FS62PSS

Fully dielectric sensor to be glued to flat or bent surfaces for high strain and laboratory applications.

FS62PSS

expand_more

chevron_left

chevron_right

Glueable sensor for all types of surfaces including inhomogeneous materials such as concrete or composite
High measurement ranges of ±5000µm/m and outstanding fatigue resistance
With aramid cables without any metallic components or armoured cables for rougher environments
For temperature compensation, please consider its temperature sensor equivalent FS63CTS
Protect with ABM75 or AK22 for longevity

Three types of cable protection: steel reinforcement for demanding environments
Electrical isolation against explosive atmospheres, high voltage areas, and intense electromagnetic fields

Effective even in hazardous environments

Dual lead fibers for connecting a large number of combined sensors in a single optical cable

Easy deployment of large sensing networks with less cabling requirements

Sensors produced through-the-coating femtosecond to withstand high strain and fatigue

Accurate measurements even in materials with high levels of strain

Code	Name
1-FS62PSS-1510	Optical Patch Strain Sensor FC 1510
1-FS62PSS-1520	Optical Patch Strain Sensor FC 1520
1-FS62PSS-1530	Optical Patch Strain Sensor FC 1530
1-FS62PSS-1540	Optical Patch Strain Sensor FC 1540
1-FS62PSS-1550	Optical Patch Strain Sensor FC 1550
1-FS62PSS-1560	Optical Patch Strain Sensor FC 1560
1-FS62PSS-1570	Optical Patch Strain Sensor FC 1570
1-FS62PSS-1580	Optical Patch Strain Sensor FC 1580
1-FS62PSS-1590	Optical Patch Strain Sensor FC 1590
K-FS62PSS	optical Config. Patch Strain Sensor

FS62PSS newLight - Data Sheet	Data Sheets	English
FS62PSS, FS63LTS newLight - Mounting instructions	Mounting Instructions	English

Sales documents

HBM FiberSensing: Optical Measurement Solutions - Brochure

Brochure

English

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance

Declaration of Conformity

English

FS62PSS
Type/technology	Fiber Bragg Grating
Application	Optical stress measurement
Geometry	Linear
Measuring grid length	5 mm
Measuring grid length	0.2 in
Measuring grid width	0.195 mm
Measuring grid width	0.008 in
Carrier length	40 mm
Carrier length	1.6 in
Carrier width	12 mm
Carrier width	0.47 in
Temperature range	Limited temperature range
Nominal resistance	Other resistance
Gauge factor (measuring grid material)	FBG (ca. 0.79)
Temperature response	No matching of temperature response
Maximum elongation	Enhanced
Fatigue life	Enhanced
Connection configuration	Optical fiber
Mounting	Bondable
Grid protection	Other

List of accessories available for all variants of this family

Product Code	Description
1-X280	2-comp. adhesive X280-6 x 10 g
1-X60	2-comp. q.-act. adhesive X60/100g+2x40ml
1-X60/A	Quick-act. adhesive X60/Comp. A - 100 g
1-X60/A-NP	Quick-act. adhesive X60/Comp. A - 400 g
1-X60/B	Quick-act. adhes. X60/Comp. B - 2 x 40ml
1-X60/B-NP	Quick-act. adhesive X60/Comp.B - 2x200ml
1-ABM75	Covering putty with aluminum foil ABM75
1-AK22	Covering putty AK22
1-RMS1	Cleaning kit RMS1
1-RMS1-SPRAY	Cleaning kit RMS1 spray
1-FS-SPLITTER	Fiber Optic Splitter
1-KLEBEBAND	Fixing tape
1-FS80-100	Optical interconnection FC/FC
1-FS80-300	Optical interconnection SC/SC
1-FS81-1M	Polyester Optical Patch Cable 1m FC
1-FS82-2M	Aramid Optical Patch Cable 2m FC
1-FS82-5M	Aramid Optical Patch Cable 5m FC
1-FS83-2M	Armor Optical Patch Cable 2m FC
1-FS83-5M	Armor Optical Patch Cable 5m FC
K-FS82	Configurable Aramid Patch Cable
K-FS83	Optical outdoor patch cable