PACELINE CLP 压电力垫圈由于其最小高度通常为 4 mm,几乎可以安装在任何位置。
CLP
PACELINE CLP压电负载垫圈的高度非常低，为3至5毫米。传感器可在无法安装标准力传感器的位置测量力。传感器具有集成电缆(0.5 米或 1 米长 ) , 是进行压电测量的经济高效方式。
通过将CLP负载垫圈与至少两个 CSW负载垫圈的不同安装方向相结合，可设置非常小的测量系统，以同时测量不同方向的力。
Ul.PACEline CLP 系列的压电微型力垫圈现在有三种新容量 (3 kN、14 kN 和 36 kN). 这意味着PACEline CLP现在可用于从 M2.5 到 M14 的所有行业标准螺钉连接。微型力传感器可以安装在非常小的装置中，无需调整大小或调整螺钉或螺栓连接。
绝对可靠的力测量， 即使在空间受限的情况下。
ONE 传感器，测量范围广 -,从几牛顿到几千牛顿。
完善的附件可以快速安装您的测量系统。安装时不需要额外的绝缘垫圈(由于电隔离)
| CLP - 數據表 | Data Sheets | English |
| CLP - 數據表 | Data Sheets | French |
| CLP - 數據表 | Data Sheets | German |
| CLP - 數據表 | Data Sheets | Italian |
| CLP - 數據表 | Data Sheets | Japanese |
| CLP - 安裝說明 | Mounting Instructions | English, Italian, French, German |
Certificates and Approvals
| PACEline CST/300,PACEline CHW,PACEline CFW,PACEline CFT+ / PACEline CFTplus,PACEline CLP,PACEline CSW - 符合性聲明 | Declaration of Conformity | English |
| PACEline CLP capacity 3 kN - CAD | CAD Step Files |
| PACEline CLP capacity 7 kN - CAD | CAD Step Files |
| PACEline CLP capacity 14 kN - CAD | CAD Step Files |
| PACEline CLP capacity 26 kN - CAD | CAD Step Files |
| PACEline CLP capacity 36 kN - CAD | CAD Step Files |
| PACEline CLP capacity 62 kN - CAD | CAD Step Files |
| PACEline CLP capacity 80 kN - CAD | CAD Step Files |
| Maximum capacity (nominal load) | 26 kN, 7 kN, 3 kN, 62 kN, 80 kN, 36 kN, 14 kN |
| Maximum capacity (nominal load) | 5.85 klbf, 15.7 klbf, 674 lbf, 13.9 klbf, 18 klbf, 1.57 klbf, 89 klbf, 3.15 klbf |
| Tensile / compression | Compression |
| Type / technology | Piezoelectric |
| Calibration | Not calibrated |
| Output signal | pC (passive piezoelectric) |
| HBK Accuracy class | 1 |
| Load cell design | Miniature sensor |
| Degree of protection | IP65 |
| Mechanical adaptation | Force washer |
| Height (without accessories) | 3.5 mm, 3 mm, 4 mm, 5 mm |
| Height (without accessories) | 0.138 in, 0.118 in, 0.157 in, 0.197 in |
| Diameter (without cable or plug) | 9.8 mm, 5.5 mm, 4.05 mm, 13.8 mm, 15.8 mm, 11.8 mm, 7.8 mm |
| Diameter (without cable or plug) | 0.385826 in, 0.216535 in, 0.1594485 in, 0.543306 in, 0.622046 in, 0.464566 in, 0.307086 in |
Measuring direction of the PACEline CLP sensor. The load washer measures in the direction of the blue arrow (Fx). If you want to measure force in a horizontal direction (measuring shear forces), we recommend using HBM's PACEline CSW load washers.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
This will bring together HBM, Brüel & Kjær, nCode, ReliaSoft, and Discom brands, helping you innovate faster for a cleaner, healthier, and more productive world.
