arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

PACEline CFTplus

CFTplus force transducers are ideal for applications where a wide measurement range is required, such as presses with a large force measurement range.

img

PACEline CFTplus

expand_more
chevron_left
chevron_right

CFTplus Series Piezoelectric Force Transducers: Capacities Ranging from 25 kN to 120 kN

The CFTplus series piezoelectric force transducers are calibrated for three measuring ranges and thus can be used immediately upon installation. There is no need for performing a calibration procedure. The sensitivity is specified in three measuring ranges (1 %, 10%, and 100 %) to guarantee a wide measuring range.

The extremely wide measuring range is typical for the piezoelectric measuring principle. Minimal forces can be reliably measured even under a high initial load.

The CFTplus series force sensors have a minimal displacement, which is why the fundamental frequency is immensely high. Therefore, they are particularly suitable for measuring fast processes, such as press-fit processes.

The EMC-tested force measuring elements are manufactured from rust resistant materials.

  • Capacities: 25, 50, 70 and 120 kN
  • HBK accuracy class: 0.5

 

Precise and dynamic

  • Three calibration points: 1 %, 10 %, and 100 % of the capacity
  • High-quality results owing to the low-drift design
  • Ideal for use in dynamic applications due to their high stiffness and fundamental frequency

Extremely wide measuring range and excellent dynamics

Robust design

  • The CFTplus are made exclusively from stainless materials
  • IP65 degree of protection
  • Immunity to electromagnetic interference
  • Connection dimensions and connectors comply with market standards 

Designed for industrial applications

Easy integration

  • Mounting accessories, such as threaded bushings and centering rings, are included in the scope of supply
  • Simple installation thanks to flange connections on both sides
  • Delivery as pre-stressed and calibrated sensors (no calibration required)
  • Available with four different capacities (25 kN, 50 kN, 70 kN, and 120 kN)
  • Practical accessories, as well as CMD and CMA charge amplifiers, are available

Fast start-up

Filter

close
CFT+ - Data sheet Data Sheets English
CFT - Operating Manuals Manual English, Italian, French, Chinese, German

Certificates and Approvals

CFT/CFT+/CFW/CLP/CSW/CST/CHW - EU Declaration of Conformity Declaration of Conformity English
PACEline CFTplus
Maximum capacity (nominal load) 120 kN, 50 kN, 25 kN, 70 kN
Maximum capacity (nominal load) 27 klbf, 11.2 klbf, 5.62 klbf, 15.7 klbf
Direction Compression
Type / technology Piezoelectric
Calibration Calibrated
Output signal pC (passive piezoelectric)
HBK Accuracy class 0.5
Load cell design Flange mounting, Miniature sensor
Degree of protection IP65
Mechanical adaptation Both side flange mounting
Height (without accessories) 60 mm, 34 mm, 26 mm, 42 mm
Height (without accessories) 2.36 in, 1.34 in, 1.02 in, 1.65 in
Diameter (without cable or plug) 54 mm, 30 mm, 20 mm, 36 mm
Diameter (without cable or plug) 2.251964 in, 2.999994 in, 1.999996 in