1-CA80
1-X60
1-X60/A
1-X60/A-NP
1-X60/B
1-X60/B-NP
1-ABM75
1-BR120
1-RMS1-300
K-KAB-ML
应变片附件
应变片安装的质量不仅取决于应变片本身，还取决于应用类型及其实施。一个功能完美的测量点需要对应用表面进行彻底的处理，仔细的粘合，
Read More
XY T型应变花用于主方向已知的双轴应力分析。
XY（T型应变花）
Y系列T型应变花有120和350欧姆两种规格，有2个测量栅丝，彼此成90°排列。这些应变片的典型应用包括已知主方向的双轴应力状态分析以及拉压杆测量。
我们提供各种几何形状和尺寸的应变片，每种应变片的温度响应都适合以下材料：
在占位符“x”处插入温度匹配代码，以获得所需应变片的订购号。带有#的应变片仅适用于铝、铁素体和奥氏体钢的匹配
提供 120、350Ω应变片
测量栅丝由康铜组成，测量栅丝为聚酰亚胺
快速交付优选应变计型号 — 现货供应！
| Y Series - 數據表 | 數據表 | English |
| Y Series - 數據表 | 數據表 | German |
Certificates and Approvals
| Strain Gauges - 符合性聲明 | 符合性聲明 | English |
| Type/technology | Foil strain gauge |
| Application | Stress Analysis / structural testing |
| Geometry | T rosette |
| Measuring grid length | 3 mm, 6 mm, 1.5 mm, 0.6 mm, 10 mm |
| Measuring grid length | 0.118 in, 0.236 in, 0.059 in, 0.024 in, 0.394 in |
| Measuring grid width | 3.2 mm, 6.5 mm, 1.6 mm, 3.3 mm, 6 mm, 1.1 mm, 1.5 mm, 6.3 mm, 3.1 mm, 1 mm, 1.7 mm, 0.8 mm, 1.4 mm, 3 mm, 5.7 mm, 3.4 mm, 2 mm, 1.9 mm, 1.2 mm |
| Measuring grid width | 0.126 in, 0.256 in, 0.063 in, 0.13 in, 0.236 in, 0.043 in, 0.059 in, 0.248 in, 0.122 in, 0.039 in, 0.067 in, 0.031 in, 0.055 in, 0.118 in, 0.224 in, 0.134 in, 0.079 in, 0.075 in, 0.047 in, 0.256 mm |
| Carrier length | 9.8 mm, 16.5 mm, 8.3 mm, 6 mm, 9 mm, 23.3 mm, 14.4 mm, 23.5 mm, 14.5 mm, 8 mm, 10.5 mm, 7 mm, 7.7 mm, 17.5 mm, 10.9 mm, 18 mm, 5.7 mm, 6.5 mm, 9.9 mm, 16.2 mm, 15.2 mm, 4.7 mm, 6.2 mm, 10 mm, 12 mm |
| Carrier length | 0.386 in, 0.65 in, 0.327 in, 0.236 in, 0.354 in, 0.917 in, 0.567 in, 0.925 in, 0.571 in, 0.315 in, 0.413 in, 0.276 in, 0.303 in, 0.689 in, 0.429 in, 0.709 in, 0.224 in, 0.256 in, 0.39 in, 0.638 in, 0.598 in, 0.185 in, 0.244 in, 0.394 in, 0.649 in, 0.472 in |
| Carrier width | 10.6 mm, 18 mm, 8 mm, 4 mm, 5 mm, 10.5 mm, 7.3 mm, 11 mm, 7.5 mm, 6.3 mm, 6 mm, 12 mm, 7.6 mm, 4.3 mm, 5.3 mm, 14 mm, 6.7 mm, 7.9 mm, 9.6 mm |
| Carrier width | 0.417 in, 0.709 in, 0.315 in, 0.157 in, 0.197 in, 0.413 in, 0.287 in, 0.433 in, 0.295 in, 0.248 in, 0.236 in, 0.472 in, 0.299 in, 0.169 in, 0.209 in, 0.551 in, 0.264 in, 0.311 in, 0.378 in, 0.708 in, 0 in, 472 in |
| Temperature range | Standard (up to 200°C) |
| Nominal resistance | 120 Ohms, 350 Ohms |
| Gauge factor (measuring grid material) | Constantan (ca 2.0) |
| Temperature response | Ferritic steel (10.8 ppm/K; 6.0 ppm/°F), Aluminium (23 ppm/K; 12.8 ppm/°F), Austenitic steel (16 ppm/K; 8.9 ppm/°F), Silica / composite (0,5 ppm/K; 0.3 ppm/°F), Titanium / gray cast iron (9 ppm/K; 5.0 ppm/°F), Plastic (65 ppm/K; 36.1 ppm/°F) |
| Maximum elongation | Standard |
| Fatigue life | Standard |
| Connection configuration | Solder tabs with strain relief, Leads, Integrated solder tabs, Pre-wired (TPE-insulated ribbon cable) |
| Mounting | Bondable |
| Grid protection | Covered |
| Sub-Brand | HBM |
List of accessories available for all variants of this family
To optimize the measuring point documentation each strain gauge includes two stickers which can be placed next to the measuring point and near the measuring amplifier. Benefit from the parameter information directly in the measurement setup:
Please note: newly produced strain gauges all come with the sticker in stock, strain gauges still in stock do not have this feature yet.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
