DY Strain Gauges with 2 Parallel Measuring Grids for Measurements on Bending Beams
DY (Double linear)
DY strain gauges have two measuring grids arranged parallel to each other. Typical applications for these strain gauges (SGs) include measurements on bending beams.
With types DY1 and DY4 we offer you strain gauges (SG) in various geometries and sizes, each available with temperature responses adapted to the following materials:
Insert the temperature matching code in place of the placeholder “x” to get the ordering number of the strain gauge you need. Strain gauges marked with a # symbol are only available matched to aluminum, ferritic and austenitic steel
Strain gauges available in 350 Ohms Measuring grid consists of constantan, measuring grid carrier is polymide Fast delivery for preferred strain gauge types - available from stock!
| Y Series - Data Sheet | Data Sheets | English |
| Y Series - Data Sheet | Data Sheets | German |
Certificates and Approvals
| Strain Gauges and Accessories - Statement of Compliance | Declaration of Conformity | English |
| Type/technology | Foil strain gauge |
| Application | Stress Analysis / structural testing |
| Geometry | Double linear |
| Measuring grid length | 6 mm, 3 mm, 1.5 mm |
| Measuring grid length | 0.236 in, 0.118 in, 0.059 in |
| Measuring grid width | 3.2 mm, 2.7 mm, 1.8 mm, 6 mm |
| Measuring grid width | 0.126 in, 0.106 in, 0.071 in, 0.236 in |
| Carrier length | 1.7 mm, 9 mm, 12.5 mm, 5.5 mm, 10.7 mm, 8.2 mm |
| Carrier length | 0.354 in, 0.492 in, 0.217 in, 0.421 in, 0.323 in |
| Carrier width | 9 mm, 8 mm, 9.4 mm, 6 mm |
| Carrier width | 0.354 in, 0.315 in, 0.37 in, 0.236 in |
| Temperature range | Limited temperature range, Standard (up to 200°C) |
| Nominal resistance | 350 Ohms |
| Gauge factor (measuring grid material) | Constantan (ca 2.0) |
| Temperature response | Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F), Austenitic steel (16 ppm/K; 8.9 ppm/°F), Silica / composite (0,5 ppm/K; 0.3 ppm/°F), Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F), Plastic (65 ppm/K; 36.1 ppm/°F) |
| Maximum elongation | Standard |
| Fatigue life | Standard |
| Connection configuration | Fluoropolymer-insulated connection wires, Leads, Integrated solder tabs |
| Mounting | Bondable |
| Grid protection | Covered |
List of accessories available for all variants of this family
To optimize the measuring point documentation each strain gauge includes two stickers which can be placed next to the measuring point and near the measuring amplifier. Benefit from the parameter information directly in the measurement setup:
Please note: newly produced strain gauges all come with the sticker in stock, strain gauges still in stock do not have this feature yet.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, MicroStrain and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
1-CA80
1-X60
1-X60/A
1-X60/A-NP
1-X60/B
1-X60/B-NP
1-ABM75
1-BR120
1-RMS1-300
K-KAB-ML