C15 config. ref. compress. force transd.

C15

Extremely precise reference force sensor with a high output signal. Measuring range: 10 to 100 % of its capacity. Class 00 per ISO376.

C15

expand_more

chevron_left

chevron_right

The C15 Reference Force Transducer Allows Calibration with Capacities from 2.5 kN to 1 MN

The C15 reference force transducer is a robust (EMC-tested, rustproof, impact and vibration-tested) shear-force transducer with nominal (rated) measuring ranges between 2.5 kN and 1 MN. The C15 meets the requirements of accuracy class 00 per ISO376 in an exceptionally wide measuring range from 10% to 100% of the respective capacity.

Thanks to the sensor’s very high output signal – more than 4 mV/V, with the versions featuring capacities of 25 kN and higher – the full measuring range of the amplifier can be utilized. This guarantees a high resolution and an exceptional signal-to-noise ratio.

Accuracy class to ISO376: 00
HBM accuracy class: 0.02…0.05
Nominal (rated) measuring range: 2.5 kN…1 MN

The sister model of the C15, the U15 reference force transducer, is ideal for reference force measurements with tensile and compressive forces.

Highest accuracy class

Meets the requirements of class 00 per ISO 376 in an exceptionally wide measuring range between 10% and 100% of its capacity for compressive forces
Eccentricity adjustment: Optimized accuracy even for measurements in different mounting positions or with eccentric force application
Can be used as a reference transducer for compressive forces up to 1 MN
Very high output signal of up to 4.5 mV/V; can be adjusted, on request, to 3 mV/V to make full use of the amplifier's input range
Excellent signal-to-noise ratio

Precise measurements in an exceptionally wide measuring range

Individually configurable

Numerous easy-to-order options, TEDS chip, double bridges, rated output adjustment
Practical accessories available, thrust pieces per ISO376
On request, we can perform measurement-chain calibrations
HBK has suitable measuring amplifiers available that are ideally matched to the C15 in terms of the input range

Match the measurement system perfectly to the application – with well-engineered accessories, the right amplifiers, and calibration services

Robust and fast

High rigidity, low deformation under load, and good dynamic behavior
Robust due to the IP67 degree of protection and hermetic welding
Low temperature coefficient of the zero signal and low sensitivity to temperature gradients

Reliably masters dynamic calibration tasks in and outside of the laboratory

C15 - Data Sheet	Data Sheets	English
K-CAB-F (cable) - Data Sheet	Data Sheets	English
C15 - Operating Manuals	Manual	English, Italian, French, Chinese, German

Certificates and Approvals

U10M, U10S, U10F,U15, C10, C15 - EU Declaration of Conformity

Declaration of Conformity

English

C15 capacity 2.5kN-50 kN - CAD	CAD Step Files
C15 capacity 100kN-250 kN - CAD	CAD Step Files
C15 capacity 500 kN - CAD	CAD Step Files
C15 capacity 1 MN - CAD	CAD Step Files

C15
Maximum capacity (nominal load)	2.5 kN, 5 kN, 10 kN, 25 kN, 50 kN, 100 kN, 250 kN, 500 kN, 1 MN
Maximum capacity (nominal load)	562 lbf, 1.12 klbf, 2.25 klbf, 5.62 klbf, 11.2 klbf, 22.5 klbf, 56.2 klbf, 112 klbf, 225 klbf
Direction	Compression
Type / technology	Strain Gauge
Calibration	Fulfills ISO 376
Output signal	mV/V (passive strain gauge)
HBK Accuracy class	00 (ISO376)
Degree of protection	IP67
Mechanical adaptation	Spherical load introduction
Height (without accessories)	64.3 mm, 92 mm, 116 mm, 160.9 mm
Height (without accessories)	2.53 in, 3.62 in, 4.57 in, 6.33 in
Diameter (without cable or plug)	104.8 mm, 153.9 mm, 203.2 mm, 279 mm
Diameter (without cable or plug)	4.13 in, 6.06 in, 8 in, 10.98 in

Product Code	Description
1-EDO3/100KN	Thrust piece to ISO 376 for C10/C15
1-EDO3/1MN	Thrust Piece acc. to ISO 376 for C10/C15
1-EDO3/500KN	Thrust Piece to ISO 376 for C10/C15
1-EDO3/50KN	Thrust Piece to ISO 376 for C10/C15
1-CON/BS1	Connector, bayonet for 4 mm-6.5 mm cable
1-CON/BS2	Connector, bayonet for 6.5 mm or larger
1-EEK4	Ground cable, copper, length 400mm
1-EEK6	Ground cable, copper, length 600mm
1-EEK8	Ground cable, copper, length 800mm
1-KAB157-3	Connection cable, bayonet - free ends
1-KAB158-3	Connection cable, thread - free ends
3-3312.0354	Thread connector for U10/C10/U15/C15/C6b
K-CAB-F	Cable, configurable f. force transducers

Showing 10 of 13 results

Extensive range of accessories

TEDS
Thrust pieces per ISO 376
Various connection cables in different, practical lengths and with plugs, soldered on for connection to the amplifier, on request

For more information please refer to the data sheet.

A complete measuring chain: Perfect precision for a perfect price.

The combination of the reference transducer U15 and the precision measuring amplifier module QuantumX MX238B results into an extremely cost-effective precision measuring chain. Thanks to the modular design of the QuantumX modules, you can also easily extend this measuring chain by a number of additional measuring variables, e.g. Temperature, voltage, angle of rotation.

Related Products

Modern Slavery Statement Imprint Cookie Policy Privacy Policy Sitemap Ethical Business Company Profile Do not sell or share my personal information