arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

LC (Linear)

LC Linear strain gauges with1 measuring grid and with leads

img

LC (Linear)

expand_more
chevron_left
chevron_right

The C Series strain gauges are the ideal choice for structural tests at exceptional temperature conditions. They have an enormous temperature range and measure precisely even at very low temperatures down to -269 ° C. For a good mechanical flexibility, as well as flexibility and optimum adaptation to the material to be measured, the measuring grid of the C Series consists of a chrome-nickel special alloy on a polyimide foil.

Strain gauges of the C Series have an extremely wide temperature range at a very good price-performance ratio. The strain gauges of the C Series are available with three different geometries and are used, for example, in research and development, in the automotive industry, as well as in power plants and superconductors.
We offer you strain gauges (SGs) in various geometries and sizes, available with temperature responses adapted  to the following materials:

Ferritic steel (10.8 ppm/K; 6.0 ppm/°F); temperature matching codes: 1
Aluminum (23 ppm/K; 12.8 ppm/°F); temperature matching codes: 3

Temperature range: -269 to +250 ° C
Resistance: 120 and 350 Ohm
Measuring grid lengths: 1.5 to 10 mm
Strain gauges available in 120 and 350 Ohms
Measuring grid consists of chrome-nickel special alloy, measuring grid carrier is polymide
Fast delivery for preferred strain gauge types -  available from stock! 

Filter

close
DMS C Serie - Datasheet Data Sheets English

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance Declaration of Conformity English
LC (Linear)
Type/technology Foil strain gauge
Application Stress Analysis / structural testing
Geometry Linear
Measuring grid length 1.5 mm, 10 mm, 3 mm, 6 mm
Measuring grid length 0.059 in, 0.394 in, 0.118 in, 0.236 in
Measuring grid width 3.3 mm, 3.2 mm, 3.4 mm
Measuring grid width 0.13 in, 0.126 in, 0.134 in
Carrier length 6.4 mm, 16 mm, 8.5 mm, 12 mm, 14 mm, 11 mm
Carrier length 0.252 in, 0.63 in, 0.335 in, 0.472 in, 0.551 in, 0.433 in, 0.251 in
Carrier width 5.5 mm, 8 mm
Carrier width 0.217 in, 0.315 in, 0.216 in
Temperature range Cryogenic
Nominal resistance 350 Ohms, 120 Ohms
Gauge factor (measuring grid material) Cr-Ni alloy (ca. 2.2)
Temperature response Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F), Austenitic steel (16 ppm/K; 8.9 ppm/°F)
Maximum elongation Standard
Fatigue life Standard
Connection configuration Integrated solder tabs, Solder tabs with strain relief
Mounting Bondable
Grid protection Covered, Other