cabinet required

Easier integration, less costs and more reliability with the amplifier options.

Filter

Maximum capacity (nominal load) keyboard_arrow_down
Maximum capacity (nominal load) keyboard_arrow_down
Mechanical adaptation keyboard_arrow_down
Height (without accessories) keyboard_arrow_down
Height (without accessories) keyboard_arrow_down
Diameter (without cable or plug) keyboard_arrow_down
Diameter (without cable or plug) keyboard_arrow_down

Code	Maximum capacity (nominal load)	Maximum capacity (nominal load)	Height (without accessories)	Height (without accessories)	Diameter (without cable or plug)	Diameter (without cable or plug)
1-C9C/0.5KN	0.5 kN	112 lbf	13 mm	0.512 in	26 mm	2.066925 in
1-C9C/1KN	1 kN	225 lbf	13 mm	0.512 in	26 mm	3.1496 in
1-C9C/2KN	2 kN	450 lbf	13 mm	0.512 in	26 mm	3.1496 in
1-C9C/5KN	5 kN	1.12 lbf	13 mm	0.512 in	26 mm	2.251964 in
1-C9C/10KN	10 kN	2.25 klbf	13 mm	0.512 in	26 mm	3.1496 in
1-C9C/20KN	20 kN	4.5 klbf	13 mm	0.512 in	26 mm	3.1496 in
1-C9C/50KN	50 kN	11.2 klbf	28 mm	1.1 in	46 mm	3.1496 in
1-C9C/50N	50 N	11.2 lbf	15 mm	0.591 in	46 mm	3.1496 in
1-C9C/100N	100 N	22.5 lbf	15 mm	0.591 in	46 mm	2.972435 in
1-C9C/200N	200 N	45 lbf	15 mm	0.591 in	46 mm	3.1496 in
K-C9C	50 N, 100 N, 200 N, 0.5 kN, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN	11.2 lbf, 22.5 lbf, 45 lbf, 112 lbf, 225 lbf, 450 lbf, 1.12 klbf, 2.5 klbf, 4.5 klbf, 11.2 klbf	13 mm, 15 mm, 28 mm	0.512 in, 0.591 in, 1.1 in	26 mm, 46 mm	1.02362 in, 1.81102 in

C9C - Data Sheet	Data Sheets	English
C9C - Mounting Instructions	Mounting Instructions	English, Italian, French, German

Sales documents

Reliable force measurement - Brochure

Brochure

English

Certificates and Approvals

U9C, U9CCV MPZ..., C9C, C9CCV MPZ... - EU Declaration of Conformity

Declaration of Conformity

English, English (US)

C9C capacity 50 N - CAD	CAD File
C9C capacity 100 N - CAD	CAD File
C9C capacity 200 N - CAD	CAD File
C9C capacity 0.5 kN - CAD	CAD File
C9C capacity 1 kN - CAD	CAD File
C9C capacity 2 kN - CAD	CAD File
C9C capacity 5 kN - CAD	CAD File
C9C capacity 10 kN - CAD	CAD File
C9C capacity 20 kN - CAD	CAD File
C9C capacity 50kN - CAD	CAD File
C9C Inline Amplifier AV12 capacity 50N-50kN: - CAD	CAD File

C9C
Maximum capacity (nominal load)	2 kN, 100 N, 1 kN, 10 kN, 20 kN, 50 N, 200 N, 0.5 kN, 5 kN, 50 kN
Maximum capacity (nominal load)	450 lbf, 22.5 lbf, 225 lbf, 2.25 klbf, 4.5 klbf, 11.2 lbf, 45 lbf, 112 lbf, 1.12 klbf, 2.5 klbf, 11.2 klbf, 1.12 lbf
Direction	Compression
Type / technology	Strain Gauge
Calibration	Calibrated
Output signal	mV/V (passive strain gauge), Voltage (0…10V), Current (4-20mA), IO-Link
HBK Accuracy class	0.2
Load cell design	Miniature sensor
Degree of protection	IP67
Mechanical adaptation	Spherical load introduction
Height (without accessories)	13 mm, 15 mm, 28 mm
Height (without accessories)	0.512 in, 0.591 in, 1.1 in
Diameter (without cable or plug)	26 mm, 46 mm
Diameter (without cable or plug)	3.1496 in, 2.972435 in, 1.02362 in, 1.81102 in, 2.066925 in, 2.251964 in

List of accessories available for all variants of this family

Product Code	Description
1-EDO9/20KN	Trust Piece for C9C/0.5 to 20KN
1-KAB168-5	Connection cable, M12, 5m, free ends
1-EDO9/50KN	Trust Piece for C9C/50KN
1-KAB168-20	Connection cable, M12, 20m, free ends

Related Products

No more result to load

Modern Slavery Statement Imprint Cookie Policy Privacy Policy Sitemap Ethical Business Company Profile