arrow_back_ios

Main Menu

See All Acoustic End-of-Line Test Systems See All DAQ and instruments See All Electroacoustics See All Software See All Transducers See All Vibration Testing Equipment See All Academy See All Resource Center See All Applications See All Industries See All Insights See All Services See All Support See All Our Business See All Our History See All Our Sustainability Commitment See All Global Presence
arrow_back_ios

Main Menu

See All Actuators See All Combustion Engines See All Durability See All eDrive See All Production Testing Sensors See All Transmission & Gearboxes See All Turbo Charger See All DAQ Systems See All High Precision and Calibration Systems See All Industrial electronics See All Power Analyser See All S&V Hand-held devices See All S&V Signal conditioner See All Test Solutions See All DAQ Software See All Drivers & API See All nCode - Durability and Fatigue Analysis See All ReliaSoft - Reliability Analysis and Management See All Test Data Management See All Utility See All Vibration Control See All Acoustic See All Current / voltage See All Displacement See All Load Cells See All Pressure See All Strain Gauges See All Torque See All Vibration See All Accessories for Vibration Testing Equipment See All Power Amplifiers See All LDS Shaker Systems See All Vibration Controllers See All Training Courses See All Acoustics See All Asset & Process Monitoring See All Custom Sensors See All Data Acquisition & Analysis See All Durability & Fatigue See All Electric Power Testing See All NVH See All Reliability See All Smart Sensors See All Vibration See All Weighing See All Automotive & Ground Transportation See All Calibration See All Installation, Maintenance & Repair See All Support Brüel & Kjær See All Release Notes See All Compliance See All Our People
arrow_back_ios

Main Menu

See All CANHEAD See All GenHS See All LAN-XI See All MGCplus See All Optical Interrogators See All QuantumX See All SomatXR See All BK Connect / Pulse See All API See All Microphone Sets See All Microphone Cartridges See All Acoustic Calibrators See All Special Microphones See All Microphone Pre-amplifiers See All Sound Sources See All Accessories for acoustic transducers See All Experimental testing See All Transducer Manufacturing (OEM) See All Non-rotating (calibration) See All Rotating See All CCLD (IEPE) accelerometers See All Charge Accelerometers See All Electroacoustics See All Noise Source Identification See All Environmental Noise See All Sound Power and Sound Pressure See All Noise Certification See All Industrial Process Control See All Structural Health Monitoring See All Electrical Devices Testing See All Electrical Systems Testing See All Grid Testing See All High-Voltage Testing See All Vibration Testing with Electrodynamic Shakers See All Structural Dynamics See All Machine Analysis and Diagnostics See All Dynamic Weighing See All Calibration Services for Transducers See All Calibration Services for Handheld Instruments See All Calibration Services for Instruments & DAQ See All On-Site Calibration See All Resources See All Software License Management

Industrial Amplifiers - Software and Firmware Downloads

ClipX

Title Description Date Version Related Documents
ClipX CAE data for ePLAN Electric P8 Macro-project containing CAE data for ePLAN Electric P8. 01/2018    
ClipX GSDML files (ProfiNet) ClipX device description files for ProfiNet RT and IRT. 06/2018   Release Notes
ClipX XML files (EtherCat) ClipX device description file for EtherCat. 03/2018    
ClipX GSD files (Profibus) ClipX device description files for Profibus (DPV1) 03/2018    
HBM Device discovery Java tool for finding HBM devices in Ethernet-networks even with non-configured network-settings. Unzip and copy the file to the PC and run it. All HBM devices will be shown in the network. Right mouse-click opens a menu to read and setup the device network-settings. Note: Java has to be installed on the PC. 03/2018    
ClipX EDS files (Ethernet/IP) ClipX device description for Ethernet/IP. 09/2018    
ClipX LabView-Software-Example

This example considers a simple example for data-viewing and data-storage for ClipX.

It is available as executable-file and source-code for LabView 2018.

Legal notice: The example given is intended to illustrate the integration of ClipX via Ethernet(TCP/IP) into a LabView-application.

This example does not imply any warranty or guarantee.

12/2018 1.2  
ClipX DELPHI-Software-Example

This example considers a simple example for data-viewing and setup for ClipX.

It is available as It is available as EXE-file and source-code for DELPHI XE7.

Legal notice: The example given is intended to illustrate the integration of ClipX via Ethernet(TCP/IP) into a DELPHI-application.

This example does not imply any warranty or guarantee.

12/2018 1.0  
ClipX OPC-UA Client-Server Software-Example

This example considers a simple example for OPC-UA communication with data-viewing and data-storage for ClipX.

ClipX acts as OPC-UA server and the PC application as OPC-UA client. Minimum hardware required for ClipX is version 2.0

Legal notice: The example given is intended to illustrate the integration of ClipX via Ethernet(TCP/IP) into OPC-UA-application.

This example does not imply any warranty or guarantee.

09/2019 4.1  
ClipX Universal PLC-Example

This example considers a simple demo-project, how to integrate ClipX in several plc-networks which are based on Ethernet, e.g. Modbus-TCP.

Therefore, the possibility of transmitting non-real-time data via field bus is used. These data do not interfere the fieldbus data.

Legal notice: The example given is intended to illustrate the integration of ClipX via Ethernet(TCP/IP) into a LabView-application.

This example does not imply any warranty or guarantee.

05/2019 1.0  
ClipX API-WINDOWS Library and Software-Example

This is a description of the open ClipXApi.dll with code-examples in C#, C and C++ for implementing ClipX in customized WINDOWS software applications.

The ClipX WINDOWS-API is based on a communication to the object directory of ClipX and uses its internal fifo storage.

ClipX uses a fixed sample rate of 19.2 kHz. The transfer rate of the values from ClipX to catman can be set from 0.1Hz to 1kHz.

Legal notice: This example does not imply any warranty or guarantee.

09/2019 1.1  
ClipX API-LINUX Library and Software-Example

This is a description of the open ClipXApi.dll with code-examples in C#, C and C++ for implementing ClipX in customized LINUX software applications.

The ClipX LINUX-API is based on a communication to the object directory of ClipX and uses its internal fifo storage.

ClipX uses a fixed sample rate of 19.2 kHz. The transfer rate of the values from ClipX to catman can be set from 0.1Hz to 1kHz.

Legal notice: This example does not imply any warranty or guarantee.

09/2019 1.0  
ClipX Parameter Set Reader This service-tool visualizes, transfers and stores parameter settings from a ClipX compressed parameter-set file in a txt-file. Legal notice: The tool do not imply any warranty or guarantee 12/2019 1.2  
ClipX EDS-file-creator for Ethernet/IP

The tool reads the current configuration and the user-defined channel names from the ClipX and writes them to the .eds file.

Even if the configuration is individual, ClipX inserts all the channels that can be added as parameters in the file,

so that when the configuration is changed in ClipX, they can be taken over in the PLC software without creating a new .eds file.

08/2020 1.0  
ClipX Firmware and WebServer

Archive including all current files for firmware and ClipX WebServer.

To update firmware and WebServer the existing WebServer in the ClipX can be used (no additional software or hardware needed).

10/2021 3.2.0  

PMX

Title Description Date Version Related Documents
PMX Firmware and WebServer

Archive including all current files for firmware and PMX WebServer.

To update firmware and WebServer the existing WebServer in the PMX can be used (no additional software or hardware needed).

Note: Please unzip the PMX-firmware download-file to get a .tgz file, which than directly can be uploaded into PMX via the PMX-webserver (menu: Firmware update in the admin level).

06/2021 4.6 Release Notes
catman Easy / AP / PostProcess Software for data acquisition, visualization, analysis and reporting of measurement data for your PC or QuantumX/SomatXR Data Recorder. 03/2023 5.6.1 Release Notes
HBM Common API 6.2

The HBM Common API enables users to develop their own PC software application, integrating DAQ systems like QuantumX, SomatXR, PMX and MGCplus.

The download includes the free of charge API as well as documentation and example programs in C#.

01/2022 6.2 Release Notes
HBM Device Manager The HBM Device Manager is a service tool to scan the network for available HBM devices. 12/2019 2.0 Release Notes
HBM DIAdem Driver The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in DIAdem (32 and 64 Bit). Only available in German language. Please see the Release Note for further details and requirements. The download can be used 30 days as trial. To unlock the license, a license key must be purchased. 05/2020 1.2.1 Release Notes
HBM LabVIEW Driver 32-bit The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in LabVIEW. Please see the Release Notes for further details and requirements. The download can be used 30 days as trial. To unlock the license, a license key must be purchased. 02/2021 4.0 Release Notes
HBM LabVIEW Driver 64-bit The driver allows to integrate QuantumX, SomatXR, PMX and MGCplus in LabVIEW. Please see the Release Notes for further details and requirements. The download can be used 30 days as trial. To unlock the license, a license key must be purchased. 02/2021 4.0 Release Notes
PMX CAE data for ePLAN Electric P8 Macro-project containing CAE data for ePLAN Electric P8. 06/2018 2.00  
PMX Codesys Examples

This is a collection of Codesys software achives for typical requirements around PMX.
They show a step-by-step solution up to the running project in Codesys and PMX.

Available languages: german, english.

  • PMX Web-visualisation
  • PMX in CAN-Master and -Slave mode
  • PMX with CAN-modules for temperature and climate measurements
  • PMX with Client-Server communication via TCP/IP
  • PMX with integrated data-storage on internal memory or USB-stick
  • Pressmonitoring
  • Windmeter integration
  • Extending PMX with ClipX modules
  • Test-profiles import via Excel

Legal notice: The examples given are intended to illustrate the solution and integration into PMX.

The examples do not imply any warranty or guarantee.

05/2019 4.0  
PMX CodesysV3 Archive including all current files for CodeysV3.5SP7 software installation and PMX-Package V3.5.7.10 03/2016 1.03
PMX EDS files (Ethernet/IP) PMX device description file for Ethernet/IP. 02/2015 0.24  
PMX Example EtherCat Project This example considers a simple test assembly including a Beckhoff PLC CX1020 and a PMX. In this example, consistent (coherent) data are written and read via the EtherCat and shown is a visualization panel. Legal notice: The example given is intended to illustrate the integration of PMX into Beckhoff TwinCat software via EtherCat. This example does not imply any warranty or guarantee. 04/2014    
 PMX Example Ethernet/IP Project

This example considers a simple test assembly including a AlanBradley PLC Compact Logix L24ER and a PMX.

In this example, consistent (coherent) data are written and read via the Ethernet/IP.

Legal notice: The example given is intended to illustrate the integration of PMX into AlanBradley's software RSLogix 5000 via Ethernet/IP.

This example does not imply any warranty or guarantee.

04/2014    
PMX Example Profinet Project

This example considers a simple test assembly including a Siemens CPU315-2 PN DP and a PMX.

In this example, consistent (coherent) data are written and read via the Profinet.

Legal notice: The example given is intended to illustrate the integration of PMX into Siemens' Step7 software via Profinet.

This example does not imply any warranty or guarantee.

04/2014    
PMX GSDML files (ProfiNet) PMX device description files for ProfiNet RT and IRT. 02/2015 2.3  
PMX Matlab Driver

The driver allows to integrate PMX into Matlab. It includes also an executable example.

Matlab has to be already installed.

This example does not imply any warranty or guarantee.

09/2019 1.0  
PMX Parameter Set Reader

This service-tool visualizes, transfers and stores parameter settings from a PMX parameter-set file in a txt-file. Legal notice: The tool do not imply any warranty or guarantee

05/2019 1.3  
PMX XML files (EtherCat) PMX device description file for EtherCat. 02/2015 1.3  

PME Series (including MP85A)

Title Description Date Version Related Documents
PME Firmware for hardware version 1.xx

For PME hardware version 1.xx (MP01-MP70) and all MP85/DP! For newer devices, please use the PME firmware for hardware version 2.xx on this page. Archive including all current firmware files for modules of the PME series. The appropriate firmware loader is part of the PME assistant. The zip file has to be extracted into the PME assistant directory. It includes following firmware versions:

  • MP01 Version 1.12
  • MP30 Version 1.04
  • MP30DP Version 1.04
  • MP55 Version 1.42
  • MP55DP Version 1.42
  • MP55DPS6 Version 1.42
  • MP60 Version 1.18
  • MP60DP Version 1.18
  • MP70DP Version 1.05
  • MP70DPS7 Version 1.05
  • MP70S7 Version 1.05
  • MP85 Version 1.10
  • MP85DP Version 1.10
05/2007 HW1  
MP85A CAE data for Eplan Electric P8 This project is a macro-project and contains CAE data for Eplan Electric P8. 08/2011 1.00  
PME Firmware for hardware version 2.xx

For PME hardware version 2.xx (MP01-MP70) and all MP85A/ADP! For older devices, please use the PME firmware for hardware version 1.xx on this page. Archive including all current firmware files for modules of the PME series. The appropriate firmware loader is part of the PME assistant. The zip file has to be extracted into the PME assistant directory. It includes following firmware versions:

  • MP01 Version 2.00
  • MP30 Version 2.02
  • MP30DP Version 2.02
  • MP55 Version 2.06
  • MP55DP Version 2.06
  • MP55DPS6 Version 2.02
  • MP60 Version 2.00
  • MP60DP Version 2.00
  • MP70DP Version 2.00
  • MP70DPS7 Version 2.00
  • MP70S7 Version 2.00
  • MP85A Version 2.38
  • MP85ADP Version 2.38
  • MP85A-S Version 2.38
  • MP85ADP-S Version 2.38
12/2016 HW2 MP85A Release note FW
PME EDS files EDS files for PME (MP01, MP30, MP55, MP60, MP85). 11/2011 1.01  
PME Profibus DP PROFIBUS DP master file for PME: (MP30DP, MP55DP, MP60DP, MP70DP, MP70DPS7,MP85MP). German version: GSD file, English version: GSE file. 07/2013 1.20  
PME CAE data for Eplan Electric P8 This project is a macro-project and contains CAE data for Eplan Electric P8. 08/2011    
Sequence for reading the curve memory via ProfibusDPV1 using Simatic Step7 The basic sequence of transmission of measured value (Float data format) from the MP85ADP curve memory via the Profibus-DP interface to a master (e.g. Siemens PLC) is shown in this file. 07/2015    
PME MP85ADP(-S) Example Project Program example to the communication of the HBM process-controller MP85 with a Siemens Siemens CPU317-2 DP:
The example of the communication with the MP85A about Ethernet please unzip recursive in the ZIP archive (relatively stored paths). The program sends and receives data by means of the functions AG_send and AG_Recv (FC5 and FC6). It are sent 10 bytes to the SPS and 14 bytes should be received again. In this project the Siemens CPU317-2 DP has the IP address 172.21.64.250. The IP address of the MP85 is 172.21.64.253 (port 4020). A description with program-code and comments is shown in the documents „OP1_MP85A_Eth-Com-CPU317-2 DP.pdf “
Legal notice: The example given is intended to illustrate the integration of the MP85ADP(-S) into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.
07/2015    
PME MP85ADP(-S) Example Project Example-Sequence to read and write consitent data as well an example to read and write the workpiece-id via Profibus-DPV1 with Siematic Step7:
This basic example shows the transmission of measuring-value and Control-word (Float data format) from the MP85ADP(-S) via Provibus-DP interface to a master (e.g. Siemens PLC). Programming is done in Step7 Siemens software using the function blocks for reading (SFC14) and writing (SFC15) MP85ADP data. Further more the example contains reading and writing the workpiece-id via the Profibus DPV1-function using the function-blocks for reading (SFB52) und writing (SFB53) to MP85ADP(-S). A description with program-code and comments is shown in the documents „OB1_DPV1_Werkstueck_de.pdf“ and „OB1_DPV1_Werkstueck_en.pdf“.
Legal notice: The example given is intended to illustrate the integration of the MP85ADP(-S) into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.
07/2010    
PME FASTpressSuite CD

PME assistant, firmware loader and USB driver (for Windows XP, Windows Vista and Windows 7/8/10) for comfortable setup and visualisation. For smooth operation of modules with CAN interfaces, use the PEAK USB-to-CAN dongle. All required drivers are included and will be installed during startup.

This download includes:

  • PME-Assistant (V3.4.R208)
  • PME-Firmware Loader (V1.1.7)
  • IPM data conversion (V1.1)
  • License-manager for MP85A-Toolkit and MP85A-Runtime (necessary for MP85A PC-applications)

... and the demo versions of:

  • EASYteach (V1.0.5.10)
  • MP85A-Toolkit (V1.0.R5.12)
  • EASYmonitor CE (V1.1.1.1)
  • INDUSTRYmonitor (V1.2.1.22)

You can start those demo versions up to 25 times for free. To buy the full licence please visit the HBM shop or ask your local HBM representative.

01/2019 1.52 Release Notes
NL51N-DPL-Gateway-DP/NP CAE data for Eplan Electric P8   This project is a macro project and contains CAE data for Eplan Electric P8.    

digiCLIP

Title Description Date Version Related Documents
digiCLIP EDS files (DeviceNet) for DF30DN and DF31DN EDS files for digiCLIP DF30DN and DF31DN. 05/2015 1.12  
digiCLIP DTM setup for DF30DP and DF31DP

Contains the installation of the DeviceDTM in German and English for Windows 2000/XP/Vista/7/8/10 operating systems.

Prerequisite for using digiCLIP DTM setup is the installation of a frame application (e.g. FDT container, PACTware) - not included in this download.

12/2010 1.2.0.166 Release Notes
GSD/GSE files for digiCLIP DF30 and DF31 GSE/GSD files for digiCLIP DF30DP and DF31DP. 12/2012 1.34  
digiCLIP CAE data for Eplan Electric P8 This project is a macro-project and contains CAE data for Eplan Electric P8. 08/2011 1.00  
digiCLIP EDS files (CAN) for DF30CAN and DF31CAN EDS files for digiCLIP DF30CAN and DF31CAN. 06/2014 1.36 / 1.20  
digiCLIP Example on a CANOpen application This applicatin is to describe an example of a small-scale digiCLIP amplifier application in a CAN network using a CANopen based PLC. In this application, load cells implemented as strain gage full bridges are used for determining the filling level in a tank and taring it to 0 ... 100% using a PLC connected to the digiCLIP. This example does not imply any warranty or guarantee. 07/2015    
digiCLIP Example DeviceNet Project (Omron PLC) The CX-Integrator example program shows the basic test setup of a digiCLIP DF31DN connected to an Omron Sysmac CJ1M SPS with a CS1/CJ1 DRM21 fieldbus controller. In this example, consistent (coherent) data is read and written over the DeviceNet. The DF30DN operating manual provides all possible commands and values. This example does not imply any warranty or guarantee. 07/2015    
digiCLIP Example Profibus Project

This example considers a simple test assembly including a Siemens CPU313-2DP and a DF30DP/DF31DP (digiclip). In this example, consistent (coherent) data are written and read via the Profibus with SFC14 and SFC15. As an additonal programming the parametercontainer is programmed to configure the DF30DP in the cyclic data exchange. To read configurations with DPV1 the Siemens function block SFB52 (PNO AK1131)is programmed, too. All commands and values for the configuration are shown in the official manual.

Legal notice: The example given is intended to illustrate the integration of the DF30DP into Siemens' Step7 software via Profibus. This example does not imply any warranty or guarantee.

07/2015    
digiCLIP Firmware for DF30 and DF31

Archive including all current firmware files for modules of the digiCLIP series. The appropriate firmware loader is part of the digiCLIP assistant. The zip file has to be extracted into the digiCLIP assistant download directory.

DF30CAN version 1.44
DF31CAN version 1.28

DF30DP version 1.42
DF31DP version 1.28

DF30DN version 1.12
DF31DN version 1.12

05/2015   Release Notes
digiCLIP Assistant

digiCLIP Assistant, Firmware Loader and USB Driver (for Windows XP, Windows Vista and Windows 7/8/10) for easy setup of digiCLIP modules and for visualization.

For smooth operation of modules with CAN and DeviceNet interfaces, use the PEAK USB-to-CAN dongle.

For Profibus operation Hilscher and Siemens CP5511/12 and CP5711 is supported - to handle digiCLIP firmware-updates via CP5711 digiCLIP-modules have to be equipped with a adapted bootloader which is implemented starting with following serial-numbers: (DF30DP: 816711801 / DF31DP: 817427801).

All required drivers are included and will be installed during startup.

04/2016 2.6.5 Release Notes

Clip

Title Description Date Version Related Documents
Clip CAE data for Eplan Electric P8 This project is a macro-project and contains CAE data for Eplan Electric P8. 03/2012 1.00  

MGA II

Title Description Date Version Related Documents
MGA II CAE data for Eplan Electric P8 This project is a macro-project and contains CAE data for Eplan Electric P8. 03/2012 1.00  

PACEline CMD

Title Description Date Version Related Documents
CMA/CMD CAE data for Eplan Electric P8 This project is a macro-project and contains CAE data for Eplan Electric P8. 10/2011 1.00  
CMD Assistant

CMD Assistant and Firmware Loader for Windows 2000, XP, Vista, 7/8/10. Allows the easy setup of CMD modules, visualization and process-data storage. All required drivers are included and will be installed during startup.

Starting with assistant-version 1.2.4.0 only CMD with firmware 3.0 and higher can be used. Devices with firmware 2.9 and lower are shown in the device-scan but marked red with a note for firmware-update. Please do also a firmware-update for those devices, for features see release-notes.

03/2016 1.3.0.2 Release Notes
CMD Firmware Archive including all current firmware for all modules of the CMD series (CMD600 and CMD2000).
Please use "CMD Firmware Updater for Version 3.62 and higher" on this page.
03/2016 3.74 Release Notes
CMD LabView driver and example project

To simplify the use of CMD meauring amplifier a complete support for communication in form of a Labview driver is available, respectively Labview programs/subroutines called virtual instruments (VIs).
The purpose of this document is to explain in detail all aspects of the Labview CMD driver:

  • Driver structure
  • VI blocks
  • Application example – getting started

The CMD driver is completely written in Labview Professional Development System. In order to use the drivers the user will need Labview version 9.0.1 or later.
This example does not imply any warranty or guarantee.

07/2015    
CMD Siemens Profinet integation example project

This is an instruction for using a CMD charge amplifier with a Siemens 1200 controller in a Profinet network.

It shows how to stream data via UDP from the charge amplifier to the controller via UDP with up to 1000 Hz and send a command via TCP.

This non-real-time communication can be performed simultaneously to an existing real-time ProfiNet connection over the same line.

Communication is done with program blocks, which are enclosed with the technote in the .scl file.

 

HBM does not guarantee the completeness and correctness of this example.

07/2019    

MVD and MVD SCOUT55

Title Description Date Version Related Documents
MVD CAE data for Eplan Electric P8 This project is a macro-project and contains CAE data for Eplan Electric P8. 03/2012 1.00  
MVD Scout Assistant System-CD for MVD2555 and SCOUT55. 09/2008 2.2  
TechNotes

This is a collection of technical application reports for requirements around MVD2555 and Scout55.

They show a step-by-step solution up to the running project.

Available languages: English and German

  • MVD2555/Scout55 saving parameters with MVD/Scout-Assistant
  • MVD2555/Scout55 saving parameters on the ext. module XM001

Legal notice: The examples given are intended to illustrate the solution and integration into ClipX.

The examples do not imply any warranty or guarantee.

     

Related Products

No more result to load