TU23K1.6/1K0BE

Strain gauge 1.6/1000BE TU23K

Strain gauge with options series U
(Strain gauge for Transducers)
Geometry: T rosette
Measuring grid: Ni-Cr special alloy
Carrier foil: PEEKF
2 grids, offset 90° to each other,
connected in a half bridge circuit
Measuring grid covered
'Stick-on' (with applied adhesive layer)
Temp. resp.: aluminum (23 ppm/K)
Creep adjustment: K (eq. to u = 6s)
Nominal resistance: 1000 ohms
Measuring grid length: 1.6 mm
Contents per package: 100 pcs.

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

The U series universal strain gauges are perfect for transducer manufacturers. Combining the conventional constantan or Modco (modified Karma) measuring grid foils with high-performance PEEKF carrier material provides strain gauges that unite easy handling with high accuracy and outstanding humidity behavior. U series strain gauges also offer a compensated modulus of elasticity, increased sensitivity, and enhanced fatigue strength at high strains.

U series comes in different geometries, resistance values, and grid lengths as standard. Custom designs can be developed in just a few weeks.

Robust

Excellent chemical resistance
Very low water absorption and resistance to humidity
Small radii of curvature are possible, allowing for installation in small drill holes

Easy handling during installation and long service life.

Precise

Very high stiffness (modulus of elasticity) and, thus, capable of transferring the measuring body’s deformation directly to the measuring grid
Higher thermal conductivity than polyimide

Suitable for transducers with high accuracy requirements.

Flexible

Over 30 different standard versions for steel or aluminum with 10 different creep adjustments
Various options available such as encapsulation, pre-coating with adhesive, or pre-tinned solder tabs
Custom designs possible

Perfect for your solution, regardless of whether it is standard or custom.

U Series - Data Sheet

Data Sheets

English

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance

Declaration of Conformity

English

Key Attributes: Strain Gauges
Type/technology	Foil strain gauge
Application	Manufacturing transducers
Geometry	T rosette
Measuring grid length	1.6 mm, 2.5 mm
Measuring grid length	0.063 in, 0.098 in
Measuring grid width	3.1 mm, 1.8 mm
Measuring grid width	0.122 in, 0.071 in
Carrier length	6.6 mm
Carrier length	0.26 in
Carrier width	5.8 mm
Carrier width	0.228 in
Temperature range	Standard (up to 200°C)
Nominal resistance	1000 Ohms
Gauge factor (measuring grid material)	Cr-Ni alloy (ca. 2.2)
Temperature response	Aluminium (23 ppm/K; 12.8 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Integrated solder tabs
Mounting	Bondable (adhesive pre-applied)
Grid protection	Covered

Product Code	Description
1-P250	1-comp. adhesive P250 - 2 x 15 g
1-RMS1	Cleaning kit RMS1
K-KAB-ML	Measurement cable by the meter
1-EP310N	Hot curing 2-comp. adhesive EP310N
1-NG120	Nitrile rubber NG120