Main Menu

See All Acoustic End-of-Line Test Systems See All DAQ and instruments See All Electroacoustics See All Software See All Transducers See All Vibration Testing Equipment See All Academy See All Resource Center See All Applications See All Industries See All Insights See All Services See All Support See All Our Business See All Our History See All Our Sustainability Commitment See All Global Presence

Main Menu

See All Actuators See All Combustion Engines See All Durability See All eDrive See All Production Testing Sensors See All Transmission & Gearboxes See All Turbo Charger See All Industrial electronics See All S&V Signal conditioner See All DAQ Systems See All Power Analyser See All S&V Hand-held devices See All High Precision and Calibration Systems See All Test Solutions See All nCode - Durability and Fatigue Analysis See All ReliaSoft - Reliability Analysis and Management See All Test Data Management See All DAQ Software See All Drivers & API See All Utility See All Vibration Control See All Acoustic See All Current / voltage See All Displacement See All Load Cells See All Pressure See All Strain Gauges See All Vibration See All Torque See All LDS Shaker Systems See All Vibration Controllers See All Power Amplifiers See All Accessories for Vibration Testing Equipment See All Training Courses See All Acoustics See All Asset & Process Monitoring See All Custom Sensors See All Data Acquisition & Analysis See All Durability & Fatigue See All Electric Power Testing See All NVH See All Reliability See All Smart Sensors See All Vibration See All Weighing See All Automotive & Ground Transportation See All Calibration See All Installation, Maintenance & Repair See All Support Brüel & Kjær See All Release Notes See All Compliance See All Our People

Main Menu

See All QuantumX See All LAN-XI See All SomatXR See All MGCplus See All CANHEAD See All Optical Interrogators See All GenHS See All API See All Microphone Cartridges See All Microphone Sets See All Microphone Pre-amplifiers See All Sound Sources See All Acoustic Calibrators See All Special Microphones See All Accessories for acoustic transducers See All Experimental testing See All Transducer Manufacturing (OEM) See All CCLD (IEPE) accelerometers See All Charge Accelerometers See All Rotating See All Non-rotating (calibration) See All Electroacoustics See All Noise Source Identification See All Environmental Noise See All Sound Power and Sound Pressure See All Noise Certification See All Industrial Process Control See All Structural Health Monitoring See All Electrical Devices Testing See All Electrical Systems Testing See All Grid Testing See All High-Voltage Testing See All Vibration Testing with Electrodynamic Shakers See All Structural Dynamics See All Machine Analysis and Diagnostics See All Dynamic Weighing See All Calibration Services for Transducers See All Calibration Services for Handheld Instruments See All Calibration Services for Instruments & DAQ See All On-Site Calibration See All Resources See All Software License Management

Sounds Like a Ferrari

Ferraris are distinguished by an unmatched combination of beauty, power and responsiveness – and a unique sound that is as carefully tuned as a piece of music.

The sound is a big part of the Ferrari experience. With their V12 and V8 engines and carefully crafted intakes and exhausts, they emit an explosion of sound that resonates with Ferrari’s statement of purpose – to provide the driver with the ultimate experience in every moment of his journey.

The first time you drive a Ferrari and hit the throttle, several things happen to you.

Firstly, your head is snapped back by the sudden power of the unleashed engine. At the same time, you are completely engulfed by a huge explosion of beautiful sound that is unlike any other car – it is like nothing you have ever experienced before.

Then, at the end of the ride, you feel of the brakes is so good that you have more confidence to bury the throttle pedal again and again.

Sounds like a Ferrari

Brüel & Kjær’s Desktop NVH Simulator enables you to evaluate, modify, and design NVH data interactively, by driving in a virtual scenario using authentic car controls and feedback. The scenario, shown on desktop monitors, allows quick changes between different vehicles, systems, and components.

The Ferrari Sound
The importance of the Ferrari sound to customers is borne out by chat on the Ferrari website and by customer surveys that show that the vast majority of customers are excited about it. “It’s a major part of our brand image,” says Francesco Carosone, Senior Acoustic Engineer.

“The NVH Simulaton was a groundbreaking solution for us.
Francesco Carosone
Senior Acoustic Engineer

It’s not unusual for car companies today to artificially modify engine sounds in their cars with amplifiers or loudspeakers, an option that Ferrari is not considering:

“We have the authentic sound that other car companies want to create artificially, and we intend to keep it that way,” 

This commitment to the purity of the sound creates significant challenges for the company. One of the largest is complying with noise regulations, both at racetracks and on public streets. Virtually all countries have legislation to limit noise from cars, especially in cities where it can be a major problem.

The legislation also imposes rules on racetrack noise, and racetracks themselves often impose additional regulations. An additional challenge is delivering such levels of exciting sound, while also making the car comfortable on a long journey.

“Our customers want a loud sound, a high decibel level, this means you can’t hide
– it has to be beautiful. We need to tune the sound quality carefully, usually by balancing the intake and exhaust” 
Francesco Carosone

Virtual NVH Sound Targets

It can, however, be time-consuming and expensive to swap different components of the car’s intake and exhaust system and listen to the difference. In 2013, Ferrari streamlined the process by installing a Brüel & Kjær NVH Simulator that allows virtual prototyping to achieve engine sound targets rapidly and cost-effectively.

The NVH Simulator enables vehicle design and development teams to make the best possible use of customer preference and satisfaction input, set accurate NVH targets, design with specific differentiation to competitors, and work efficiently with all NVH data throughout the development process.

“The Ferrari sound is an immediately recognizable trademark. Ferraris are sporty, extreme cars and the sound needs to embody that. Our goal is to give all our cars the sound that is expected from them.”
Francesco Carosone
Senior Acoustic Engineer

Ferrari engine

According to Francesco, “The NVH Simulator was a groundbreaking solution for us. It is becoming an integrated part of our NVH product development, and we are spending ever-increasing time using the simulator to fine-tune the results we want to achieve.

CAE Simulation - NVH Sound Simulation software

Optimizing the design with CAE

... In the concept phase, we can change the shape of different components of the intake and exhaust systems, and we can use the simulator to hear the sounds of the different design concepts directly from the CAE (Computer-Aided Engineering) model without prototyping.

This makes it possible to evaluate and exploit components that would have been too time-consuming or even impossible to test before.

Ferrari has also installed a hexapod in their test lab, which is a cockpit simulator for cars built on hydraulic actuators to simulate the experience of driving a new vehicle. The hexapod features additional actuators to provide more rotation, which improves realism in hard cornering.

To visually stimulate the racetrack a 180-degree widescreen is setup, while the Brüel & Kjær NVH Simulator provides fully accurate sound. The hexapod system allows test drivers to experience and evaluate a car’s handling and sound together in a highly authentic context.

Ferrari sound

The Sound of Ferrari 

Automotive software

Even though Ferrari focuses heavily on performance, their use of sound simulation is part of a larger trend driven by environmental concerns, as the automotive market moves towards smaller engines, and electric and hybrid vehicles.

The challenge for the entire industry is to create cars with a strong performance that are at the same time environmentally acceptable, and yet maintain their brand sound and feel. 

“Ferrari has developed hybrid technology,” says Francesco, “it combines internal combustion and an electric engine and is currently in production. We always have to produce better cars, better performance, and that special sound."

Adopting a Brüel & Kjær NVH Simulator, Ferrari aims to develop their driving experience even further.

Francesco Carosone

Senior Acoustic Engineer, responsible for exhaust and overall sound quality Joined Ferrari in 1999 Worked in NVH testing department and moved to the NVH Concept department four years ago.

Also, a musician, playing classical piano and composing pop and theatre music On his bedside table, “The Physics of Musical Instruments”, a book with acoustic theories that can be used in his work with sound in Ferraris, which he graduated from La Sapienza University, Rome, in 1994.


Ferrari S.p.A.

Ferrari S.p.A. is based in Maranello, Italy. Founded by Enzo Ferrari in 1929 as Scuderia Ferrari, the company sponsored drivers and manufactured racing cars before moving into the production of
street-legal vehicles as Ferrari S.p.A. in 1947.

Ferrari has approximately 3,000 employees, 500 of them within the Formula 1 division.

Throughout its history, the company has been noted for its continued participation in racing, especially in Formula 1, where it has had great success. Ferrari road cars are one of the world’s best-known brands, generally seen as a symbol of speed, luxury, and wealth.

Ferrari produces around 7,000 cars a year, and typically with a one- to the two-year waiting list.