P2VA1/2000BAR

Pressure transducer P2VA1/2000bar

Pressure transmitter P2VA1,
Measuring range: 0...2000 bar,
Measuring system: measurement by strain gauge 350 Ohm,
Accuracy class: 0.3,
Output Signal: 0,5...10V,
Supply voltage: 24 V (15...30 V),
Cut off frequency: 4.5 kHz (-3dB),
connector: plug M12x1 / 5-pole,
Monolithic measuring body,
Transmitter made by 1.4542,
Sealing made by 1.4301,
Degree of protection: IP67,
TEDS integrated,
A 5 m long PUR connection cable (1-KAB166-5) is included in the scope of
supply

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

P2VA1 and P2VA2 Pressure Transmitters: Measurement with an Accuracy Class of 0.3

The P2VA1 and P2VA2 pressure transmitters can measure pressure that amounts to 5,000 bar with an accuracy class of 0.3. They are equipped with HBK’s high-grade strain-gauge technology and are ideally suited for dynamic and static measurement tasks in the industry; for instance, in water-jet cutting, high-pressure forming, or isostatic presses. The P2VA1 and P2VA2 come with an integrated amplifier. Thus, these can be directly utilized for industrial process control, without the requirement of any additional measurement electronics. Owing to their corrosion-proof, robust, one-piece stainless-steel measuring body, the pressure transmitters have permanent resistance against chemically demanding environments; for instance, in test-bench applications of the petrochemical industry.

The pressure transmitters facilitate immediate use, as they have an automatic measuring point identification enabled by TEDS. Two selectable signal outputs, volt with the P2VA1 or milliampere with the P2VA2, enable easy integration with the existing measurement systems.

A special feature offered by the transmitters is “live zero”: 0 bar pressure is presented as 0.5 V or 4 mA; if a smaller value is measured in the control system, an error is detected, and the system can be shut down safely.

The P2VA1 and P2VA2 have eight nominal (rated) pressure options, which makes them the first choice for many industrial applications.

Versatile use

Accurate measurement, attributed to the accuracy class of 0.3
Equipped with a high-grade, low-noise amplifier
Suitable for static and dynamic measurements due to the use of strain-gauge technology
Available with an output in volt or milliampere

Ideal for demanding measurement tasks from the proven HBK strain-gauge technology

Safe for use

Robust, monolithic stainless-steel measuring body
Corrosion-resistant, even in a chemical-exposed and humid environment
Integrated function test through “live zero”
Withstands loads of up to 1.5 times its nominal (rated) pressure
Resistant to permanent humidity and dirt owing to its IP67 degree of protection
Shock-proof for applications with vibrations (in compliance with DIN IEC68)

Reliable and resistant thanks to its stainless stainless-steel measuring body and convenient function test

Easy integration

Five nominal (rated) pressure ranges are available: 500 bar, 1,000 bar, 2,000 bar, 3,000 bar, 5,000 bar
Ready for immediate use, with TEDS automatic sensor identification
Standardized 5-pin M12 plug and connection thread with G1/4 external thread or M16 x 1.5 internal thread (from 3,000 bar upwards)
Available with 5-m or 20-m connection cable and many other accessories

Ready for use quickly owing to the integrated amplifier and TEDS technology

P2VA1, P2VA2 - Data Sheet	Data Sheets	English
P2V - Mounting Instructions	Mounting Instructions	English, French, German

Certificates and Approvals

P2VA1/P2VA2 - EU Declaration of Conformity

Declaration of Conformity

English

Key Attributes: Pressure Transducers
Application	Industrial
Measurement range	2000 bar
Measurement range	29008 psi
Accuracy class	0.3
Electrical connection	Plug
Output signal	Passive [mV/V], Current (4-20mA)
Measurement principle	Absolute pressure
Length	70 mm
Length	2.76 in
Diameter	30 mm
Diameter	1.18 in
Minimum Temperature	-20 °C
Maximum Temperature	85 °C
Minimum Temperature	-4 °F
Maximum Temperature	185 °F
Degree of protection	IP67

Product Code	Description
2-9278.0371	Packet, cone seal set P2V/100-2000bar
1-ADAPT.G1/4-M20	Connection adapter for P2V G1/4 to M20
1-KAB166-20	Connection cable for P2V, PUR, 20m
1-ADAPT.G1/4-G1/2	Connection adapter for P2V G1/4 to G1/2