VY46-3/120

Strain gauge 3/120 VY46

Strain gauge series Y
(Universal SG for stress analysis)
Geometry: shear/torsion full bridge
Measuring grid material: constantan
Carrier foil: polyimide
4 measuring grids
Measuring grid covered
Integrated solder tabs
Temp. response: quartz glass/composite
(0.5 ppm/K)
Nominal resistance: 120 ohms
Measuring grid length: 3 mm
Contents per package: 5 pcs.
Minimum order quantity: 3 packages

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

VY full bridge strain gauges (SGs) have 4 measuring grids, which are arranged so that each is offset to the next at an angle of 90°. Typical applications for full bridge SGs include measurements on tension/compression bars and torsion bars and determining shear stresses as they occur in shear beams.

With types VY1 (0°/90° T full bridge) and VY4 (shear/torsion full bridge) we offer you strain gauges (SG) in various geometries and sizes, each available with temperature responses adapted to the following materials:

Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); temperature matching code: 1
Aluminum (23 ppm/K; 12.8 ppm/°F); temperature matching code: 3
Austenitic steel (16 ppm/K, 8.9 ppm/°F); temperature matching code: 5
Silica/composite (0,5 ppm/K; 0.3 ppm/°F); temperature matching code: 6
Titanium and gray cast iron (9 ppm/K; 5.0 ppm/°F); temperature matching code: 7
Plastic (65 ppm/K; 36.1 ppm/°F); temperature matching code: 8
Molybdenum (5.4 ppm/K; 3.0 ppm/°F); temperature matching code: 9

Insert the temperature matching code in place of the placeholder “x” to get the ordering number of the strain gauge you need. Strain gauges marked with a # symbol are only available matched to aluminum, ferritic and austenitic steel

Strain gauges available in 120 and 350 Ohms Measuring grid consists of constantan, measuring grid carrier is polymide Fast delivery for preferred strain gauge types - available from stock!

Y Series - Data Sheet	Data Sheets	English
Y Series - Data Sheet	Data Sheets	German
Full-Bridge-Strain-Gauge Access Points - Technical Information	Tech Notes	English, German

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance

Declaration of Conformity

English

Key Attributes: Strain Gauges
Type/technology	Foil strain gauge
Application	Stress Analysis / structural testing
Geometry	Full bridge circuit
Measuring grid length	3 mm
Measuring grid length	0.118 in
Measuring grid width	1.3 mm
Measuring grid width	0.051 in
Carrier length	9.8 mm
Carrier length	0.386 in
Carrier width	10 mm
Carrier width	0.394 in
Temperature range	Standard (up to 200°C)
Nominal resistance	120 Ohms
Gauge factor (measuring grid material)	Constantan (ca 2.0)
Temperature response	Silica / composite (0,5 ppm/K; 0.3 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Integrated solder tabs
Mounting	Bondable
Grid protection	Covered

Product Code	Description
1-CA80	Cyanoacrylate adhesive (CA80) - 10 mL
1-X60	2-comp. q.-act. adhesive X60/100g+2x40ml
1-X60/A	Quick-act. adhesive X60/Comp. A - 100 g
1-X60/A-NP	Quick-act. adhesive X60/Comp. A - 400 g
1-X60/B	Quick-act. adhes. X60/Comp. B - 2 x 40ml
1-X60/B-NP	Quick-act. adhesive X60/Comp.B - 2x200ml
1-ABM75	Covering putty with aluminum foil ABM75
1-BR120	Butyl rubber protectiv covering BR120
1-RMS1-300	RMS1 solvent mixture 300 ml
K-KAB-ML	Measurement cable by the meter