FS62RSS

Optical Config. Rugged Strain Sensor

FS62RSS - Configurable Rugged Strain Sensor
- Fiber Bragg Grating (FBG) based sensor built with
newLight® technology.
- For strain measurements in harsh environments.
- Applicable by embedment in concrete.
- ±2500μm/m measurement range. Definable cable length,
connector types and wavelengths.

expand_more

chevron_left

Overview
Documents
Downloads
Specifications
Accessories

chevron_right

FS62RSS – Rugged Strain Sensor

Embedded version for concrete structures with deformations still below the serviceability limit state, with a measurement range of ±2500µm/m. This embedded strain sensor is delivered with holes on the anchoring discs to support the installation, namely when the sensor is to be kept in between rebars, measuring strain on concrete. An installation accessory is also available to support on installations where the sensor is to be kept next to and aligned with the rehinforcing rebars.
Surface mount version for all types of drillable materials, with a measurement range of ±5000µm/m
For temperature corrected measurements, consider using the FS63RTS temperature sensor

FS62RSS newLight - Data Sheet	Data Sheets	English
FS62RSS, FS63RTS newLight - Mounting Instructions	Mounting Instructions	English

Key Attributes: Strain Gauges
Type/technology	Fiber Bragg Grating
Application	Optical stress measurement
Geometry	Linear
Measuring grid length	5 mm
Measuring grid length	0.2 in
Measuring grid width	0.195 mm
Measuring grid width	0.008 in
Carrier length	138 mm, 240 mm
Carrier length	5.4 in, 9.4 in
Carrier width	30 mm, 50 mm
Carrier width	1.2 in, 2 in
Temperature range	Limited temperature range
Nominal resistance	Other resistance
Gauge factor (measuring grid material)	FBG (ca. 0.79)
Temperature response	No matching of temperature response
Maximum elongation	Enhanced
Fatigue life	Enhanced
Connection configuration	Optical fiber
Mounting	Embeddable, Bolt able
Grid protection	Other

Product Code	Description
1-FS-SPLITTER	Fiber Optic Splitter
1-FS84-FS62RSS01	FS62RSS rebar alignment mounting support
1-KLEBEBAND	Fixing tape
1-FS80-100	Optical interconnection FC/FC
1-FS80-300	Optical interconnection SC/SC
1-FS81-1M	Polyester Optical Patch Cable 1m FC
1-FS82-2M	Aramid Optical Patch Cable 2m FC
1-FS82-5M	Aramid Optical Patch Cable 5m FC
1-FS83-2M	Armor Optical Patch Cable 2m FC
1-FS83-5M	Armor Optical Patch Cable 5m FC
K-FS82	Configurable Aramid Patch Cable
K-FS83	Optical outdoor patch cable