arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

TYPE 4138

1/8" PRESSURE-FIELD MICROPHONE, EXTERNALLY POLARIZED

Pressure-field microphone designed for very high-frequency measurements in confined spaces with a frequency range of 6.5 Hz to 140 kHz.

img

TYPE 4138

expand_more
chevron_left
chevron_right

Type 4138 is designed for high-level and very high-frequency measurements and measurements in confined spaces. Being externally polarized, Type 4138 must be used with a classical preamplifier.

  • High-level and very high-frequency measurements
  • Pulse measurements
  • Applications which require a high degree of spatial resolution or where space is limited, for example, model testing
TYPE 4138
Standard IEC 61094
Sound field Pressure field
Polarization voltage 200V
Sensitivity 1 mV/Pa
Lower limiting frequency 6.5 Hz
Higher limiting frequency 140 kHz
Inherent noise 43 dB(A)
Upper limiting of dynamic range 168 dB
Diameter 1/8 inch
Venting Side
Minimum Temperature -30 °C
Maximum Temperature 100 °C
Minimum Temperature -22 °F
Maximum Temperature 212 °F

USE OF PRESSURE-FIELD MICROPHONES

Pressure-field microphones should be used for making measurements in small, closed couplers or close to hard, reflective surfaces. Such microphones are optimised to have a flat frequency response in a pressure field. Because of its small size, Type 4138 can also be used for random-incidence measurements at audio frequencies, where its frequency response is less dependent on angle of incidence.

POLARIZATION VOLTAGE

Type 4138 requires an external polarization voltage and therefore must be used with a classical preamplifier such as Brüel & Kjær Type 2670 together with 1/8-inch to 1/4-inch Adaptor UA-0160.

CALIBRATION

The sensitivity of Type 4138 can be calibrated at 250 Hz using Pistonphone Type 4228, or at 1 kHz using Sound Calibrator Type 4231, in both cases using Adaptor DP-0774.

The pressure-field response can be measured using Electrostatic Actuator UA-0033 with Actuator Adaptor DB-0900.