T210

All-Round Torque Measurement Solution

Precise acquisition of torque and rotational speed in test stands.
Numerous possible applications within the industry environment.

NEW: Now available as cost-effective digital sensor with IO-Link interface. Configure your T210 here.

T210

expand_more

chevron_left

chevron_right

Shaft Torque Sensor T210: Measurement of Rotating Torque up to 200 N·m

The torque transducer T210 features a precise measuring system which transmits the measurement values as well as the supply energy in a contactless way from the rotor to the stator. Additionally, the rotational speed and the angle of rotation are captured. These values are transmitted via classical analog signals or with the advanced digital interface IO-Link. With these features the T210 shaft torque sensor is well-equipped to be used universally and is often found in End-of-Line applications or in development test benches. Finally, the round shaft ends allow for an easy and free of play integration. Thanks to its standardized design, almost all existing plants can be effortlessly retrofitted with T210.

HBK Accuracy Class: 0.1
Nominal torque: 0.5 to 200 N·m
Nominal rotational speed: up to 30,000 min^-1
Speed measurement: 512 Imp./rev.; optional: 1024 Imp./rev. and angle

NEW OPTION with IO-LINK INTERFACE!

Besides the known standard outputs (frequency and analog), the T210 is now available with an IO-Link interface.

The T210 shaft torque transducer has gone digital and now features optional IO-Link. Leading to fast measurements, reduced costs, greater efficiency, and increased reliability. At the same time, it offers you all the familiar advantages.

Process data: Torque, speed, angle, power, temperature
Output signal: Digital signal in accordance with the IO-Link Smart Sensor Profile
Filter: Bessel, Butterworth. Cut off frequency 1 kHz
Linearization: Table or coefficients for cubic, quadratic functions
Statistics: Maximum, minimum, peak to peak, average, and more
Limit switches: Two digital limit switches. One permanent available, one if data transmission is switched off

Simple integration

Downward compatible with the T21WN
Familiar mounting hole pattern
Compact design
Round shaft ends guarantee backlash-free connection
Maintenance-free
3D models (STEP files) available

User-friendly integration both in the planning phase and during installation and operation.

Measurement technology

9 nominal torque ranges: 0.5; 1; 2; 5; 10; 20; 50; 100; 200 N·m
Output: Either voltage and frequency or digital (±10 V; 10 kHz ±5 kHz; IO-Link)
Linearity deviation ≤ ±0,05 %
Measuring bandwidth up to 1 kHz

Precise and universal!

Filter

Measurement range keyboard_arrow_down
Measurement range keyboard_arrow_down
Nominal rotational speed keyboard_arrow_down
Size (length) keyboard_arrow_down
Size (length) keyboard_arrow_down

Code	Measurement range	Measurement range	Nominal rotational speed	Size (length)	Size (length)
1-T210/0.5NM	0.5 Nm	4.43 in-lb	30000 rpm	95 mm	3.74 in
1-T210/1NM	1 Nm	8.85 in-lb	30000 rpm	95 mm	3.74 in
1-T210/2NM	2 Nm	17.7 in-lb	30000 rpm	95 mm	3.74 in
1-T210/5NM	5 Nm	44.3 in-lb	20000 rpm	145 mm	5.71 in
1-T210/10NM	10 Nm	88.5 in-lb	20000 rpm	145 mm	5.71 in
1-T210/20NM	20 Nm	177 in-lb	20000 rpm	145 mm	5.71 in
1-T210/50NM	50 Nm	443 in-lb	14000 rpm	170 mm	6.69 in
1-T210/100NM	100 Nm	885 in-lb	14000 rpm	170 mm	6.69 in
1-T210/200NM	200 Nm	1770 in-lb	14000 rpm	170 mm	6.69 in
K-T210	0.5 Nm, 1 Nm, 2 Nm, 5 Nm, 10 Nm, 20 Nm, 50 Nm, 100 Nm, 200 Nm	4.425 in-lb, 8.851 in-lb, 17.701 in-lb, 44.253 in-lb, 88.507 in-lb, 177.015 in-lb, 442.537 in-lb, 885.074 in-lb, 1770.149 in-lb	30000 rpm, 20000 rpm, 14000 rpm	95 mm, 145 mm, 170 mm	3.94 in, 5.709 in, 6.692 in

T210 - Data Sheet

Data Sheets

English

Certificates and Approvals

T210 - EU Declaration of Conformity

Declaration of Conformity

English

T210 IO Link capacity 0,5Nm-2Nm - CAD	CAD File
K-T210 IO Link capacity 5Nm-20Nm - CAD	CAD File
T210 IO Link capacity 50Nm-200Nm - CAD	CAD File
T210 nominal (rated) torque 0.5 Nm - CAD	CAD File
T210 nominal (rated) torque 1 Nm - CAD	CAD File
T210 nominal (rated) torque 2 Nm - CAD	CAD File
T210 nominal (rated) torque 5 Nm - CAD	CAD File
T210 nominal (rated) torque 10 Nm - CAD	CAD File
T210 nominal (rated) torque 20 Nm - CAD	CAD File
T210 nominal (rated) torque 50 Nm - CAD	CAD File
T210 nominal (rated) torque 100 Nm - CAD	CAD File
T210 nominal (rated) torque 200 Nm - CAD	CAD File

T210
Type (rotating/non-rotating)	Rotating
Measurement range	5 Nm, 200 Nm, 0.5 Nm, 2 Nm, 20 Nm, 100 Nm, 50 Nm, 10 Nm, 1 Nm
Measurement range	44.3 in-lb, 1770 in-lb, 4.43 in-lb, 17.7 in-lb, 177 in-lb, 885 in-lb, 443 in-lb, 88.5 in-lb, 8.85 in-lb, 4.425 in-lb, 8.851 in-lb, 17.701 in-lb, 44.253 in-lb, 88.507 in-lb, 177.015 in-lb, 442.537 in-lb, 885.074 in-lb, 1770.149 in-lb
Transducer Type / Geometry	Shaft
Nominal rotational speed	20000 rpm, 14000 rpm, 30000 rpm
Accuracy class	0.1
Size (length)	145 mm, 170 mm, 95 mm
Size (length)	5.71 in, 6.69 in, 3.74 in, 3.94 in, 5.709 in, 6.692 in
Weight (material)	Steel
Integrated speed measurement	true
Marine certification	None
Output signal	Voltage (+/- 10V), Frequency
Minimum Temperature	-20 °C
Maximum Temperature	85 °C
Minimum Temperature	-4 °F
Maximum Temperature	185 °F

List of accessories available for all variants of this family

Product Code	Description
1-4413.0031	Bellows Coupling 150 N·m [Ø26/Ø26 mm]
1-4413.0032	Bellows Coupling 200 N·m [Ø26/Ø26 mm]
1-4413.0021	Bellows Coupling 30 N·m [Ø16/Ø16 mm]
3-3301.0159	Connection cable, 680 free ends, 10m
1-VK20A	Junction box for T21WN, T20WN and T22
3-3301.0158	cab. 12pin, male-fem/free ends PVC l=5m
1-KAB151A-1.5	Connection cable T21WN, T20WN, D-Sub15
3-3312.0268	Connector Cable Screw
1-KAB152-1.5	Connection cable MP01 and SR01
1-4413.0013	Bellows Coupling 10 N·m [Ø16/Ø16 mm]
1-4413.0003	Bellows Coupling 1 N·m [Ø6/Ø6 mm]
1-4413.0011	Bellows Coupling 2 N·m [Ø6/Ø6 mm]
1-4413.0023	Bellows Coupling 60 N·m [Ø26/Ø26 mm]