arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

Exhaust Noise Partner

Exhaust noise measurement solution for testing light vehicles and noise level enforcement with a streamlined workflow and toolset that minimizes the risk of error while still requiring minimal training.

img

Exhaust Noise Partner

expand_more
chevron_left
chevron_right

This B&K 2245 Sound Level Meter solution is a focused toolset for measuring exhaust noise. Rated IP55, this system is durable enough to be used in the shop or on the street. Whether you are performing stationary exhaust noise testing in a workshop or performing street-side spot checks for law enforcement, this task-focused solution is the ideal tool. Because of the lockable setup, wireless operation capabilities and intuitive interface, a single user can easily preform the measurement and be confident that the data measured will be valid and accurate, with minimal training.

B&K 2245 is type approved by PTB and CEM.

 

Mobile App

Downloading the Noise Partner app to your phone from the App Store® enables the measurement to be wirelessly controlled from a mobile device by a single person – from the driver’s seat of the vehicle or safely on the no-traffic side of the vehicle. Via the app interface, pictures, text and voice notes, and videos can be embedded with the measurements.

 

PC App

When the measurement is finished, the data can be transferred to a PC, wirelessly or with the supplied USB cable. Noise Partner PC software is preconfigured with the tools needed for storing, reviewing and reporting your data.

 

USER SCENARIOS

  • Stationary exhaust noise testing according to ISO 5130, SAE J1169, SAE J1492 or SAE J1287
  • Roadside exhaust noise regulation enforcement

CHARACTERISTICS

  • Colour LCD with a bright, clean layout – most important information shown with a clear indication of measurement status with colour header
  • Single-person operation with the mobile app
  • Measurement status light ring visible from any angle
  • Built-in Li-Ion battery, typically providing more than 14 hours operation with Wi-Fi® enabled
  • 16 GB built-in storage for measurements and annotations
  • Integrated Wi-Fi and Bluetooth® Low Energy for connection to mobile and PC apps.
  • Single, weatherproof USB-C connector for charging, data transfer to PC and more
Language keyboard_arrow_down
Exhaust Noise Partner
Number of inputs Single channel
Standard IEC 61672, ANSI S1.4, Other national standards
Sound field Free field, Diffuse field
Polarization None
Sensitivity 50 mV/Pa
Lower frequency 6 Hz
Higher frequency 20 kHz
Lower dynamic range 23.2 dB
Higher dynamic range 140.3 dB
Dimension (length x width x depth) 260 x 68 x 37 mm
Dimension (length x width x depth) 10.2 x 2.7 x 1.5 in
Weight 370 g
Weight 13 oz
Degree of protection IP55
Display 240 x 320 dot
Operating time on battery 13 h
Measurement storage 16 GB
Communication interface USB
Analysis software Frequency analysis