Z30A high-precision reference force transducers for small force. Suitable for use as a reference standard or reference sensor.
The Z30A reference force transducer measures small tensile and compressive forces with extremely high precision. This is why Z30A is frequently used where high precision is needed; as a reference transducer in calibration machines, for transfer measurements in calibration machines and as a working standard.
The Z30A reference transducer exceeds the requirements of the highest accuracy class (00) specified in ISO 376. The electrical connection is made via connectors at the housing and the base plate. Depending on the installation situation, force shunts caused by the measurement cable can be prevented. All sensors up to 1 kN capacity have an overload stop and are protected in case of faulty operations.
Top-level comparison measurements and highly accurate referencing of calibration machines to meet a standard. Is highly mobile, and requires minimal warm-up time.
Traceability and tested quality for use as a transfer standard. Dependable measurement results even in test environments with high levels of electromagnetic interference.
Highly suitable for practical application: Easy integration and high mobility due to variable connection possibilities and a custom shipping case.
Z30A - Data Sheet | Data Sheets | English |
Z30A - Mounting Instructions | Mounting Instructions | English, German |
K-CAB-F (cable) - Data Sheet | Data Sheets | English |
Certificates and Approvals
Z4A, TOP-Z4A, Z30A, TOP-Z30A - EU Declaration of Conformity | Declaration of Conformity | English |
Z30A capacity 50N - CAD | CAD File |
Z30A/TOP-Z30A capacity 100N - CAD | CAD File |
Z30A/TOP-Z30A capacity 200N - CAD | CAD File |
Z30A/TOP-Z30A capacity 500N - CAD | CAD File |
Z30A/TOP-Z30A capacity 1kN - CAD | CAD File |
Z30A/TOP-Z30A capacity 2kN - CAD | CAD File |
Z30A/TOP-Z30A capacity 5kN - CAD | CAD File |
Z30A/TOP-Z30A capacity 10kN - CAD | CAD File |
Maximum capacity (nominal load) | 10 kN, 1 kN, 500 N, 100 N, 2 kN, 5 kN, 50 N, 200 N |
Maximum capacity (nominal load) | 2.25 klbf, 225 lbf, 112 lbf, 22.5 lbf, 450 lbf, 1.12 klbf, 11.2 lbf, 45 lbf |
Direction | Compression, Tension, Both directions |
Type / technology | Strain Gauge |
Calibration | Fulfills ISO 376 |
Output signal | mV/V (passive strain gauge) |
HBK Accuracy class | 0.02 (ISO376) |
Degree of protection | IP50 |
Mechanical adaptation | Central thread |
Height (without accessories) | 90 mm |
Height (without accessories) | 3.54 in |
Diameter (without cable or plug) | 94.5 mm |
Diameter (without cable or plug) | 3.72 in |
List of accessories available for all variants of this family
Please check data sheet for further information.