3DM-CX5-GNSS/INS

3DM-CX5-GNSS/INSオールインワン・ナビゲーション・ソリューションは、GPS、GLONASS、BeiDou、Galileo衛星コンステレーションを利用した高性能な統合型マルチコンステレーションGNSSレシーバーを搭載しています。センサーの測定値は完全に校正され、温度補正され、正確な出力のために直交座標系に数学的に整列されています。高度に線形化されたセンサー性能と自動適応型推定フィルター・アルゴリズムにより、実世界の動的条件下で極めて正確な計算出力が得られます。

CX製品ラインは、大量生産向けに設計されたコスト効率の高いシステム・インテグレーター向けパッケージで、GXシリーズと同じ機能をすべて備えています。

3DM-CX5-GNSS/INS

expand_more

chevron_left

chevron_right

Code	名前
6271-0160	3DM-CX5-GNSS/INS 2G,75DPS
6271-0260	3DM-CX5-GNSS/INS 2G,300DPS
6271-2260	3DM-CX5-GNSS/INS 4G,300DPS
6271-4260	3DM-CX5-GNSS/INS 8G,300DPS
6271-4760	3DM-CX5-GNSS/INS 8G,900DPS
6271-7260	3DM-CX5-GNSS/INS 20G,300DPS
6271-7760	3DM-CX5-GNSS/INS 20G,900DPS

3DM-CX5-GNSS/INS Data Sheet	Data Sheets	English
3DM-CX5-GNSS/INS - Quick Start Guide	Quick Start Guide	English
Inertial Sensor Utils Software - Manual	手動	English
3DM-CX5-GNSS/INS Data Communications Protocol - Manual	手動	English
3DM-CX5-GNSS/INS - User Manual	手動	English
3DM-GX5/CX5/CV5 Firmware Changelog - - Technical Note	Tech Notes	English
Micro D-to-USB Communication and Power Cable	Accessory Guide	English
Micro-D to RS232 Communication and Power Cable	Accessory Guide	English
6212-3006 OEM Cable Kit	Accessory Guide	English
6212-3009 DEVELOPMENT KIT, USB, INERTIAL C-SERIES	Accessory Guide	English
6212-3013 ANTENNA KIT, GNSS, U.FL	Accessory Guide	English
Craft Cable with Micro DB9 and Flying Leads	Accessory Guide	English
6212-3010 DEVELOPMENT KIT, RS232, INERTIAL C-SERIES	Accessory Guide	English
When to Use Capture Gyro Bias - Technical Note	Instructions For Use	English
C-Series Connectivity Board Interface Control Document	Mounting Instructions	English
Using Hardware Datalogger with Inertial Sensors	Instructions For Use	English

Certificates and Approvals

3DM-CX5 and 3DM-CV5 Declaration of Conformity (EU)	Declaration of Conformity	English
3DM-CX5 and 3DM-CV5 Declaration of Conformity (UK)	Declaration of Conformity	English
MicroStrain REACH-SVHC Compliance Declaration	Declaration of Conformity	English

MicroStrain 5-Series Inertial Sensor Firmware

Firmware

3DM-CX5-GNSS/INS
Type	Inertial Navigation (INS)
Performance Grade	High Performance Grade
Features	Accelerometer, Gyroscope, Magnetometer
Random Walk	Accel: 20 µg/√/Hz, Gyro: 0.3 °/√hr
Bias Instability (Gyroscope)	8 °/hr
Bias Instability (Accelerometer)	40 μg
Hysteresis	Accel bias: 4.8 mg, Accel gain: 300 PPM, Gyro bias: 0.12 °/s, Gyro gain: 300 PPM
Communication Port Type	Samtec FTSH series
Communication Interface	TTL serial, USB
Update Rate	IMU: 1000 Hz, EKF: 500 Hz
Inputs/Outputs	3xGPIO
Weight	8 g
Weight	0.282 oz
Size	38 mm x 24 mm x 9.7 mm
Size	1.49 in x 0.94 in x 0.38 in
Power Consumption	0.5 W
Input Voltage	3.2 V to 5.2 V
Minimum Operating Temperature	-40 °C
Maximum Operating Temperature	85 °C
Minimum Operating Temperature	-40 °F
Maximum Operating Temperature	185 °F
MTBF	400094 h
GNSS Constellations	GPS/QZSS, GLONASS, Galileo, BeiDou
GNSS Frequency Bands	L1C/A, L10F, E1B/C, B1
Sensing Range (Accelerometer)	2 g
Sensing Range (Gyroscope)	75 °/s
Sensing Range (Magnetometer)	8 Gauss
Sensing Range (Pressure)	1260 mbar
Accuracy	Roll/Pitch (static): 0.25 °, Heading (static): 0.8 °, Position (static): 2m horizontal, 5m vertical
Ingress Protection Rating	Not Rated
Housing Material	Aluminum
Software	MSCL, ROS, SensorConnect
Mounting Style	Embeddable, Screw Down, Precision Alignment

Software

chevron_left

InertialConnect
SensorConnect
SensorCloud
MSCL and MIP SDK

chevron_right

InertialConnect Screenshot - GNSS Statuses

InertialConnect is the preferred software solution for MicroStrain inertial sensors. With InertialConnect, you can easily configure your sensors, adjust parameters, upgrade firmware, and deploy preconfigured parameter files. You can also verify sensor outputs with intuitive visualizations, including times eries data, position data, and statuses.

InertialConnect is compatible with both PC desktop and Linux operating systems, making it your go-to solution for precision and efficiency in inertial sensor management.

Learn More

SensorConnect is the next generation in desktop sensing software.

From configuration of nodes and starting networks, to collecting and analyzing data in real-time, SensorConnect provides a modern, powerful experience with our Wireless, Inertial, and Displacement products.

Using our intelligent data collection and graphing algorithms, you are able to visualize massive amounts of data instantly, and then zoom in on points of interest just as fast.

Built in MathEngine functionality allows for both real-time and post-processed math, such as generating FFTs, averages, RMS, etc.

Learn More

SensorCloud is a unique sensor data storage, visualization, and remote management platform that leverages powerful Cloud computing technologies to provide excellent data scalability, rapid visualization, and user programmable analysis.

MicroStrain sensors can instantly upload their data to SensorCloud via an ethernet-connected WSDA-2000. Once uploaded, your data is securely stored in the Cloud and can be accessed from anywhere, or downloaded for offline use.

Configurable alerts can be set to help notify you of real-time event in your data.

MathEngine allows you to perform analytics on your data, all in the Cloud. Pre-built functions are available for ease of use, while IPython Notebooks allow advanced users to write custom scripts to be run on their data once, or on a schedule.

Visit SensorCloud navigate_next

The MicroStrain Communication Library (MSCL) is our open-sourced API that simplifies writing code to interact with our sensors. MIP SDK is a lightweight C/C++ library for interacting with MicroStrain G and C-series products via baremetal and resource constrained microcontrollers.

Both APIs are readily available and fully-documented on GitHub, featuring valuable tools such as full documentation, example code, and a quick start guide.

Learn More About MSCL

Main Menu

Main Menu

Main Menu

Main Menu

3DM-CX5-GNSS/INS

Software