arrow_back_ios

Main Menu

See All Acoustic End-of-Line Test Systems See All DAQ and instruments See All Electroacoustics See All Software See All Transducers See All Vibration Testing Equipment See All Academy See All Resource Center See All Applications See All Industries See All Insights See All Services See All Support See All Our Business See All Our History See All Our Sustainability Commitment See All Global Presence
arrow_back_ios

Main Menu

See All Actuators See All Combustion Engines See All Durability See All eDrive See All Production Testing Sensors See All Transmission & Gearboxes See All Turbo Charger See All Industrial electronics See All S&V Signal conditioner See All DAQ Systems See All Power Analyser See All S&V Hand-held devices See All High Precision and Calibration Systems See All Test Solutions See All nCode - Durability and Fatigue Analysis See All ReliaSoft - Reliability Analysis and Management See All Test Data Management See All DAQ Software See All Drivers & API See All Utility See All Vibration Control See All Acoustic See All Current / voltage See All Displacement See All Load Cells See All Pressure See All Strain Gauges See All Vibration See All Torque See All LDS Shaker Systems See All Vibration Controllers See All Power Amplifiers See All Accessories for Vibration Testing Equipment See All Training Courses See All Acoustics See All Asset & Process Monitoring See All Custom Sensors See All Data Acquisition & Analysis See All Durability & Fatigue See All Electric Power Testing See All NVH See All Reliability See All Smart Sensors See All Vibration See All Weighing See All Automotive & Ground Transportation See All Calibration See All Installation, Maintenance & Repair See All Support Brüel & Kjær See All Release Notes See All Compliance See All Our People
arrow_back_ios

Main Menu

See All QuantumX See All LAN-XI See All SomatXR See All MGCplus See All CANHEAD See All Optical Interrogators See All GenHS See All API See All Microphone Cartridges See All Microphone Sets See All Microphone Pre-amplifiers See All Sound Sources See All Acoustic Calibrators See All Special Microphones See All Accessories for acoustic transducers See All Experimental testing See All Transducer Manufacturing (OEM) See All CCLD (IEPE) accelerometers See All Charge Accelerometers See All Rotating See All Non-rotating (calibration) See All Electroacoustics See All Noise Source Identification See All Environmental Noise See All Sound Power and Sound Pressure See All Noise Certification See All Industrial Process Control See All Structural Health Monitoring See All Electrical Devices Testing See All Electrical Systems Testing See All Grid Testing See All High-Voltage Testing See All Vibration Testing with Electrodynamic Shakers See All Structural Dynamics See All Machine Analysis and Diagnostics See All Dynamic Weighing See All Calibration Services for Transducers See All Calibration Services for Handheld Instruments See All Calibration Services for Instruments & DAQ See All On-Site Calibration See All Resources See All Software License Management

Metadata for Data Management and Data Sharing

Getting fast and quality results highly depends on you being able to find the data you need, share and access it - without the use of a database. Even greatly organized projects, can get messy. With BK Connect we take Data Management to the next level with Metadata and Team Server.

Data Management With Metadata

 

Using the Results Matrix Viewer and Data Table Viewer gives you unique ways of making the data comparisons required to make fast and accurate decisions based on your data.

However, this makes one critical assumption, that you can find your data.

 

Metadata, Metadata, Metadata!

That is where metadata comes in. Metadata is the data about your data. Metadata tells the rest of the story by providing the user-definable details to help make sense of the processed data.

Metadata includes information that can be used in the legend of the graph to distinguish one trace from another and it gives you attributes that can be used to search for your data. You can use as many or as few fields that make sense for the type of measurements and processing you are doing.

 

Metadata is not a new concept. We all use at least one metadata field every time we save a document or a PowerPoint® presentation, that is the file name. We typically try to be creative and give the file a name that will be obvious to us in the future when we look for it and we place it in a folder that we will certainly remember. If you are anything like me, this one metadata field is just not enough. I spend far more time than I should looking for files, opening and closing presentations until I find what I want.

This is also how we treat our data. Using metadata, we now have access to unlimited numbers of attributes that we can use to help us find the correct data when we need it. Why is this important? Because data has life after the test is complete. You may need to find a set of measurements that you took yesterday, or last week or even last year. If you spend a lot of time hunting for your data or, worse still, cannot find the data and have to re-measure, that is frustrating. This frustration may not occur every day, but when it does it feels awful.

Metadata can help save you from this pain. Documenting your data with attributes you have identified as important for using in Legends and tables, or for searching, makes your valuable data even more valuable.

We were told by one customer that without metadata, the data is useless. This is a very strong statement but one I absolutely agree with. After years of being a test engineer, I can recognize this struggle and with the ability to acquire more data and perform more analysis in the age of Big Data, using the built-in metadata tools inside BK Connect might be what helps you solve your problem or meet your next design target.

With BK Connect, you will be able to predefine metadata as a text file and load the text file before the recording, so there will be no need to type the information when time is most critical.

Fan speed and hairdryer name as Display Legend
Customer name, operator and test location in the metadata table

 

So far we discussed how using metadata to document your tests and using the Result Matrix Viewer to organize data into displays helping you make decisions. This works well for individual users who can easily lay hands on their data, but what if you need to find data from an old, half-forgotten project, or you need data from others in your team?

 

Sharing Data? No Database Required!

 

With the BK Connect® we introduced a new concept for sharing data. Team Server Type 8400-T-FY is a data sharing tool that allows teams to share data via the network – no database is required.

Data files are stored in a network file repository (Team Folder) set up by a system administrator.

 

BK Connect Team Server

Data is shared as files from the BK Connect Project Browser to the Team Folder, either the original time data, or the process results, or both.  Each user decides what to share with other engineers, test managers or test requesters.  Once data has been shared to the Team Folder, it is indexed automatically. The system reads the files, extracts relevant user-defined metadata and application-related data attributes and turns them into searchable results. It works for all file types importable into BK Connect, but works best with the .bkc file, which has more attributes available for indexing.

 

Collaboration and problem solving

The Team Server is designed to work with the same user access rights that already exist in your organization, for example, when sharing files via Windows® Explorer on a shared drive. Whoever has read/write access to the Team Folder can search for data within BK Connect based on any data attribute, most importantly user-defined metadata. Once the data is found it can be imported into the local project for further processing, data comparison or reporting. This opens the door to new ways of collaborating and solving problems more efficiently than before.

 

Above all, Team Server gives new life to old data. Who does not recall being asked for data they took in a past project, perhaps years ago, perhaps only last month? You have a rough idea where to find it, but how much effort will it take? How much time can you afford to spend before you give up, fearing it could take hours of browsing through old folders and projects, and wondering whether the data you eventually find will answer the question at all?

Team Server makes legacy data instantly searchable, however old it is. Terabytes of old project data come back to life. It’s so quick to find data that it opens new possibilities for experimenting with different potential uses, satisfying curiosity instead of being left wondering or, still worse, being forced to go out and take new data.

 

BK Connect Data Viewer

To make things easy, Team Server is accessed via a floating licence server installed on the Team Server itself, so no local licence is required. When used with the a FREE 6 months licee of Data Viewncer  you have true team collaboration across all members of the team.

 

Learn more: 
Data ManagementBK Connect


Jason Kunio, Product Manager, BK Connect


GO BACK: THE DATA ACQUISITION AND ANALYSIS BLOG

BK Connect Tutorial

VIDEO TUTORIAL:

How to save properties and display favourites

Metadata can be attributes such as which test cell was used, who took the data, what was the speed of the motor, what was the temperature of the environment and so on. These fields are user definable.

BK Connect Tutorial