arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

PACEline CMC

The PACEline CMC series piezoelectric measurement chains convert forces directly into a 0 to 10 V signal. Customizable and suitable for fitting processes.

img

PACEline CMC

expand_more
chevron_left
chevron_right

CMC Series Piezoelectric Measurement Chains for Capacities ranging from 5 kN to 120 kN

Piezoelectric measurement chains of the CMC series are used in various industrial production tasks and reliably convert the forces they measure into a 0 to 10 V signal. They are calibrated throughout, which means that the measurement amplifier doesn’t have to be adjusted and the relationship between the output signal in volts and the force measurement in newtons is clearly documented in the accompanying documents.

Typical for the piezoelectric principle, the sensors have a wide measurement range and measure large and small forces reliably – even under a high initial load. The measurement chains, based on CFT variations with a 5 kN or 20 kN capacity are calibrated at 100% and at 20% of the nominal force, while all other CMC measurement chains have calibrations at 1%, 10% and 100% of their nominal force. The measurement ranges can be switched via a digital input on the charge amplifier; zeroing is triggered just as easily.

All piezoelectric force measurement chains in the CMC series consist of a pre-stressed and calibrated sensor, a charge cable and a charge amplifier. The components can be freely combined and allow the measurement chain to ideally adapt to the respective measurement task at hand.

Reliable and suitable for industrial use

  • Low drift
  • Insensitive to EMC interference
  • Stainless steel materials, IP65 degree of protection

Long-term reliable measurement results in industrial environments.

Easy integration

  • Flange connection on both sides, pre-stressing not necessary
  • Standard dimensions and connections
  • Calibrated as a measurement chain
  • Practical accessories are available

Easily fits into new and existing structures without calibration.

Wide measuring range

  • Very good linearity due to excellent mechanical quality
  • Small forces can be measured even under large preloads
  • Calibrated in two or three measuring ranges depending on the nominal force of the sensor

Ideal for multi-step processes. Magnifying function available (by switching the measurement range), that is, amplification can be increased by a factor of 5 if required.

K-CMC - Datasheet Data Sheets English
CMC - Operating Manuals Manual English, Italian, French, German

Certificates and Approvals

CMC - EU Declaration of Conformity Declaration of Conformity English
PACEline CMC
Maximum capacity (nominal load) 5 kN, 20 kN, 25 kN, 50 kN, 70 kN, 120 kN
Maximum capacity (nominal load) 1.12 klbf, 4.5 klbf, 5.62 klbf, 11.2 klbf, 15.7 klbf, 27 klbf
Direction Compression
Type / technology Piezoelectric
Calibration Calibrated
Output signal Voltage (0…10V)
HBK Accuracy class 0.5
Degree of protection IP65
Mechanical adaptation Both side flange mounting
Height (without accessories) 10 mm, 14 mm
Height (without accessories) 0.393 in, 0.551 in
Diameter (without cable or plug) 54 mm, 19 mm, 30 mm, 13 mm, 36 mm
Diameter (without cable or plug) 2.12598 in, 0.74803 in, 1.1811 in, 0.51181 in, 1.41732 in