arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

arrow_back_ios

Main Menu

2673 型

½英寸传声器前置放大器带插入电压设施

设计用于通过插入电压技术校准 ½" 和 1" 电容式传声器

img

2673 型

expand_more
chevron_left
chevron_right

设计用于通过插入电压技术对 ½" 和 1" 电容传声器进行校准,可与互易方法或已知声源结合使用。插入校准装置用于根据IEC 1094 – 1对电容传声器进行互调和插入电压校准:1992 和 ANSI S1.10。

  • 电容传声器的插入电压校准,用于开路电压的确定
  • 电容传声器的互易校准方法校准
  • 与 HBK 电容传声器相关的通用声音测量
TYPE 2673
Polarization Classical
Lower frequency 30 Hz, 3 Hz, 250 Hz
Higher frequency 200 kHz, 10 kHz, 200000 Hz
Diameter 1/2 inch
Minimum Temperature -20 °C
Maximum Temperature 60 °C, 80 °C
Minimum Temperature -4 °F
Maximum Temperature 140 °F, 176 °F
Connector Lemo 7-pin
Calibration facility None, CIC

Features

  • Full electromagnetic compatibility (EMC)
  • Detachable cable for easy installation
  • Compact LEMO connector for connection to instrument input socket (adaptor for Brüel & Kjær connectors provided)
  • Wide dynamic range
  • Very low attenuation

Type 2673 consists of a high impedance input stage and an output stage giving a low output impedance for driving long cables and the Driven Guard surrounding the input stage. The thread which accepts the microphone cartridge is isolated from the preamplifier housing to allow an insert-voltage signal to be applied in series with the microphone for determination of the microphone’s open-circuit sensitivity. ½-inch Microphone Preamplifier Type 2673 is very similar in design and performance to Type 2669. The main difference is that Type 2673 includes an insert voltage calibration facility.