Main Menu

See All Acoustic End-of-Line Test Systems See All DAQ and instruments See All Electroacoustics See All Software See All Transducers See All Vibration Testing Equipment See All Academy See All Resource Center See All Applications See All Industries See All Insights See All Services See All Support See All Our Business See All Our History See All Our Sustainability Commitment See All Global Presence

Main Menu

See All Actuators See All Combustion Engines See All Durability See All eDrive See All Production Testing Sensors See All Transmission & Gearboxes See All Turbo Charger See All Industrial electronics See All S&V Signal conditioner See All DAQ Systems See All Power Analyser See All S&V Hand-held devices See All High Precision and Calibration Systems See All Test Solutions See All nCode - Durability and Fatigue Analysis See All ReliaSoft - Reliability Analysis and Management See All Test Data Management See All DAQ Software See All Drivers & API See All Utility See All Vibration Control See All Acoustic See All Current / voltage See All Displacement See All Load Cells See All Pressure See All Strain Gauges See All Vibration See All Torque See All LDS Shaker Systems See All Vibration Controllers See All Power Amplifiers See All Accessories for Vibration Testing Equipment See All Training Courses See All Acoustics See All Asset & Process Monitoring See All Custom Sensors See All Data Acquisition & Analysis See All Durability & Fatigue See All Electric Power Testing See All NVH See All Reliability See All Smart Sensors See All Vibration See All Weighing See All Automotive & Ground Transportation See All Calibration See All Installation, Maintenance & Repair See All Support Brüel & Kjær See All Release Notes See All Compliance See All Our People

Main Menu

See All QuantumX See All LAN-XI See All SomatXR See All MGCplus See All CANHEAD See All Optical Interrogators See All GenHS See All API See All Microphone Cartridges See All Microphone Sets See All Microphone Pre-amplifiers See All Sound Sources See All Acoustic Calibrators See All Special Microphones See All Accessories for acoustic transducers See All Experimental testing See All Transducer Manufacturing (OEM) See All CCLD (IEPE) accelerometers See All Charge Accelerometers See All Rotating See All Non-rotating (calibration) See All Electroacoustics See All Noise Source Identification See All Environmental Noise See All Sound Power and Sound Pressure See All Noise Certification See All Industrial Process Control See All Structural Health Monitoring See All Electrical Devices Testing See All Electrical Systems Testing See All Grid Testing See All High-Voltage Testing See All Vibration Testing with Electrodynamic Shakers See All Structural Dynamics See All Machine Analysis and Diagnostics See All Dynamic Weighing See All Calibration Services for Transducers See All Calibration Services for Handheld Instruments See All Calibration Services for Instruments & DAQ See All On-Site Calibration See All Resources See All Software License Management

Why do you do what you do?

I want to make a difference for people and my job gives me the perfect opportunity to do just that. In my research programme, I want to create technologies that help engineers solve challenging new problems, do things that have never been done before, or understand things that they previously couldn’t understand, such as non-linear vibration or rotating machinery. I like teaching because I get to interact with students when they are at a crossroads in their lives, deciding what they will be and what contribution they will make to the world. I want to inspire them to aim higher – to tackle difficult concepts, learn new things, and be good people.

“I like teaching because I get to interact with students when they are at a crossroads in their lives, deciding what they will be and what contribution they will make to the world.” Matt Allen Associate Professor, Engineering Physics Department, University of Wisconsin

knowledge, resource center, articles, dynamic problem solver

What are the unique challenges you face in your work?

Trying to solve extremely difficult problems in non-linear dynamics, problems that others have worked on for years and not solved, by bringing together new methods to tackle these problems.

Matt Allen

Company and Job Title: Associate Professor, Engineering Physics Department, University of Wisconsin

Location: Madison

2001 – 2005: PhD/MS in Mechanical Engineering, Georgia Institute of Technology

1994 – 1995,1998 – 2001: BS in Mechanical Engineering: Magna Cum Laude, Brigham Young University

Previous Jobs
2005 – 2006: Postdoctoral Appointee, Sandia National Laboratories
2000 – 2001: Patterned fibre composites/New Revolution Golf, carbon fibre composite test and design engineer.


knowledge, resource center, articles, dynamic problem solver

In his free time, Prof. Allen enjoys downhill skiing, hiking, mountain biking and he recently took up small boat sailing.

What are the most challenging things about what you do?

Research is extremely difficult. We are competing with brilliant people all over the world to be the first to solve hard problems. But when we succeed it is really rewarding. For example, I began working on non-linearities due to bolted joints 10 years ago. We would try to simulate basic finite element models with bolted joints and the computations took a long time, even on a computer cluster. When the simulations were finally done, we found that the response looked a lot like that of a linear system. Now, 10 years later, we have methods that exploit the quasi-linearity of these systems to estimate the dynamic response in fractions of a second. We can now thoroughly probe these models to understand how the joints may affect a structure.

Similarly, in 2006, we began to revisit substructuring methods that had been proposed since the 1960s as a way to experimentally model substructures and combine experimental models with finite element models. We found a new way of coupling subcomponents that made them much more robust to measurement errors and allowed us to couple subcomponents even when the interface between them was continuous.

This is now called the transmission simulator method and is beginning to be used by researchers all over the US and Europe.

What is your greatest achievement and why?

Perhaps the transmission simulator method mentioned above – it has had the broadest impact so far on the community. The method of “quasi-static modal analysis” (mentioned above for joints) is also becoming significant.

But the highest satisfaction comes from my interactions with students and seeing them go on to do great things. That isn’t really my achievement but theirs.

Any personal ambitions?

Yes, tons! There is still so little we can do to experimentally probe and understand non-linear systems. There are some good methods, but all are limited to certain types of systems and none is all that effective for the common non-linearities that we encounter in industry. The same could be said for simulation of non-linear systems. Methods exist but they are slow (computationally expensive) and don’t provide the insight that we’d like.

What are the best and worst decisions you have ever made?

Best: marrying my wife and having two children, accepting a post-doc position at Sandia and accepting a job at UW-Madison. Worst: saying yes to far too many things!

What’s your latest project?

Bolted joints (see below) and a project on non-linearities of aircraft skin panels.

knowledge, resource center, articles, dynamic problem solver

Tell us a bit about your work with NASA’s Loads and Dynamics technical team at the NASA Engineering & Safety Center.

I am part of an oversight team that considers all the testing and analysis that is done for the new space launch system and other programmes. We seek to assure that the best methods are being used and that work is done well, so we can assure the safety of astronauts and the success of the programme. I interact with some of the most brilliant aerospace engineers in the world and have enjoyed seeing how they think about difficult problems regarding loads and the linear and non-linear dynamics of launch vehicles.

The most recent IMAC tagline was, “It’s not just modal anymore”. What are the trends in tools, test methods, and simulation now and in the future?

I think that being able to address non-linearity is big. Most people don’t believe that modes exist for non-linear systems, but we’ve found this concept to be really useful. I think that modal analysis – test, analysis, etc., continues to be a big challenge in industry. Non-linear simulation is becoming much more commonplace – we need corresponding test methods and to really understand what non-linear simulation means for a design. We can collect far more information – high spatial resolution with LDV or DIC – and we need to know how to really use this more effectively to answer important questions.