SLB700A/06VA2-1

Strain transducer with 4-20mA output

Strain transducer with strain gage measuring system,
Nominal (rated) strain 500 µm/m
Output: 4 to 20mA,
Screw-on type,
Fixed cable, 6 m long

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

SLB700A/06VA Active Strain Transducer: A Cost-effective Sensor with Integrated Electronics for Extremely High Forces

The SLB700A/06VA is a strain transducer with integrated electronics, which can easily be attached to structures with screws. If force is applied to the structure, the SLB700A/06VA reliably measures the resulting strain. Since the strain is often proportional to the force, the strain sensor can be used to measure the applied force, provided a corresponding calibration has been made. This principle is also called ‘measurement in the force shunt’.

The SLB700A/06VA active strain transducer is simply as robust as the passive version, that is, the SLB700A. However, the active SLB700A/06VA is more cost-effective, owing to its integrated measuring amplifier. The advantage of this attractively priced sensor is that it enables even extremely large forces to be measured in a reliable manner. The machine dynamics remain unaffected.

The teach-in procedure for the electronics utilized in the SLB700A/06VA is very simple. It only requires a measurement to be taken at the maximum force and another measurement at zero force. The output signal is scaled between these two points; irrespective of the strain level, the maximum possible signal will be transmitted to the next level in the measurement chain (refer to the explanation provided below).

The sensor materials withstand most of the oils used in applications involving presses and are rustproof.

Practical

Easy mounting using four M6 screws
Oil-resistant and a highly flexible cable, suitable for drag chains
Compatible with the version without an amplifier; the two versions are interchangeable since they have identical dimensions and hole patterns

Proven for years in production environments: Easy retrofitting of machines is possible due to the full compatibility of active and passive strain sensors.

Cost-effective

A cost-effective solution that provides an alternative to force sensors, particularly in cases of involvement of large process forces
The machine dynamics remain unaffected
Extremely cost-effective measurement chain, particularly due to the integrated bridge amplifier
Calibration is easy, owing to the HBK teach-in procedure

Extremely cost-effective; enables extremely large forces to be measured, even on a tight budget. No additional electronics are required. An optimal resolution is guaranteed due to the teach-in procedure.

All-inclusive

HBK also provides sensors for the calibration of the SLB700A/06VA
Our service staff looks forward to calibrating your measurement chain for you

The cost-effective complete solution, ready to measure, available on request

SLB700A/06VA1 / 06VA2 - Data Sheet	Data Sheets	English
SLB700VA - Mounting Instructions	Mounting Instructions	English, French, German

SLB700/06A/VAx - CAD

CAD Step Files

Key attributes for strain transducers
Type/technology	Strain Gauge
Capacity (strain)	500 μm/m
Capacity (strain)	500 μm/m
Output signal	Current (4-20mA)
Degree of protection	IP65
Mechanical adaptation	Bolted
Minimum Temperature	-20 °C
Maximum Temperature	60 °C
Minimum Temperature	-4 °F
Maximum Temperature	140 °F

Main Menu

Main Menu

Main Menu

Main Menu

Strain transducer with 4-20mA output

Practical

Cost-effective

All-inclusive

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We haved moved ${referer} to www.hbkworld.com