arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

C11

C11 ultra miniature sensors measure compressive force in extremely limited spaces and can endure temperatures of up to 120 °C.

img

C11

expand_more
chevron_left
chevron_right

C11 Subminiature Load Cell: Extremely Compact Dimensions and an Outstanding Temperature Range

The load cell design is based on the robust membrane principle. Due to its high stiffness, the C11 can be used for fast force measurements; the strain gauge principle also allows static measurements. Despite its minimal dimensions, the sensor has good accuracy. The button load cell casing is made of stainless steel to allow for industrial use. The C11 is designed as a Faraday cage; cable shield and sensor housing are galvanically connected. This guarantees interference-free measurements even under unfavorable EMC conditions. It also offers an outstanding temperature range from -20 to +120 °C.
 
The load is applied at the top by a spherical load button, which facilitates a central force application.

  • HBM accuracy class: 0.5
  • Capacities: 50 N to 2 kN

This product is offered in partnership with Kyowa Electronic Instruments.

Extremely small

  • Height: 4 mm (50 to 200 N) or 7 mm (≥ 500 N)
  • Diameter: 10 mm or 16 mm
  • Small displacements – extremely high natural frequencies

Minimal dimensions allow force measurements almost anywhere; the load cell is suitable for fast measurements.

Reliable

  • Stainless steel materials
  • EMC tested
  • Temperature range: -20... +120 °C

Reliable force measurements for industrial environments, even at high temperatures.

Static and dynamic measurements

  • Strain-gauge measuring principle
  • Virtually no drift allows its use in monitoring tasks

Perfectly suitable for static and dynamic force measurement.

Filter

close
C11 - Data Sheet Data Sheets English
C11 - Operating Manuals Manual English, French, German

Sales documents

Reliable force measurement - Brochure Brochure English

Certificates and Approvals

C11 - EU Declaration of Conformity Declaration of Conformity English
C11
Maximum capacity (nominal load) 200 N, 1 kN, 50 N, 2 kN, 100 N, 500 N
Maximum capacity (nominal load) 45 lbf, 225 lbf, 11.2 lbf, 450 lbf, 22.5 lbf, 112 lbf
Direction Compression
Type / technology Strain Gauge
Calibration Calibrated
Output signal mV/V (passive strain gauge)
HBK Accuracy class 0.5
Load cell design Miniature sensor
Degree of protection IP64
Mechanical adaptation Spherical load introduction
Height (without accessories) 4 mm, 7 mm
Height (without accessories) 0.16 in, 0.28 in
Diameter (without cable or plug) 10 mm, 16 mm
Diameter (without cable or plug) 0.3937 in, 0.62992 in