The LE11 is an encapsulated resistive linear strain gauge with stranded wire that withstands adverse conditions.
特別封入構造 (LE11)
The LE11 is an encapsulated strain gauge with an IP67 degree of protection (in compliance with the chemical resistance of the adhesives). A 1-meter-long stranded connection wire with fluoropolymer insulation is included in the scope of supply. The LE11 strain gauge is encapsulated in a special plastic material and is, therefore, moisture proof and resistant against chemicals (with the exception of highly concentrated acids such as sulfuric or nitric acid). The LE11 comes with a 2-wire or 4-wire connection. The nominal (rated) resistance is 350 ohms and the temperature response is adapted for steel.
Moisture proof and resistant against chemicals
Excellent zero signal stability with changing moisture.
Wire material is resistant against environmental threats and electrical leakage.
Code | 名前 |
---|---|
1-LE11-3/350VE | Strain gauge 3/350VE LE11 |
1-LE11-3/350ZE | Strain gauge 3/350ZE LE11 |
Sales documents
Strain Gauges - データシート | Data Sheets | English |
Certificates and Approvals
Strain Gauges - 適合宣言 | Declaration of Conformity | English |
Type/technology | Foil strain gauge |
Application | Stress Analysis / structural testing |
Geometry | Linear |
Measuring grid length | 3 mm |
Measuring grid length | 0.118 in |
Measuring grid width | 2 mm |
Measuring grid width | 0.079 in |
Carrier length | 15 mm |
Carrier length | 0.591 in |
Carrier width | 9 mm |
Carrier width | 0.354 in |
Temperature range | Limited temperature range |
Nominal resistance | 350 Ohms |
Gauge factor (measuring grid material) | Constantan (ca 2.0) |
Temperature response | Ferritic steel (10.8 ppm/K; 6.0 ppm/°F) |
Maximum elongation | Standard |
Fatigue life | Standard |
Connection configuration | Fluoropolymer-insulated connection wires |
Mounting | Bondable |
Grid protection | Other |