EDRV-6P-2T

EDRIVE PWR ANALYZER, 6CH, 2MS/s, GEN2tB

6 channel eDrive POWER ANALYZER GEN2tB:
The POWER ANALYZER is a PC connected front end for testing inverter driven electrical machines and
components. The PC then can display power results
in real time, store results and raw data and analyze stored data in post process. The power analyzer offers 6 power channels (6 voltage & 6 current) and 4 frequency inputs for torque/speed sensors.
It consists of:
1 x GEN2tB mainframe with 2 slots (all used)
2 x GN310B input cards with 3 power channels each
1 x Perception Enterprise software with eDrive option
1 x Torque/Speed connection/splitter box
1 x 3ph artificial star adapter
1 x SSD local drive
*** mainframe ***
1 x GEN2tB tethered mainframe:
- 2 acquisitions slots
- portable use or rack mountable
- 1 GBit Ethernet, PTPv2.0, 100 MB/s
- up to 32 digital events and 4 T/C channels
- Master/Sync port (needs SFP)
- optical 1 GBit Ethernet port (needs SFP)
- status display for system info
- internal SSD: 500 GB, 200 MB/s
*** input cards ***
2 x GN310B power analyzer card
- 3 power channels (voltage & current)
- 2 MS/s, 18 bit, 2 GB RAM
- voltage inputs ranges (5): ±50V to ±1500V DC,
1000V CAT IV, 1200V DC CAT IV, 1500V DC CAT III
- current inputs ranges (7): ±75mA to ±2A or
current clamp usage: ±5mV to ±20V
- 16 digital events and two counter / timer inputs
*** software included ***
- Perception Enterprise software with eDrive option
- for setting up the system including user defined formulas, real time display of power results (numerical / trends / Polar) and raw data (scope/FFT) and post processing of stored data.
***options (factory installed, order seperately)***
- SFP modules for:
* optical Master/Sync
* optical 1 GBit Ethernet SFP module
- CAN FD/CAN 2.0 in/out/acquisition control

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

Perception eDrive option - Data Sheet

Data Sheets

English

Sales documents

eDrive Power Analyzer Family Overview - Brochure

Brochure

English

Product Code	Description
1-CTS200ID	CURRENT TRANSDUCER 200A RMS
1-CTS400ID	CURRENT TRANSDUCER 400A RMS
1-CTS50ID	CURRENT TRANSDUCER 50A RMS
1-CTS600ID	CURRENT TRANSDUCER 600A RMS
1-CTPSIU-6-1U	6 CHN CURRENT TRANSDUCER INTERFACE
1-KAB2132-0.5	GEN DAQ I/O BREAK OUT CABLE
1-KAB2133-10	Current transducer connection cable 10 m
1-KAB2133-15	Current transducer connection cable 15 m
1-KAB2133-2	Current transducer connection cable 2 m
1-KAB2133-5	Current transducer connection cable 5 m
1-KAB2134-2	GN31XB-CTPSIU 2M LEMO-XLR CABLE
1-KAB2136-1	GN31XB 1M LEMO-BANANA VOLT&CURRENT CBL
1-KAB2137-2	GN31XB 2M LEMO-BNC VOLTAGE INPUT CABLE
1-KAB2138-3	GN31XB 3M LEMO-PIGTAIL VOLT&CURRENT CBL
1-KAB2139-12	3 PHASE SHIELDED CBL 1500VDC CATIII 12m
1-KAB2139-3	3 PHASE SHIELDED CBL 1500VDC CATIII 3m
1-KAB2139-6	3 PHASE SHIELDED CBL 1500VDC CATIII 6 m
1-KAB280-10	Fiberoptic Cable MM 50/125um 10m LC-LC
1-KAB288	Fiberoptic Cable SM 9/125um 2m LC-LC
1-KAB289-20	Fiberoptic cable for 7600,20m,heavy duty
1-3PH-STR-1K0-CAT2	3 PH ARTIFICIAL STAR ADAPTER 1KV CAT2
1-G063	1 Gbit Ethernet SFP, 1310nm single mode
1-G091	2 Gbit Optical Receiver SFP, 850nm, MM
1-CARRYBAG-GEN2TB	Carry bag with shoulder strap for GEN2tB
1-G001B	IRIG to PTP gateway for GEN DAQ
1-G093	GEN2tB 19inch Rack Mount Kit
1-G095	GEN2tB air filter replacement
1-G098	GEN2tB hardcover shipping case
1-USB-CANFD-1CHN	USB to 1 CAN/CANFD channel convertor
1-4C-PCIE-CANFD-2T	4 CH CAN/CANFD option for GEN2tB
1-G081	GHS Card, Option Carrier Card
1-G082	EtherCAT option for 1-G081
1-G083	Master output option for 1-G081
1-G002B	GPS antenna to PTP system for GEN DAQ
1-G072	Isolated Event/Timer/Counter adapter
1-KAB2139-1.5	3 PHASE SHIELDED CBL 1500VDC CATIII 1.5m