TTS/500NM

Transfer torque wrench TTS/500N·m

TTS/500NM transfer torque wrench,
strain gauge measuring system
measuring range 100-500 N·m within
accuracy class 0.5 to DKD-R 3-7.
For the manual calibration of torque wrench calibration devices.
Included:
connection cable 3m with LEMO connector plug on
transducer side and 15 pin Sub-D-plug on amplifier side,
aluminium case, male square adapter 1".
***Note***
Calibration certificate per DKD-R 3-7 required, however,
not included in scope of supply.
To order the calibration certificate per DKD-R 3-7
separately,please use the following order code:
K-CAL-T-D-41-B-S-S-2-0

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

TTS Transfer Torque Wrench For Calibration

The TTS transfer torque wrench is used to check and calibrate torque wrench calibration equipment. It is precisely coordinated to the requirements of these calibrations, such as those prescribed in Guideline DKD-R 3-7.

Because of the particular type of torque generation produced by a torque wrench, the extreme resistance of the TTS to bending moments is a crucial criterion.

German Calibration Service (DAkkS) calibration as stipulated in DKD Guideline DKD-R 3-7 documents the stringent demands by which the TTS must be measured as a transfer standard.

A calibration certificate in accordance with guideline DKD-R 3-7 has to be ordered separately.

Also among the components supplied are a carrying case and an external square adapter in a standard size. Square adapters in other sizes are available as accessories.

Key Features

Nominal (rated) torques of 100 N∙m, 200 N∙m, 500 N∙m, 1 kN∙m and 3 kN∙m
Transfer transducers for calibrating torque wrench calibration equipment
Class 0.5 per DKD-R 3-7
Highly resistant to transverse and longitudinal forces as well as bending moments

TTS - Data Sheet	Data Sheets	English
TTS - Mounting Instructions	Mounting Instructions	English, French, German

Certificates and Approvals

TTS - EU Declaration of Conformity

Declaration of Conformity

English

Key Attributes: Torque Transducers
Type (rotating/non-rotating)	Non-rotating
Measurement range	500 Nm
Measurement range	4425 in-lb
Geometry (flange/shaft)	Shaft
Nominal rotational speed	0 rpm
Accuracy class	0.5
Size (length)	940 mm
Size (length)	37 in
Weight (material)	Steel
Integrated speed measurement	false
Marine certification	None
Output signal	Voltage (+/- 10V)
Minimum Temperature	-10 °C
Maximum Temperature	60 °C
Minimum Temperature	14 °F
Maximum Temperature	140 °F

Product Code	Description
1-TTS/AV-1/2	Outer square plug adapter 1/2" for TTS
1-TTS/AV-1/4	Outer square plug adapter 1/4" for TTS
1-TTS/IV-1/4	Inner square plug adapter 1/4" for TTS
1-TTS/AV-1 1/2	Outer square plug adapter 1 1/2" for TTS
1-TTS/IV-1	Inner square plug adapter 1" for TTS
1-TTS/IV-1/2	Inner square plug adapter 1/2" for TTS
1-TTS/IV-1 1/2	Inner square plug adapter 1 1/2" for TTS
1-TTS/AV-3/8	Outer square plug adapter 3/8" for TTS
1-TTS/AV-1	Outer square plug adapter 1" for TTS
1-TTS/IV-3/4	Inner square plug adapter 3/4" for TTS
1-TTS/AV-3/4	Outer square plug adapter 3/4" for TTS
1-TTS/IV-3/8	Inner square plug adapter 3/8" for TTS

Showing 10 of 12 results

Main Menu

Main Menu

Main Menu

Main Menu

Transfer torque wrench TTS/500N·m

TTS Transfer Torque Wrench For Calibration

Key Features

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com

We have moved ${referer} to www.hbkworld.com