XC (T Rosette)

XC T Rosettes with 2 measuring grids and with leads

XC (T Rosette)

expand_more

chevron_left

chevron_right

The C Series strain gauges are the ideal choice for structural tests at exceptional temperature conditions. They have an enormous temperature range and measure precisely even at very low temperatures down to -269 ° C. For a good mechanical flexibility, as well as flexibility and optimum adaptation to the material to be measured, the measuring grid of the C Series consists of a chrome-nickel special alloy on a polyimide foil.

Strain gauges of the C Series have an extremely wide temperature range at a very good price-performance ratio. The strain gauges of the C Series are available with three different geometries and are used, for example, in research and development, in the automotive industry, as well as in power plants and superconductors.

Temperature range: -269 to +250 ° C
Resistance: 120 and 350 Ohm
Measuring grid lengths: 1.5 to 10 mm
Strain gauges available in 120 and 350 Ohms
Measuring grid consists of chrome-nickel special alloy, measuring grid carrier is polymide
Fast delivery for preferred strain gauge types - available from stock!

Filter

Temperature response keyboard_arrow_down
Measuring grid width keyboard_arrow_down
Measuring grid width keyboard_arrow_down
Measuring grid length keyboard_arrow_down
Measuring grid length keyboard_arrow_down
Carrier length keyboard_arrow_down
Carrier length keyboard_arrow_down
Carrier width keyboard_arrow_down
Carrier width keyboard_arrow_down

Code	Measuring grid length	Measuring grid length	Measuring grid width	Measuring grid width	Carrier length	Carrier length	Carrier width	Carrier width	Temperature response
1-XC11-1.5/350	1.5 mm	0.059 in	1.5 mm	0.059 in	6 mm	0.24 in	8.4 mm	0.33 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
1-XC11-3/350	3 mm	0.118 in	3.3 mm	0.13 in	10 mm	0.394 in	10 mm	0.394 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
1-XC11-6/350	6 mm	0.236 in	6.4 mm	0.252 in	16 mm	0.63 in	18 mm	0.709 in	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F)
1-XC13-3/350	3 mm	0.118 in	3.3 mm	0.13 in	10 mm	0.394 in	10 mm	0.394 in	Aluminium (23 ppm/K; 12.8 ppm/°F)
1-XC13-6/350	6 mm	0.236 in	6.4 mm	0.252 in	16 mm	0.63 in	18 mm	0.709 in	Aluminium (23 ppm/K; 12.8 ppm/°F)

DMS C Serie - Datasheet

Data Sheets

English

Certificates and Approvals

Strain Gauges and Accessories - Statement of Compliance

Declaration of Conformity

English

XC (T Rosette)
Type/technology	Foil strain gauge
Application	Stress Analysis / structural testing
Geometry	T rosette
Measuring grid length	1.5 mm, 6 mm, 3 mm
Measuring grid length	0.059 in, 0.236 in, 0.118 in
Measuring grid width	1.5 mm, 6.4 mm, 3.3 mm
Measuring grid width	0.059 in, 0.252 in, 0.13 in
Carrier length	6 mm, 16 mm, 10 mm
Carrier length	0.24 in, 0.63 in, 0.394 in
Carrier width	8.4 mm, 18 mm, 10 mm
Carrier width	0.33 in, 0.709 in, 0.394 in
Temperature range	Cryogenic
Nominal resistance	350 Ohms
Gauge factor (measuring grid material)	Cr-Ni alloy (ca. 2.2)
Temperature response	Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F)
Maximum elongation	Standard
Fatigue life	Standard
Connection configuration	Leads
Mounting	Bondable
Grid protection	Covered

List of accessories available for all variants of this family

Product Code	Description
1-CA80	Cyanoacrylate adhesive (CA80) - 10 mL
1-EP310N	Hot curing 2-comp. adhesive EP310N
1-X280	2-comp. adhesive X280-6 x 10 g
1-NG120	Nitrile rubber NG120
1-SG250	Silicone covering SG250
1-RMS1	Cleaning kit RMS1
K-KAB-ML	Measurement cable by the meter