MAIN MENU

WI-T+

Conf. Min. Displ. Transd. K-WI-T+, probe

Configurable miniature displacement transducer
Displacement probe design
Very compact size
Inductive measurement system
Selectable output signal:
-40 mV/V - + 40 mV/V (passive)
0-10 V, 4-20 mA or IO-Link

img

Conf. Min. Displ. Transd. K-WI-T+, probe

expand_more
chevron_left
chevron_right

K-WI-T+: Inductive Displacement Measurement Device with Compact, Probe-type Design - ready to be configured in accordance with your needs

Find bellow some explanations to our options.

Measuring range

The WI-T+ is available in three different measuring ranges: 0...2 mm (002W), 0...5 mm (005W) and 0...10 mm (010W).

Cable length

The standard version is supplied with a 3-meter cable (03M0). Additionally, the displacement transducer is available with a cable length of: 1.5 m (01M5).

Transducer identification

You can order the sensor with a TEDS (Transducer Electronic Data Sheet) chip for transducer identification. TEDS allows you to store the transducer data (characteristic values) in a chip that can be read by a connected measuring device (with an appropriate amplifier).  HBK records the TEDS data at the time of delivery, so no amplifier parameterization is necessary.

NOTE: TEDS chips are not available for sensors with amplifier modules or variants without a connector. Standard delivery does not include a TEDS chip.

  • T = With TEDS
  • S = Without TEDS

Electrical connection to end of cable

We can mount a plug or a amplifier module on the end of the cable upon request.

  • Y = Free ends, no amplifier
  • F = 15-pin D-sub-HD connector, for connecting to MGC+, Scout, MP85, and other HBK amplifiers
  • Q = 15-pin HD-sub-HD connector, for connecting to many HBK signal conditioners in the Quantum series (MX410, MX440, MX840, MX430, MX238)
  • P = 14-pin ODU connector, degree of protection IP68, for connecting to all HBK amplifiers of the Somat XR series that are suitable for measuring full bridge circuits
  • VA1 = With inline amplifier 0 … 10 V
  • VA2 = With inline amplifier 4 … 20 mA
  • VAIO = With inline amplifier IO-Link (digital output)

Firmware version

If you order a WI-T+ with the VAIO option, you will get the latest firmware version, unless you choose an older version that is still available.

  • N = No firmware
  • IW01 = Firmware version 2.0.2
Language keyboard_arrow_down
WI - Quick Start Guide Quick Start Guide English, Italian, French, Chinese, German
WI - Data Sheet Data Sheets English
WI - Mounting Instructions Mounting Instructions English, Italian, French, Chinese, German
WI - Datasheet Data Sheets German
WI - Data Sheet Data Sheets French
WI - 數據表 Data Sheets Chinese
WI - Data Sheet Data Sheets Italian

Certificates and Approvals

WA - EU Declaration of Conformity Declaration of Conformity English
WA - UKCA Declaration of conformity Declaration of Conformity English
Key Attributes: Displacement Transducers
Type/technology Inductive
Application Cost effective
Measurement range 2 mm, 5 mm, 10 mm
Measurement range 0.079 in, 0.197 in, 0.394 in
Degree of protection IP67
Output signal Passive, Voltage (0…10V), Current (4-20mA), IO-Link
Mechanical connection Probe
Linearity deviation 0.2 %
Shaft diameter 8 mm
Shaft diameter 0.315 in
Length 66 mm, 79 mm, 95 mm
Length 2.6 in, 3.11 in, 3.74 in