arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

Weldable gauges (LS31HT/TS81HT)

The LS31HT and TS81HT strain gauge is best suited for applications with elevated temperatures on weldable components, such as mechanical load analysis on buildings and infrastructure.

img

Weldable gauges (LS31HT/TS81HT)

expand_more
chevron_left
chevron_right

LS31HT & TS81HT: Weldable Strain Gauges for Rough Environments and High Temperatures

The LS31HT and TS81HT weldable strain gages are suitable for spot welding to steel structures and materials. They are ideal for use in the field where the cleanliness required for gluing cannot be guaranteed, for example on construction sites or in manufacturing plants, and can withstand adverse conditions. Such conditions would likely damage the adhesive bond of conventional strain gauges. The weldable strain gauges are mounted by a simple spot welding process that requires little practice*. They are fitted with 0.5m stranded connection wires. 

Typical applications for LS31HT and TS81HT include the mechanical load analysis on bridges, piles, tunnels, buildings, pipelines, wind power plants, and tanks. 

 

*HBK recommends the C33 spot welding machine from VBS-Fügetechnik AG.

Robust

  • Comes on a carrier plate covered with silicone rubber to be spot welded

Withstands harsher operating conditions

Simple to install

  • Easily mounted by simple spot welding method that requires hardly any preparation

Long service life with a permanent attachment to the structure

Reliable

  • Withstands elevated temperatures from -50°C up to +250°C (short time 300°C). 
  • 4-wire configuration

Accurate results under harsh conditions or environments

Filter

close
LS31 HT / TS81 HT - Data Sheet Data Sheets English
LS31 HT, TS81 HT - Instructions for use Instructions For Use English, French, German

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance Declaration of Conformity English
Weldable gauges (LS31HT/TS81HT)
Type/technology Foil strain gauge
Application Stress Analysis / structural testing
Geometry Linear, T rosette
Measuring grid length 6 mm
Measuring grid length 0.236 in
Carrier length 40 mm
Carrier length 1.575 in
Carrier width 10 mm
Carrier width 0.394 in
Temperature range High (up to 350°C)
Nominal resistance 350 Ohms
Gauge factor (measuring grid material) Cr-Ni alloy (ca. 2.2)
Temperature response Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
Maximum elongation Standard
Fatigue life Standard
Connection configuration Fluoropolymer-insulated connection wires
Mounting Weldable
Grid protection Covered

List of accessories available for all variants of this family

Product Code Description
Covering putty with aluminum foil ABM75 1-ABM75 Covering putty with aluminum foil ABM75
Covering putty AK22 1-AK22 Covering putty AK22
Measurement cable by the meter K-KAB-ML Measurement cable by the meter