CLY4

Configurable strain gauge, type LY4

Strain gage series Y
Geometry: linear
Measuring grid material: constantan
Carrier foil: polyimide
1 measuring grid
Measuring grid covered
50 mm fluoropolymer-insulated wires
with ribbon cable attached
Contents per package: 10 pcs.
Minimum order quantity:
- for preferred types: none
- for other types: 3 packages

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

Pre-wired Strain Gauges: Fast, Safe and Convenient to Use

Leave the soldering to HBK and avoid a potential source of error by ordering pre-wired strain gauges. HBK has set up a “fast lane” service for small orders, which helps provide you the strain gauge you need with the cable of required length within only 10 days.

HBK strain gauges comply with current RoHS requirements, and new materials have been used in making the stranded connection wires more flexible and easier to use. TPE insulated cables allow the use in a temperature range between -40°C and 120°C.

Advantages

Fast installation
Increased reliability
Fluoropolymer-insulated stranded wire (with non-stick properties)
Temperature compensation for most materials
Cable length from 0.5 m to 10 m
RJ11 connectors for the CANHEAD amplifier system
Grid length from 0.6 mm to 10 mm
Strain gauges with 3- and 4-wire configurations
Stickers for simplified parameterization and documentation

Y Series - Data Sheet	Data Sheets	English
Y Series - Data Sheet	Data Sheets	German

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance

Declaration of Conformity

English

Key Attributes: Strain Gauges
Type/technology	Foil strain gauge
Application	Stress Analysis / structural testing
Geometry	Linear
Measuring grid length	0.6 mm, 1.5 mm, 3 mm, 6 mm, 10 mm, 20 mm, 50 mm, 100 mm
Measuring grid length	0.024 in, 0.059 in, 0.118 in, 0.236 in, 0.394 in, 0.787 in, 1.969 in, 3.937 in
Measuring grid width	1.1 mm, 1.2 mm, 2.7 mm, 5 mm, 0.5 mm, 0.8 mm, 1 mm, 1.2 mm, 2.3 mm, 2.5 mm, 2.8 mm, 4.1 mm, 4.2 mm
Measuring grid width	0.043 in, 0.047 in, 0.106 in, 0.197 in, 0.02 in, 0.031 in, 0.039 in, 0.047 in, 0.09 in, 0.098 in, 0.11 in, 0.161 in, 0.165 in
Carrier length	6 mm, 7 mm, 8 mm, 13.9 mm, 18 mm, 31.8 mm, 63.6 mm, 114.8 mm, 165.6 mm, 9.2 mm, 10.9 mm
Carrier length	0.236 in, 0.275 in, 0.315 in, 0.547 in, 0.709 in, 1.252 in, 2.504 in, 4.52 in, 6.52 in, 0.362 in, 0.429 in
Carrier width	4 mm, 5 mm, 5.9 mm, 8 mm, 8.2 mm
Carrier width	0.157 in, 0.197 in, 0.232 in, 0.315 in, 0.323 in
Temperature range	Limited temperature range
Nominal resistance	120 Ohms, 350 Ohms, 1000 Ohms
Gauge factor (measuring grid material)	Constantan (ca 2.0)
Temperature response	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F), Austenitic steel (16 ppm/K; 8.9 ppm/°F), Silica / composite (0,5 ppm/K; 0.3 ppm/°F), Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F), Plastic (65 ppm/K; 36.1 ppm/°F), Molybdenum (5.4 ppm/K; 3.0 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Fluoropolymer-insulated connection wires, Pre-wired (TPE-insulated ribbon cable)
Mounting	Bondable
Grid protection	Covered

Product Code	Description
1-CA80	Cyanoacrylate adhesive (CA80) - 10 mL
1-X60	2-comp. q.-act. adhesive X60/100g+2x40ml
1-X60/A	Quick-act. adhesive X60/Comp. A - 100 g
1-X60/A-NP	Quick-act. adhesive X60/Comp. A - 400 g
1-X60/B	Quick-act. adhes. X60/Comp. B - 2 x 40ml
1-X60/B-NP	Quick-act. adhesive X60/Comp.B - 2x200ml
1-ABM75	Covering putty with aluminum foil ABM75
1-BR120	Butyl rubber protectiv covering BR120
1-RMS1-300	RMS1 solvent mixture 300 ml
K-KAB-ML	Measurement cable by the meter